Buy Low Price From Here Now
Enhance the quality of your dadoes with Freud's SD508 Eight-Inch Super Dado Set with Anti-Kickback Design. Designed to produce smooth, chip-free dadoes and grooves every time, this set is designed to take on a wide range of materials, from hardwoods to laminates. For exceptional precision, the blade width can be adjusted in 1/32-inch increments, while the included shim set allows for even finer adjustments.
 |
 |
 |
 |
 |
The perfect dado set for the fine cabinetmaker or weekend woodworker, the Freud SD508 produces dadoes and grooves that meet with flush, even edges. So you can be assured of precise cuts every time, the set is equipped with precision-grade features, starting with two proprietary razor-sharp outside blades.
These high-quality eight-inch, 24-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece.
Flexibility for Cutting Hardwoods, Veneers, and More
The Freud SD508 fits all table saws and radial-arm saws and accommodates a wide range of materials, so you can keep it on hand from project to project. Use it to create dadoes and grooves in hardwood, softwood, chip board, plywood, and laminate (not recommended for non-ferrous materials).
Adjustable Dado and Shim Set for Achieving Perfect Width
Producing the perfect dado is often reliant upon finding the perfect blade width. Designed with that mind, this set virtually doubles the number of slot widths available. First, its adjustable dado allows exceptionally fine-tuned adjustments in 1/32-inch increments. It also features a handy shim set for those jobs that call for even finer blade-width adjustments.
And for greater versatility, the set's six chippers include a unique 3/32-inch chipper along with four 1/8-inch chippers and one 1/16-inch chipper. These chippers' four-wing design is a step above the common two-wing design of most chippers. This means your chippers will work efficiently to remove waste material and smooth the edges of your work pieces.
Anti-Kickback Design for Safe Operation
The quality of this dado set is enhanced by its anti-kickback design, which gives you an added margin of safety while you work.
MicroGrain Carbide Tips for Long-Lasting Performance
So you can get maximum performance out of this set, the blade components are constructed with Freud's TiCo Hi-Density Carbide. This means the blades can withstand numerous sharpenings and still retain their superior precision. And a Tri-metal Brazing process gives the blades impact resistance, so they last for the long term without dulling (a condition that can cause torn wood and uneven cuts).
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing its own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud SD508 Eight-Inch Super Dado Set with Anti-Kickback Design, including two eight-inch blades (with 5/8-inch arbors), shim set, four 1/8-inch chippers, one 3/32-inch chipper, and one 1/16-inch chipper.
Readmore
Technical Details
- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish- Cuts dado widths from 1/4" to 29/32".Includes a 3/32" chipper, ideal for cutting dados for today's undersized plywoods.
- Set includes two outer blades,six chippers, Dado Tips & Tricks DVD, shim set, and storage case.
- Cuts all composition material, plywood, hardwoods, and softwoods.
- Freud's Limited Lifetime Guarantee
See more technical details
By Carlgo (Carmel Valley, CA)
My first dado cutter was an ancient Sears non-carbide wobble type. It was pretty useless, of course, and years later I sprung for this Freud set. It was somewhat cheaper than the Forrest product, so this is what I chose.
I am happy with the quality of these blades. They are extremely thick and rugged, obviously good quality. Mine had no trace of rust or damage.
They certainly do a nice and safe job. I cannot say that the bottoms are perfectly smooth, but they are flat. The side blades do a nice job of not splintering the wood. Needless to say that they are a huge step up from the usual beginner-level of dado cutting.
A warning to first-time users: dado blades are a pain to install, no matter the brand. To really get the widths set correctly you have to make a test cut, take it all apart, play with shims and do it again. Wide widths on underpowered saws have to be done in stages. You will want to do all of your grooves at one time and not switch back and forth. Dado cutting demands good planning and careful set-up.
I like the case. It is sturdy, easy to use and very useful.
Many woodworkers use various router set-ups to make grooves and there are times when that makes sense, but for those perfectly sized grooves and clean cuts nothing matches a good dado set. If you do this kind of work, then this set is a good choice. If you want to spend more, then certainly the Forrest dado set would be a very nice choice indeed.
Surprisingly, the blades and chippers lost that perfect sharpness in fairly short time. To be fair, I was using a lot of ply and particle board then, and they don't seem to have gotten any duller since. While they didn't stay as sharp as my other Freud blades, they still work fine, even in my under-powered table saw. Still, that and the not perfectly smooth groove bottoms lose this set a star.
I would like to find a place that could do a good job of sharpening and radiusing them. They look like they could be resharpened many times as the carbide is thick. This is all part of the Industrial Life, so we have to deal with it.
By Dan Briggs (CA, USA)
I have this set in the 6" size, and the less expensive 8" in the professional series. While the 6" does seem to hold "slightly" tighter tolerances IT DOES NOT MAKE SMOOTHER BOTTOMS than the 8" set AND the tolerances are so tight on the shaft that sometimes it takes up to 30 mins. and lots of cussin, to get multiple chippers off the motor shaft. Save urself time and money with the 8" professional set........
By Jason Wiles (United States)
Most of us consider a $200 set of table saw blades to be quite an investment. Certain things are expected with a purchase like this. Packaging that is the exact same as what surrounds a barbie doll is not one of them. My $100 cordless drill has a thick case with secure latches and solid support for the drill. Imagine the disappointment when I opened the amazon box and discovered a flimsy plastic case that looks like it should contain a toy. No big deal I thought, until I opened the case and found a broken plastic clam shell surround, with paper thin clam shell discs separating the blades. Now I read some reviews from folks who commented positively on this case. Seriously!? This is dollar store packaging. Indeed, the same stuff your take-out meal is packed with is the exact same material your new $200 stack dado is surrounded by. Thank goodness the blades were OK and are outstanding. Sharp, heavy, well made, with minimal batman ears on the cuts. Blades certainly worthy of a solid, secure case and surround. The only reason I didn't give this 3 stars or lower is because of the quality of the blades, which is what really matters. If you are planning on using this set on job sites you better plan on building a custom case for them as this one won't last a farting spell. I already have plans to construct them a real storage case, however for $200 I shouldn't have to.
By Richard N (United States)
I am in the process of removing the contractor installed shelving in my wife's laundry room, and I am replacing them with a whole bunch of base cabinets and wall cabinets that I am building. These cabinets will occupy the entire length of two adjacent walls.
The cabinet boxes are built out of 3 / 4 inch Oak laminate plywood. The cabinet side panels and back panels all have a 3 / 4 inch wide and 3 / 8 inch deep dado to receive the cabinet bottom and a 3 / 4 inch wide and 3 / 8 inch deep rabbit to receive the cabinet back.
I made the dados and the rabbits with a brand new, right out of the box Freud SD508 Super Dado Set. The resulting cuts were spectacular. I was more than pleased. As a matter of fact I was really excited to see the beautiful cuts this dado set made.
The cuts were clean. There was no chipping of the laminate, no tear out, and as near as I can tell, the bottom of the dado was perfectly flat. The dado set cut through the plywood with ease. I didn't have to apply any more force to the piece then I would have if I were doing a simple rip using a single blade.
These stellar results were repeated time after time on all the cabinet back panels and side panels. I realize that this dado set was right out of the box and therefore the blades and chippers were probably the sharpest they will ever be, but if the exceptional results I got on this project is any predictor of how this dado set will perform over time then I know that I made a very good purchase and the money was well spent.
By Lummm
I purchased the blade based on numerous reviews in magazines and on on-line forums. However, it does leave scoring marks on the outside right blade. Other than that a 5-STAR purchase. Also the price was great too!
Images Product
Buy Freud SD508 Super Dado 8-Inch Stack Dado Now
0 comments:
Post a Comment