Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

Buy Cheap Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now
For chop saws and radial arm saws. These top-quality miter saw blades produce perfectly cut miter joints. Made with double-hard C-4 submicron carbide for up to 300% longer life. A heavier than normal steel plate and a negative face hook maintain maximum stability for the best cut. Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality. The tooth style (4 points and a flat) maximizes steady, clean cuts with no bottom splintering. You will be amazed by the extra-smooth, tight cuts you will get with this blade.
Readmore

Technical Details

- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

 "Love it!" 2009-09-18
By S. Tierney
I was looking for a great blade for my new Milwaukee 6955-20 Miter Saw (Amazing Saw by the way), and had tried a Freud Diablo, which cost around $75. It made a terrible noise, and cut a little rough, so I contacted Diablo (they said it sounded like the blade had a tension flaw) and I returned it. This Forrest blade arrived today to replace it, and WOW, what a blade. I made several cuts in plywood, and there was almost NO splintering on top or bottom, and the cut itself was smooth as glass. It works beautifully in the Milwaukee, and I'll hopefully never buy another blade that's not a Forrest - I'm hooked. Get over the sticker shock if you have it, and get the blade, you will not be disappointed, it truly is a case of getting what you pay for.

 "Forrest Miter Saw Blade Makes Smooth Accurate Cuts" 2009-09-08
By G. Swanson (Durham, NC USA)
I was doing some repair work on some walls in the house. I needed to buy a quality saw blade for my miter saw. I bought the Forrest ChopMaster based on the outstanding professional and user reviews on the internet. I have not been disappointed, all cuts were precise, clean, smooth, and accurate.

 "Glass-smooth trim cuts on a miter saw" 2009-08-12
By Michael Sandman (Brookline, MA United States)
Having finished framing a room, I wanted a better quality of cut for the trim. I replaced the 60 tooth Bosch OEM blade that came on my 12 sliding compound miter saw with the 80-tooth Forrest Chopmaster. The cuts are glass-smooth, with no tearout. You can see and feel the difference between the Forrest blade's results and the cuts with the OEM saw, even though Bosch supplies a pretty good blade for framing. The Chopmaster was expensive enough to make me think twice about this vs. a Freud blade, but all the reviews have been very positive. Now I can see why.

 "Great blade!" 2009-03-21
By Carol A. Johnston (Portland, IN)
I've had my Makita miter saw for several years and just started using the Chopmaster--what a difference! It cuts like butter--much better than the DeWalt blade I was using.

 "Good but expensive" 2009-02-25
By F. Mcconnell
I have 3 chopmaster blades two chop saws and one for a table saw.There very good blades but they will go dull like other less expensive blades.I rate it slightly better than my CMT blade but it cost twice as much.I like that Forrest will replace the teeth and straighten the blade but you can get very good blades for much less.


Images Product

Buy Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor Now

Read more “Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor”

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Cheap Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
10" x 80 Tooth, Diablo Ultra Fine Finish Blade, Red Perma Shield Coating, Stabilizer Vents, Carbide Tipped, Thin Kerf Design.
Readmore

Technical Details

- 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

 "Excellent Blade" 2009-03-08
By Joe the trim guy (Wheaton, IL United States)
There is not a lot to say about this blade that hasn't been covered already. I tried Freud blade years ago and wasn't all that impressed. A few months ago I needed a blade for my 8 1/2" saw and all the big orange store had that day where Freud. I was impressed, so when I needed a blade for my 10" I ordered this blade.



The cuts are flawless. I have cut oak, poplar, maple, beech, MDF and oak veneered plywood. No splintering or edge chipping. It cross cut the oak ply beautifully. The cut edges are very smooth. It also is one of the quieter blades I have used.



I will buy this again.

 "Great blade" 2009-02-05
By Al H. (Lewes, DE)
I'm a amateur weekend woodworker. This blade has been on my very cheap Delta plastic bench top table saw where I've abused it. I just removed it and put in on my Craftsman sliding compound miter saw. It works great on either saw... very smooth, and the machines do seem to run quieter. Overall, it made my inexpensive tools do better. I was burning cherry a little when I was cutting tapers with it and I thought the problem might be that the 80T was too much for ripping-- like, I couldn't get a fast enough feed rate? I tried the original Delta 30T ripping blade, and it cut fast, but rough. I'll go back to this blade. Since I had the blade off, I inspected, and no chipped teeth, and no wear on the red surface. That surface is holding up well-- but it might have contributed to the little burn I got on the cherry... I don't know. No heat marks and it still looked new, so cleaning was hardly necessary.

 "Made for plywood" 2009-01-10
By Bobby Stanley (Houston, TX)
When I have to cut plywood this is my go to blade. This blade does require a slightly slower feed rate as you would expect for the number of teeth. The results are spectacular and I mean that. I can't see spending any more money on a blade because the cuts are fantastic. When I use a zero clearance insert on my table saw, I get a perfect cut on the top and bottom every time. I could not be happier. I don't know how long you can use one of these blades. I have used mine for a couple of years and it is still sharp. I use my saw twice a week, however, I have cut probably 200 sheets of plywood with it. It really does a nice job with OSB as well.

 "No need for sandpaper!" 2008-11-26
By Craig Warrington (USA)
I wanted a good quality blade for my miter saw to use for trim and find detail work, and this blade has not disappointed. In truth, I have had good results with a much cheaper 40 tooth blade if I take my time and make a slower cut, but with this 80 tooth Freud there is no need to worry about speed.



When cutting materials the edge of the workpiece is actually so smooth I doubt you could improve upon it with 200 grit sandpaper.....it is actually that perfect. I wouldn't use this blade for rough cuts however - it is simply too expensive to waste on materials that don't need absolute precision. However if you are looking for a blade that works well for trim such as baseboards, window casings, or crown moldings - this blade is for you. The kerf is thin and the stability amazing almost to the point it looks like you cut the wood with a laser.



The only drawback or negative experience I had was while cutting MDF it cut the stock so fine that it left a ultra-thin powder sawdust floating through the air. The dust bag on my miter saw typically catches about 75% of the dust, but with the combination of MDF and this blade it didn't stand a chance and at least 70% of the dust simply floated through the air. Therefore, if cutting MDF a good dust collection system is recommended, and a dust mask would probably be a good idea as well if working indoors.



All things considered this is an amazing blade, and I am a believer that you really do get what you pay for. When it comes time to buy my next blade I will have no reservations about picking up another Freud.

 "Durable performer" 2007-07-16
By John Johnson (USA)
Very smooth cuts! The "rings" in the wood shine when held to the light! This is even after cutting a piece of 3/16" aluminum plate with it. Highly recommended, well worth the money.


Images Product

Buy Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Read more “Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating”