Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals

Buy Cheap Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals

Buy Low Price From Here Now

Readmore

Technical Details

- Professional grade C-1 carbide
- Negative hook angle
- Triple chip tooth grind
- Precision ground carbide tips
- Heat vents for cooler operation
See more technical details

 "what a pleasant surprise!" 2009-09-21
By dr. cliff (New Olreans, LA United States)
I bought this blade to demo the box off a 17' box van, all FRP panels and extruded aluminum 'bones'. The Sawzall with a demo blade was working but slowly and with the huge noise & vibration you expect from a Sawzall. So I tried this blade in my Makita Hypoid.



This blade is not some kind of last-resort, better-than-nothing solution for cutting aluminum. My Makita was eating aluminum about like it eats pine 2by lumber! Smooth, near-effortless cutting, easy to control, and the saw never really worked up a sweat. Hours of Sawzall work was done in about 15 minutes.



Two things you should know-



1. This blade makes A LOT of noise. Hearing protection is a must.



2. This blade spits aluminum 'sawdust' all over the place. It's not sharp like steel trimmings but it's aggravating. I brushed myself off with a whisk broom before going back in the house.

 "An outstanding aluminum cutting saw blade" 2009-08-22
By Joe T. Buchanan (Greensboro, NC United States)
This is an interesting story. I had an aluminum decorative fence to install in my backyard and went to Lowe's and Home Depot to find a non-ferrous blade. Neither had one in stock, so I turned to their web pages. In both cases, navigating their web pages was so laborious, I gave up. I figured there was no way that Amazon would have the blade, but I gave them a shot anyway. To my surprise, they had it! If I were Lowe's and Home Depot, I'd be very embarrassed.



Anyway, the blade has worked great. I have made over 100 cuts with it so far and it doesn't seem to be getting dull. Not only that, the blade cuts through aluminum cleanly and smoothly like a hot knife through butter. I really couldn't be more satisfied with my purchase.

 "Oshlum SBNF-072560 7-1/4 in. 60 tooth saw blade" 2009-05-30
By Larry L. Henderson
I have been cutting aluminum with a 36 tooth metal blade but I was not cutting a smooth cut. But what a diffrence The correct blade makes From now on 36 teeth blade is great for steel and 60 teeth blade for aluminum never too old to learn V/R Larry

 "Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade" 2009-05-03
By John Q. Consumer
This blade seems to be top-notch. I do not have experience with other non-ferrous metal cutting blades, but this one seems to do the job perfectly: Nice smooth cuts, without burrs or distortion. I was able to purchase this one for $19.99, plus $4.99 shipping, so it is one of the most affordable blades of this type available right now.


Images Product

Buy Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals Now

Read more “Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals”

Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor

Buy Cheap Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Anti-vibration slots
- Professional grade C-3 carbide
- Anti-kickback tooth design
- Aggressive hook angle
- Thin kerf for fast cuts
See more technical details

 "BEAM SAW BLADE" 2009-10-02
By Hippy Dave (Wisconsin)
What no one adresses in any reveiws for a beam saw is the fact that many saws are underpowered for blades this size.



The Oshlun blade performs well as ripping or cross-cut blade. I performed many full depth rips w/ the blade in reclaimed cedar beams. All things considered it performed like a champ. I wish the saw had more power (older style Makita beam saw) I was concerned the blade may pinch o rjam and cause a nasty kick back, or worse yet get too hot and start to wobble / wander. None of the above happened. I'm a carpenter by trade, this is my first time w/ a beam saw, so take it for what its worth - Good price and fast shipping.


Images Product

Buy Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor Now

Read more “Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor”

Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor

Buy Cheap Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Super thin kerf for fast cuts
- Professional grade carbide
- Heat vents for cooler operation
- Anti-kickback tooth design
- Expansion slots to prevent warping
See more technical details

 "You get what you pay for." 2009-02-22
By Phillip L. Carothers (ok)
Delivery from Amazon was excellent. This blade literally smokes wood. I does leave a clean cut so it gets a two. I had to fight it through 3/4" birch plywood. I would go with Freud or Forrest if you can afford it.

 "Finished the set" 2009-01-18
By Joe B (Atlanta)
This is a great blade that finished the set for my new Porter Cable 18 volt saw. Locally, even Home Depot and Lowes didn't have a 40 tooth blade and I had to go on line. Glad I did. It arrived in record time and in excellent condition. I was happily using it the day it arrived. Excellent value at even a higher cost.


Images Product

Buy Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor Now

Read more “Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor”

Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor

Buy Cheap Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Super Thin Kerf for Fast Cuts
- Professional Grade Carbide
- Aggressive Hook Angle
- Anti-Kickback Tooth Design
- Fits: Porter-Cable
See more technical details

 "Tried it and it's a mistake" 2009-08-21
By Builtmany (Scotch Plains, NJ United States)
Used on a Porter Cable Saw Boss this 6" blade is the worst I have had on my saw. I thought I would save a few bucks but after 2 cuts it came off so it's money wasted. Horrible & slow rough cuts on 2x4's and plywood both so it's really worthless to me. Spend a few $$ more and enjoy your saw and what it should be like.


Images Product

Buy Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor Now

Read more “Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor”

Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals

Buy Cheap Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals

Buy Low Price From Here Now
OSHLUN high quality steel cutting saw blades have been designed with C-6 carbide tips and a triple chip grind to cut through all types of mild steel/ferrous metals such as steel studs, piping, tubing, channel, flat stock, rebar and more. The special carbide resists breakage and lasts much longer than ordinary abrasive discs and other carbide grades. These blades leave a much cleaner cut, without the sharp burrs that abrasive discs leave behind.
Readmore

Technical Details

- Fits: Corded and Cordless Saws
- Max RPM: 4,600
- Professional grade C-6 carbide
- Laser cut expansion slots
- Triple chip tooth grind
See more technical details

 "Dimond Knoch won't knock out" 2009-06-30
By Howard E. Otton Jr. (Carolina Beach ,NC)
I guess it would have been a good blade , but I could not use it because

the dimond knock out would not knock out , and my saw had that type of arbor.

 "Very happy with this blade" 2009-04-20
By R. McCready (Maryland)
Up to this point, I have only used friction and abrasive blades to cut steel. I was skeptical of a blade that looks just like your standard wood blade would work well and could last. But I have been very happy with the speed and smoothness of the cuts, and so far, the blade seems to have remained quite sharp. I've only cut about four 1/2" dia. bolts and a dozen or so 1/2" rebar, so it's still a little early to tell how long it will remain sharp. But it has saved me a lot of time and has kept the metal much cooler than with other blade types. I'm very happy with it so far.

 "good money spent" 2009-04-08
By country bumpkin (silver city, oklahoma)
for r-panel 26 ga. sheet metal roofing:

fits dewalt battery powered saws ( as my experiance)and works exeptionally well in the field for ripping sheets to width however, if you are cutting valleys you can only expect about 100 lf.to 150 lf. of cut out of this blade, but it's better than the $40.00 demon blades sold by another company.

 "multi-use" 2009-03-29
By Richard Delhaie (Aashford CT USA)
I've been using this blade as a "nail cutter" for my cordless saw. I wouldn't want to cut a ton of wood with it, but that is not what it was made for -- rather slow cutting. However, in the nail infested old studs I was cutting, it worked like a charm. It is very well made.

 "Great blade and value" 2008-09-05
By Mark Backes
Great blade that fits most cordless skill saws. cuts thick and thin metals, iron, aluminum, even stainless steel


Images Product

Buy Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals Now

Read more “Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals”

Oshlun SBF-072552 7-1/4-Inch 52 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals

Buy Cheap Oshlun SBF-072552 7-1/4-Inch 52 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals

Buy Low Price From Here Now

Readmore

Technical Details

- Fits: Corded and Cordless Saws
- Max RPM: 5,800
- Professional grade C-6 carbide
- Laser cut expansion slots
- Triple chip tooth grind
See more technical details

Images Product

Buy Oshlun SBF-072552 7-1/4-Inch 52 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals Now

Read more “Oshlun SBF-072552 7-1/4-Inch 52 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Mild Steel and Ferrous Metals”

Oshlun SBW-055024 5-1/2-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 5/8-Inch Arbor (1/2-Inch and 10mm Bushings)

Buy Cheap Oshlun SBW-055024 5-1/2-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 5/8-Inch Arbor (1/2-Inch and 10mm Bushings)

Buy Low Price From Here Now

Readmore

Technical Details

- Super Thin Kerf for Fast Cuts
- Professional Grade Carbide
- Aggressive Hook Angle
- Fits: Makita, Craftsman, Skil and Ryobi
- Precision Ground Carbide Tips
See more technical details

 "Good Invest" 2009-07-10
By Jose Suaste
I bought 4 of this items, I could use them for later. They are less expensive than if you buy it at a hardware store.

 "Very Good but hard to find size" 2009-01-28
By Tool Owner (Wyoming, MI USA)
This is a very good carbide blade. I have used them for a long time and I am very happy with them. I wish then made a blade with more teeth, for fine cuts, that had carbide on them like this one does. All I can find is steel and it doesnt last as long as this one.


Images Product

Buy Oshlun SBW-055024 5-1/2-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 5/8-Inch Arbor (1/2-Inch and 10mm Bushings) Now

Read more “Oshlun SBW-055024 5-1/2-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 5/8-Inch Arbor (1/2-Inch and 10mm Bushings)”

Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor

Buy Cheap Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor

Buy Low Price From Here Now
This 16 piece stacked dado set is perfect for woodworker's who want a premium cut at an affordable price. Our woodworkers were amazed with the smooth, flat bottomed cuts from 1/4" to 29/32" wide. The precision ground C4 micro grain tungsten carbide tips cut through all types of hardwood, softwood and plywood with the greatest of ease - and stays sharp longer. Each set includes detailed setup instructions and an 8 piece shim set for fine adjustment. Includes two 42 tooth saws and six full body, 6 tooth chippers. 5/8" arbor.
Readmore

Technical Details

- Professional grade C-4 carbide
- Full body chippers
- Precision ground carbide tips
- Full color storage case
- Shim set for fine adjustments
See more technical details

 "Best dado blade I've used." 2009-08-31
By H S Truman (Independence, MO USA)
This is by far the best dado blade I've used. The blades cut smooth and leave a very nice flat bottom in the dado. I mounted these on a Skil contractor 10" table saw with a measly one horsepower motor and I had no problems cutting into 2x lumber, oak, walnut or mahogany. I highly recommend this dado set. I only wish they would make one with a 1" bore for my 12" table saw.

 "Oshlun stack dado is a great value" 2009-08-22
By Richard P. Beatty (Delaware)
Sure, the cardboard box is cheesy, but that's not why I bought this set. I'm making a chest that requires hundreds of dado cuts. I'm an intermediate woodworker and this dado set helped make quick work of it. The only issue I've had is some tearout when cutting cross-grain dado cuts in the edge of 3/4 inch oak, but I suspect this might have been an issue with any dado or maybe with my feed rate. Maybe finer teeth would help, I don't know... but that might compromise other performance. It seems very easy to get the exact cut width I want and the set looks like it will be very durable.

 "Great tool for precision slots and dados" 2009-07-05
By Art L. Peasall (Tampa Fl)
I am retired, just do woodwork as a hobby. I had one of the wobble type, but was time consuming to get a good cut. The oshlun sds- stack dado set is perfect.And with the shims that come with the set, the fit is up to you.

Could not be more satisfied.

Art

 "Great Purchase" 2009-06-19
By Phil B. (Aberdeen, MD USA)
I did a lot of research concerning a dado set and this one came to the top each time. There was a reason for that, because this is an outstanding addition to any woodworker's arsenal.

 "Cutting a Dado" 2009-06-13
By George L. Mccurdy (Perris, CA United States)
For 50 years I have endured the less then satisfactory results from my Sears adjustable dado- not that it didn't performed as advertised.



This Oshlun is like from heaven. All my dado's are letter perfect.

That plus the rapid delivery from Amazon satisfies all my needs.


Images Product

Buy Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor Now

Read more “Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor”