Buy Low Price From Here Now
MK Diamond 157222 -170 Wet Cutting Tile Saw MK-170 Features: • Versatile and compact tabletop tile saw designed with the "do-it-yourselfer" • High-torque universal motor • High-impact thermoplastic water reservoir • MK-Safeswitch™ prevents saw from being operated when locking key is removed • 7" diamond blade & submersible water pump included • One-year limited warranty Motor 115V / 60Hz Horsepower 1/2 HP RPM 5,500 Blade Capacity 7" (178mm) Arbor Size 5/8" (16mm) Length of Cut 12" (300mm) Depth of Cut 2" (51mm) Weight 15 lbs. (6.8kg) LxWxH (inches) 17 x 14 x 12 LxWxH (mm) 423 x 356 x 305 Shipping Method UPS / Fed-Ex
Readmore
Technical Details
- 7-inch bench wet tile saw- 1/3-horsepower engine for high torque (5500 rpm) and power
- High-impact thermoplastic water reservoir will not rust or peel
- Includes saw, 7-inch diamond blade, submersible water pump, adjustable rip guide
- 15 pounds; 1-year warranty
See more technical details
By W. Kerr
I bought this saw to replace my 120sqft kitchen floor with 12in ceramic tiles. The saw arrived quickly and in good condition. Assembly was not difficult, although the instructions for attaching the tubing to the pump were not clear and I struggled a bit to get the tubing on. Otherwise, the saw easily cut all the tile I needed. The plastic fence is flimsy, but it works well enough. As the directions state, you need to make sure the fence is parallel to the blade. I only needed to do this once at the initial setup. When moving the fence, be sure to lock down the front end of the fence while the back side is loose, and tighten the back side second. This helped keep the fence square. As with all wet saws, water went everywhere. However, I thought this saw was particularly bad at containing the water. I had to refill once every third tile, which seemed a hassle IMHO. There was not enough margin between the required minimum and maximum levels when you're losing water at such a high rate. It didn't help that it was also a little difficult to determine the water level (difficult to see if the pump was covered). One other small issue was that the saw would move in the tray during the cutting process and press the fence against the back of the tray. I had to shift the saw away from the back of the tray to move the fence. In summary, I am very happy with the saw. I am a tiling novice, but my floor came out fantastic with the help of this saw. I have other tiling projects planned (bathroom and laundry), so it made sense for me to buy a saw instead of renting.
By T. Gorman
We recently remodeled our kitchen and I tiled the back splash in tumbled Durango limestone tiles. The saw cuts were accurate as long as the user takes the time to set up guides and checks measurements. The blade cut through the tiles(approx. 3/8 inch thick) with little effort. I strongly suggest using the machine outside as it gets a little messy with spray. Also,change water frequently to keep down the dust. The cost to rent a machine would have been $75 for the day. For a little more you have the saw for as long as needed.
By M. May (Virginia)
Swanson Tool SO107 12-Inch Speed Square I recently purchased the MK-170 and used to cut tiles for a kitchen backsplash.As stated in some of the previous reviews,I also found adjusting and setting the fence between cuts time consuming.As an alternative,I removed the fence and replaced it with a Swanson 12 inch speedsquare.The lip on the base of the square fits nicely on the MK-170 base.With the tile firmly positioned against the side of the square with the right hand,the left hand can quickly slide the square to position the tile for cutting.This method worked great for 6x6 tiles and should work good for most cuts on 12x12 tiles. For me the price and the above method make the MK-170 a solid 5 star buy.
By Erik R. Stevens (redondo beach,CA)
good price.loud saw.this thing will scream at you.motor is fine.i cut the center of a piece of plywood out in the shape of the tray the saw sits in.set the saw in it and put he whole thing on horses.put the water filler tube in a five gal bucket of water.the guide is the worse piece of s**t i've ever used.good luck its only a 130$ bucks what do you expect.good for the handyman.
By G. Darden (NJ)
After purchasing a home in need of a complete renovation, I took it as a personal challenge to do the job myself. There were a number of tools in in my inventory, however a tile saw was not one of them. I thought about renting one, but once you go past 24 hrs, your better off buying one. With so many choices and vendors to select from, it became apparent that one should always remember the "Golden Rule", you get exactly what you pay for......Stay away from the inexpensive (under $100)saws. They are (for the most part) designed for the smallest of jobs. The Mk-170, priced at the cost of a a long weekend rental, is a saw that gets the job done. No hassel's no fuss. Read the directions, follow the safety tips, make use of the splash guard.....and your job will look like a "Pro" did it. Cut tile for a 200 Sq Ft kitchen, with not one bit of trouble. What sold me on the MK was the fact that my (Nat'l)Home improvement store used it to cut store bought tile, however did not offer it on the sales floor with other models that could be purchased. That was good enough for me. GREAT SAW!
Images Product
Buy MK Diamond 157222 MK-170 1/3-Horsepower 7-Inch Bench Wet Tile Saw Now
0 comments:
Post a Comment