Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

Buy Cheap Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
For chop saws and radial arm saws. These top-quality miter saw blades produce perfectly cut miter joints. Made with double-hard C-4 submicron carbide for up to 300% longer life. A heavier than normal steel plate and a negative face hook maintain maximum stability for the best cut. Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality. The tooth style (4 points and a flat) maximizes steady, clean cuts with no bottom splintering. You will be amazed by the extra-smooth, tight cuts you will get with this blade.
Readmore

Technical Details

- 20° Face Hook for easy feed
- DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
- Ends second-step finishing (jointing and sanding not required).
- Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
- Ends cutting 1/16" oversize to allow for RESURFACING
See more technical details

 "Forrest Chopmaster 10 inch 80 tooth saw blad" 2009-12-15
By R. Stevens
I read other reviews of this item with some skepticism. I mean, could it really be as good as some people claimed? Yes it is. It is by far and away the best blade I've ever used in my miter saw. I've used it so far to cut cherry for a cabinet I'm building and I still can't believe how smooth the cuts are. Although I have not tried to finish a cut edge, from the look and feel of the cut there is no need to sand the cut edges. This blade is worth every penny that I paid for it.

 "Everything it claims to be" 2009-02-21
By PellaCPC (Northern Wisconsin)
I am a custom home builder and we do extensive wood trim in our homes. I bought this blade on the reviews and Forrest reputation, and have not been sorry. The blade performs flawlessly and will out-cut any of my Freud, De-Walt and other trim blades. Buy it - you won't be sorry.

 "Stairs Top 20 " 2008-01-31
By Michael N. Sanders
I love it, I like it, This blade stays sharp & I won't some more of them.

 "Swirls..." 2008-01-09
By Bruce A. Staats (Rochester, MN)
I have purchased two of these and sent both back. Test cuts showed swirls. I owned a prior blade and used it for years with excellent results. Their quality control has slipped.

 "Outstanding performance" 2007-09-06
By John Zygmunt (Philadelphia, Pa)
I have used many blades over the years yet i am still impressed every time I make a cut with this blade. I live by the rule: "you get what you pay for." You certainly get the best here.


Images Product

Buy Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor Now

Read more “Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor”

Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Cheap Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
10" x 40 Tooth, Carbide Tipped, Finishing Saw Blade, Thin Kerf.
Readmore

Technical Details

- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micro grain titanium carbide for extreme durability, razor-sharp cuts and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

 "Freud Diablo good value" 2009-09-22
By D. OGRADY (St Louis, MO USA)
Good blade for the price. Used in a 10" Rigid contractor's table saw, produces smooth rips and crosscuts in poplar, pine, MDF, and red oak with minimal tear out. Definitely cleaner than OEM Rigid blade, closs to Freud/Rigid topline blades if you don't force the cut and take your time. Would definitely buy again.


Images Product

Buy Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Read more “Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating”

Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Buy Cheap Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting.combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut.blades produce less heat keeping the cut edge crisp. Application: Plexiglass And Plastics
Readmore

Technical Details

- Laser cut blade bodies and expansion slots
- Kickback reducing design
- Tri-metal brazing
- Covered by Freud's limited lifetime warranty
See more technical details

 "Fantastic for Plastic" 2009-11-21
By Woodsmithy (Green Bay, WI USA)
This blade cuts Lexan and Plexiglass without the usual melting and cracking. Wish that I would have bought it years ago. I didn't buy it sooner because I didn't think that it could cut that much better, but it does. Save yourself a lot of frustration when cutting plactic, buy this blade.

 "amazing" 2009-01-03
By John W. Arnold (n. versailles, pa United States)
I PURCHASED THIS BLADE TO CUT 1/4" PLEXIGLASS, IT DOES THAT WITH A SMALL RESIDUE REMAINING AFTER THE CUTS. THESE FALL OFF WITH VERY LITTLE FINGER PRESSURE. MY PLEXIGLASS HAD NO PAPER BACKING. THIS BLADE ALSO CUTS WOOD AND PLASTIC...IT'S THE BEST CUTTING BLADE IN MY WORKSHOP. GET ONE AND SEE WHAT I MEAN. JOHN ARNOLD

 "Does the job" 2007-09-26
By kilograham
I used this to cut 1/2" Lexan for some windows- overall it did a great job, I did notice it took some bites but I don't know if this was the blade or my saw (powermatic 66). Cut finish was decent, and it didn't splinter or crack at all. With the cost of lexan I thought it prudent to get an appropriate blade, this one worked well.

 "Cuts plexiglass like it is butter" 2006-02-17
By C. Regan (KC,MO)
This blade rocks and was well worth the price. I use abs plastic and plexiglass quite frequently and I can honestly say that this blade is far superior vs. even my thin kerf 80 or 60 tooth freud blades. I used 1 inch thick lexan for its first test, no chipping it left very small fine shavings instead of little plexi chips. It is a very quiet blade as well. Overall I am very impressed with this product.


Images Product

Buy Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor Now

Read more “Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor”

Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

Buy Cheap Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

 "A must have for your table saw." 2009-10-18
By Russ Lyons (Lexington, KY)
I have this blade installed on my Grizzly 1023s. The quality of cut is incredible compared to blades in the $30-$50 dollar range that I have used before. I have used in on pine, ash and birch plywood and it cuts each without difficulty and no split out. The edges look as though they were sanded the cut is so smooth.

 "18 years and still the best" 2009-02-17
By C. R. Spiess (Fort Collins, CO USA)
I was reluctant to spend the money 18 years ago when I first bought this blade. I now see it as one of the very best investments I have ever made in tools.

 "Best saw blade out there" 2008-11-17
By Charles F. Poneleit (Sweetwater, TN United States)
I have probably over the 57 years into wood working never used as fine as the FORREST 10" Woodworker II saw blade. This is the best blade bare none on the market today. I also have the Forrest 8" dado King and the Forrest 12" 60 tooth miter saw blade. All exelent blades. I will owne or use no other.

 "excellent for low power saws" 2008-09-14
By F. Carrino
I have had this blade for a few months now and have used it to cut over 400 bd ft of hardwood (mostly walnut) with a Bosch 4000 portable Job-site table saw. I have used many different blades on this saw over the years (freud thin, Dewalt woodworker, etc etc) and this is the best blade I have ever used for this type of saw. The thin kerf is perfect for under powered saws. Now for my 3 hp Jet TS I use a full kerf blade (forrest is great as is the freud fusion) because the thicker metal is more stable and leaves a cleaner cut. I highly recommend this blade for ALL portable saws and any saw with less then 1 1/2 hp. It makes a very clean cut in both cross cuts and rips. This blade excels at cutting hardwoods and is worth the higher price.

 "Good Investment, not expensive when on sale for this high quality blade" 2008-08-15
By JD (Houston, TX United States)
I buy this woodworker II 10" 40 tooth 3/64" kerf & dampener on Amazon.com

I cut & rip softwood & hardwood. The cut is a lot smoother with this blade comparing to Bosch blade shipped w/ 4000-09 table saw.



Price range is around $70-100.

Although it's a thin kerf 3/64" compare to 1/8" of original Bosch blade, the carbide teeth is at least 2x bigger. You can resharpen this blade several times.



The joint between carbide teeth and the steel is kind of rusty when I receive it. The teeth is protected by vinyl during S&H. I may send email to Forrest to ask why. I don't see it's affect the cut quality. Just wonder why it's like that on brand new blade.














Images Product

Buy Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor Now

Read more “Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor”

Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Buy Cheap Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Precision ground teeth for smooth, accurate cuts
- Fully hardened plate runs truer longer
- Heavy gauge high carbon steel for extended life
- 5/8" Arbor
See more technical details

 "Saw blade" 2009-06-27
By Terry Bromfield (albuquerque, nm USA)
Price is good,but doesn't last long at all.Made several cuts on a sheet of 4x8 plywood and the blade was already dragging and causing some burn marks on the cut.I have a good 3 Hp saw so it's not the saw it was the blade.

 "Junk do not buy" 2009-03-14
By Matt (Houston, TX)
Complete junk I tried to give it 0 stars. Could not cut 3/4 9 ply birch, 3/4 7 ply maple or 3/4 7 ply oak. It whines as if it is bound in the saw but its not. There is no burning on either side of the cut. It just will not cut.

 "Great for the price" 2008-01-09
By Tool Time Tim (Reno USA)
It works just fine. Not recommonded for high use, but good to make a few cuts on melinane every now and then.


Images Product

Buy Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor Now

Read more “Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor”

Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Cheap Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
Thin kerf circular saw blade is designed to give glass-smooth finishes when crosscutting hard and soft woods. Alternate top bevel, 7,000 maximum RPM, .098 plate, .116" kerf, +10 degree hook.
Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Unique side grind polishes the material to produce a superior finish
- Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
- Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
See more technical details

 "Great Blade" 2009-11-30
By Bruce (Utah)
This blade is great in my Makita sliding miter saw. Like so many others have reviewed, cuts are true and smooth. Rarely need sanding if I cut the length correctly. This is a AAA class blade, and I like being able to sharpen several times. Good value for the money if you want/need a top grade blade. I also use a few Tenryu Gold Medal blades in my other saws, and both Freud and Tenryu work great. I need my tools to be better than I am, and these blades do that.

 "Finish cuts" 2009-04-27
By David Dalzell (Sierra Nevada Mtns, CA)
I mostly make small boxes and jewelery boxes. With the 80 tooth Freud blade the miter and other joinery cuts I make are glue up ready and have no tearout. This is the best blade I have for fine joinery.

 "good for the right job" 2009-01-01
By S. Shaw (Indy, IN)
I gave it 4 stars because it is an O.K. blade. I bought it for cutting 3/4" oak plywood (table saw). I was happy with the results, but not impressed. It worked well with other types of wood. Would I buy again? Only if I had to, due to choices available at that time. Price should be $69.99 for what you get.

 "Its Good" 2008-05-22
By Hard Maple (Emmett, ID USA)
Super smooth cuts. But you can't really chop cut with the blade. You have to take a few extra miliseconds than you would with a 60 tooth, but you make that up in sanding and/or gluing time since the cut is now at about a 150-grit finish anyway. It seems to run quieter than the blade I replaced (can't recall the brand or model since its been on so long). And it fits snuggly on my 5/8" arbor, no play. All-in-all I find it an excellent blade for my second most important saw (my table saw has a Woodworker II).

 "use full kerf for cross cutting finish work" 2007-11-06
By Benjamin W. Stenzel (minneapolis)
I am thrilled with this saw blade. I have a 12 in for my mitre saw and a 10 in for my table saw. I only use them for cross cutting finish work. When the work is feed in to the blade slow the blade causes less tear out on the back side of the board than any other blade i have used. I have not been happy with other Freud blades. I ended up using them for rough cutting. But these are worth the money.


Images Product

Buy Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Read more “Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating”

Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

Buy Cheap Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
For radial saws and table saws. These all purpose blades give scratch-free polished cuts on wood. Crosscut up to 2" thick. Rip up to 1" thick. They have a 30 DEG alternate top bevel with a 5 DEG face hook on 10" diameters and smaller. (On 12" diameters and larger 20 DEG ATB). They are also made with double-hard and 40% stronger #C4 carbide. Thin kerf design saves 1/3 wood loss on each cut, feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. With the new 30 DEG ATB tooth style, this blade stops splintering on ply veneers on both radial saws and table saws.
Readmore

Technical Details

- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

 "the best blade hands down..." 2009-03-22
By John Rush (wash,dc)
forrest makes a great saw blade, and they stand behind it 100%... they also resharpen the blades when they inevitably get dull, and they come back as good as new, you cannot find a better product, anywhere... buy both the ripping and crosscut, and use them appropriately, and you will be glad you did....

 "Not always great." 2008-06-27
By Professional Woodworker (san francisco)
I have been a huge fan of Forrest blades, using them almost exclusively, but when I bought a second Woodworker I so I would have something to use while the other one is being sharpenned, I was greatly disappointed with what I received. The center bore was tighter than normal and all the cuts burned. I may be willing to pay twice the price for the quality, but the company better work twice as hard on quality control.



Amazon sent me a replacement, which I haven't tried yet, but I hope this isn't a sign that Forrest has gotten too big for itself. I'll jump ship if this happens again.

 "Great blade" 2007-02-13
By Woodworker (Georgetown Texas)
This is the highest quality blade I have used in 20 plus years of woodwork.

 "The Best" 2006-10-05
By Malgorzata E. Zaluska (New York)
This is quality. The blade works like a hot knife to butter, enhances the cutting power of your machine. Freud nor Amana come close to this. It is pricey; double what a Freud blade would cost. Though you can send this back to the manufacturer for a resharpening at a smaller cost than a new blade.

 "Dick Nelson, Palatka Florida" 2003-04-12
By Richard L. Nelson (Palatka, Fl USA)
I have had this blade for a year and a half..I can say that it is the best of the best. I now will have to have it resharpened, my fault,I did not scan first, cutting some "old salvaged" 2 x 4 and just happened to get into some dry wall screws. Believe it ! it still give an ok cut but I want it better..I would buy another in a second if needed.


Images Product

Buy Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor Now

Read more “Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor”

Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor

Buy Cheap Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
Kerf: .096". Plate: .071". Carbide Grade: C3 micrograin. Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw. Lubricants are recommended when used for this application. Good for woodworking and cutting plastics. Tungsten carbide triple-chip grind produces clean cuts.
Readmore

Technical Details

- Circular saw blade ideal for cutting wood and plastics
- Triple chip design perfect for use on brass, aluminum, copper, and other light metals
- 72 long-lasting tungsten carbide teeth
- 5/8-inch arbor fits most 10-inch miter saws
- 10-inch diameter; 5-year limited warranty
See more technical details

 "Two blades in one!" 2009-06-09
By V. Ellisor (Austin, TX)
This is an excellent blade for aluminum and plastics. It produces exceptionally smooth cuts in extruded and bar stock, and chip and heat free cuts in 1/2 inch Lucite. An excellent value.

 "High Quality at a fair price" 2008-07-05
By Ben Franklin (Liberty,PA USA)
Used to cut a number of aluminum tubes, cuts with minimum effort. Holds up to weekly use on extrusions, why pay more?

 "Hitachi Blade" 2008-04-05
By Carol Eve Streator
We are very pleased with the Hitachi blade.

A very reasonable price as well!!

 "Clean Cuts" 2007-10-30
By Miller Craine (Chicago, IL)
Using a sliding miter saw, I cut an aluminum extrusion with a rolled up door screen inside. This blade cut cleanly through the assembly.


Images Product

Buy Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor Now

Read more “Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor”