Buy Low Price From Here Now
* Semicircle saw blade * Grout remover * Carbide grit * 2-1/2"
Readmore
Technical Details
- 2-1/2-Inch, StandardSee more technical details
By GalvezGuy (Galveston, TX, USA)
I am using this blade to cut out Hardie Plank siding around windows,vents, and fixtures. It cuts fast and clean with a minimal abount of dust. I am not sure if I would use this on grout like others have, the blade is too thin for that application.
By Hb Builders Inc. (Telluride, Co)
I used this blade to remove sanded grout ( 1/2" W X 1/2" Depth) and about 30' in length. It worked pretty damn good... The blade just wore out too fast, so I bought a couple more. It would be nice if the replacement blades were a little cheaper though. I might purchase the diamond coated blades next time, even though they are about $20 more a piece they should last longer. Plus the Rockwell tool is nice and not as loud as the FEIN for about twice as much...
By CardiffArms (MA, USA)
I bought the Sonicrafter kit "Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit", and the Carbide Grit Segment saw blade was included as one of the attachments. Unfortunately the thing is made from what can only be described as "a thin bit of tin", and as soon as it touched the first thing I tried to cut, the 'teeth' that connect it to the Sonicrafter shaft rounded off! I thought maybe I hadn't tightened the screw enough so offset it by one tooth and tried again. Basically the metal is so thin that it's not physically possible to really tighten the screw enough to hold this in place, so it rounded the teeth again. So it's for the trash, and I haven't even used it once!
Having said all that, I have successfully used other attachments (which are made of thicker material) to cut through drywall and wood. One of the jobs I bought this for was grout removal, but haven't tried that yet.
I haven't had the problem of the attachments coming loose, but I can imagine that over time that might start to become a problem. A quick release mechanism would have been better, especially if you have a variety of tasks to do in short order, but for now I'm trying to minimize the blade changes in order to avoid wearing out the screw.
By Mischel Turner (Aurora, CO)
This is truly the handiest tool ever. Use it for almost every repair and craft you can think of! The carbide blade works perfectly for removing grout from tiles.
Images Product
Buy Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece Now
0 comments:
Post a Comment