Buy Low Price From Here Now
Thin kerf saw blade for use with circular saws. Designed for cutting a variety of ferrous materials 3/32" and thicker including pipe angle iron, steel studs and conduit. .073" kerf, 0-degree hook angle, 5,000 max RPM.
Readmore
Technical Details
- Circular saw blade for cutting of ferrous materials 3/32-inch and thicker- Cermet-tipped for longer life, more wear resistant
- Hardened-steel body
- Vibration dampening
- 8-inch diameter; limited manufacturer warranty
See more technical details
By Alan P. White (Ely MN.)
The Milwaukee 42 tooth metal cutting blade works great for most metal cutting. I have a small welding shop and have used these blades for several years now, with great success. The inportant thing is not to push the saw and blade too hard through the metal. Let the saw and blade do the work. I would recomend this blade to anyone looking for a metal cutting blade.Milwaukee 48-40-4515 8-Inch 42 Tooth Ferrous and Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor
By Randy L. Friga (Springfield, MO)
The blades are the best value anywhere. I looked hard! The blades hold up well and have cut a lot of metal. I recommend the blades.
By Jw Siniscal (portland oregon)
has worked very well for trimming some 29 gauge sheet metal. Pkg says you can cut mild steel with it like angle iron but no details So I have bee afraid to try it. could not get an E-mail reply from the seller to confirm how heavy of steel it will safely cut.
Very good on thin stock though
By HTB (Ohio)
I bought this blade wondering if it would cut as I have heard it would. Not wanting to spend a lot for the whole saw I went for only the blade. Well I put it on my table saw and it cut very clean and with very few sparks. Now I did feed it at about 1/6th the speed of a piece of wood while cutting 3/16 inch thick steel. All I can say is it cut great, Very clean,cool to the touch in about 20 seconds or so. Was not sure if it would be to hot to touch so I waited the few sconds. Just use a face shield to protect your eyes from the very small slivers of metal.I never thought metal could be cut this clean and easy and almost spark free.
Images Product
Buy Milwaukee 48-40-4515 8-Inch 42 Tooth Ferrous and Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor Now
0 comments:
Post a Comment