Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor

Buy Cheap Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor

Buy Low Price From Here Now
For smoother, quieter cuts, a single FORREST Dampener-Stiffener is highly recommended for all applications. Made from top-quality saw steel and precision ground to within 0.001" of side runout. For best results, select one stiffener 1/2 to 2/3 the blade diameter and mount it against the outside of the blade.
Readmore

Technical Details

- Saves 1/3 wood loss on each cut
- Feeds easily when used for moderate rips and crosscuts on a table saw
- Reduces "jump in" for better "pull-control"
- Eliminates bottom splintering on radial crosscuts
- With new 30-degree ATB tooth style this blade stops totally; all bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

 "Works great!" 2009-08-26
By J. Bennett
I use this on my table saw with a thin kerf blade. Seems to have less wobble, though there wasn't much to begin with.

 "Works good" 2009-02-25
By F. Mcconnell
I use it on my dewalt portable it gives smoother cuts only drawback is you can't cut as deep with it.

 "Good investmen, but forrest needs to ship the non-rusty product" 2008-08-15
By JD (Houston, TX United States)
I bought forrest stif05 & Forrest WW10407100 Woodworker II 10-Inch 40 Tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor at Amazon.



I try the blade w/o dampener and stiffener then w/ it. I see a improvement on hardwood when ripping.



The only thing I don't like. I receive the product in rusty condition.



I can't recognize the Forrest print on the dampener. I may send email to Forrest to ask why. Maybe Forrest may not know what's going on after package the dampener and put it in storage. On the woodworker II blade, The joint carbide tip and the blade has similar condition, but it was ship with protect vinyl around the edge.

 "might be useful for some people" 2008-08-09
By rcb (Austin, TX United States)
This didn't really do anything for me. Of course, my old makita table saw was totally stable before I put it on. It just didn't add anything. Maybe if you had some kind of problems with your blade wobbling, you might appreciate this.

 "See no benefit" 2008-06-18
By wauwis (midwest)
I see no benefit whatever. It does reduce the depth of cut from whatever your saw allows (3"+) to 2.5 inches. For cutting hardwood with minimal burning, Forrest recommends setting the blade as high as possible. The stiffener limits it to 2.5" cut.


Images Product

Buy Forrest STIF05 5-Inch Saw Blade Dampener and Stiffener with 5/8-Inch Arbor Now