Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals

Buy Cheap Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals

Buy Low Price From Here Now

Readmore

Technical Details

- Professional grade C-1 carbide
- Negative hook angle
- Triple chip tooth grind
- Precision ground carbide tips
- Heat vents for cooler operation
See more technical details

 "what a pleasant surprise!" 2009-09-21
By dr. cliff (New Olreans, LA United States)
I bought this blade to demo the box off a 17' box van, all FRP panels and extruded aluminum 'bones'. The Sawzall with a demo blade was working but slowly and with the huge noise & vibration you expect from a Sawzall. So I tried this blade in my Makita Hypoid.



This blade is not some kind of last-resort, better-than-nothing solution for cutting aluminum. My Makita was eating aluminum about like it eats pine 2by lumber! Smooth, near-effortless cutting, easy to control, and the saw never really worked up a sweat. Hours of Sawzall work was done in about 15 minutes.



Two things you should know-



1. This blade makes A LOT of noise. Hearing protection is a must.



2. This blade spits aluminum 'sawdust' all over the place. It's not sharp like steel trimmings but it's aggravating. I brushed myself off with a whisk broom before going back in the house.

 "An outstanding aluminum cutting saw blade" 2009-08-22
By Joe T. Buchanan (Greensboro, NC United States)
This is an interesting story. I had an aluminum decorative fence to install in my backyard and went to Lowe's and Home Depot to find a non-ferrous blade. Neither had one in stock, so I turned to their web pages. In both cases, navigating their web pages was so laborious, I gave up. I figured there was no way that Amazon would have the blade, but I gave them a shot anyway. To my surprise, they had it! If I were Lowe's and Home Depot, I'd be very embarrassed.



Anyway, the blade has worked great. I have made over 100 cuts with it so far and it doesn't seem to be getting dull. Not only that, the blade cuts through aluminum cleanly and smoothly like a hot knife through butter. I really couldn't be more satisfied with my purchase.

 "Oshlum SBNF-072560 7-1/4 in. 60 tooth saw blade" 2009-05-30
By Larry L. Henderson
I have been cutting aluminum with a 36 tooth metal blade but I was not cutting a smooth cut. But what a diffrence The correct blade makes From now on 36 teeth blade is great for steel and 60 teeth blade for aluminum never too old to learn V/R Larry

 "Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade" 2009-05-03
By John Q. Consumer
This blade seems to be top-notch. I do not have experience with other non-ferrous metal cutting blades, but this one seems to do the job perfectly: Nice smooth cuts, without burrs or distortion. I was able to purchase this one for $19.99, plus $4.99 shipping, so it is one of the most affordable blades of this type available right now.


Images Product

Buy Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals Now

Read more “Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals”

Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

Buy Cheap Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
For radial saws and table saws. These all purpose blades give scratch-free polished cuts on wood. Crosscut up to 2" thick. Rip up to 1" thick. They have a 30 DEG alternate top bevel with a 5 DEG face hook on 10" diameters and smaller. (On 12" diameters and larger 20 DEG ATB). They are also made with double-hard and 40% stronger #C4 carbide. Thin kerf design saves 1/3 wood loss on each cut, feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. With the new 30 DEG ATB tooth style, this blade stops splintering on ply veneers on both radial saws and table saws.
Readmore

Technical Details

- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

 "the best blade hands down..." 2009-03-22
By John Rush (wash,dc)
forrest makes a great saw blade, and they stand behind it 100%... they also resharpen the blades when they inevitably get dull, and they come back as good as new, you cannot find a better product, anywhere... buy both the ripping and crosscut, and use them appropriately, and you will be glad you did....

 "Not always great." 2008-06-27
By Professional Woodworker (san francisco)
I have been a huge fan of Forrest blades, using them almost exclusively, but when I bought a second Woodworker I so I would have something to use while the other one is being sharpenned, I was greatly disappointed with what I received. The center bore was tighter than normal and all the cuts burned. I may be willing to pay twice the price for the quality, but the company better work twice as hard on quality control.



Amazon sent me a replacement, which I haven't tried yet, but I hope this isn't a sign that Forrest has gotten too big for itself. I'll jump ship if this happens again.

 "Great blade" 2007-02-13
By Woodworker (Georgetown Texas)
This is the highest quality blade I have used in 20 plus years of woodwork.

 "The Best" 2006-10-05
By Malgorzata E. Zaluska (New York)
This is quality. The blade works like a hot knife to butter, enhances the cutting power of your machine. Freud nor Amana come close to this. It is pricey; double what a Freud blade would cost. Though you can send this back to the manufacturer for a resharpening at a smaller cost than a new blade.

 "Dick Nelson, Palatka Florida" 2003-04-12
By Richard L. Nelson (Palatka, Fl USA)
I have had this blade for a year and a half..I can say that it is the best of the best. I now will have to have it resharpened, my fault,I did not scan first, cutting some "old salvaged" 2 x 4 and just happened to get into some dry wall screws. Believe it ! it still give an ok cut but I want it better..I would buy another in a second if needed.


Images Product

Buy Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor Now

Read more “Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor”

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Cheap Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud's TicoHi-Density Carbide , a Perma-Shield coating keeps this blade free from gumming and corrosion, Laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life, and tri-metal brazing. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.10" diameter, 60t ATB, 5/8" arbor, 15 Degree hook angle
Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Tri-Metal Brazing for impact-resistant tips
See more technical details

 "Nice Blade" 2009-04-27
By S. Churchill (Midwest, USA)
I'm not a professional woodworker by any means but this blade makes a very nice clean cut on my table saw. I'm going to buy a couple more. Highly recommended.

 "Great item" 2008-09-17
By J. Alkire (Roach, MO USA)
This is a very good saw blade. A little pricey, but it does the job nicely.

 "Diablo Blade" 2008-02-25
By Roger
This is a very nice combination blade that i've put to use on an old Craftsman table saw that's been around since the 50's. Cuts great. Will purchase another when this is no longer able to sharpen.

 "Outstanding" 2007-12-06
By C. L. Messina (Columbus, GA)
The previous reviewer is talking about a promotion that was printed on the packaging for these blades. It was a 'buy one get one free' offer, which is quite a deal. When I bought my blade from Home Depot that was a partial incentive but the other incentive was my familiarity with other woodworkers who had good results with Freud blades. Well, got my blade home and found out after the fact I bought the blade a month too late for the promotion. Yeah, a bummer, but no reason at all to knock the blade. In fact I've been using this blade exclusively for the last year and a half and am continually amazed by its performance. It's cuts quiet and puts a smooth finish on everything. I've used it for rip cutting and cross cutting on every wood I've ever touched including 16/4 maple, mahogany, padauk, cherry, pine, spf, and cedar. In every instance this blade performed spectacularly and still performs well. I've tried a few other blades but always return to this one since it performs well in pretty much every situation I throw at it. The only blade I would consider buying for a performance improvement is a Forest WWII but I'm hard pressed to believe anything will cut much better than this at anywhere near the price. As they say, I'd have to see it to believe it. I paid $60 for this blade and still think it's worth it.

 "I feel like I was cheated" 2005-08-12
By Jim D. White
You get 1 blade and have to send $3 for shipping in order to get the 2nd blade. The offer sounds great, but when I got just 1 blade in mail and seen I had to send $3 to Freud along with orginal recept, plus proof of purchase bar code, I really felt cheated. Why don't they just give two blades at one time if they want to really have a buy one get one sale.I am sure the 1060 blade is a very good blade but I have not tried it.


Images Product

Buy Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Read more “Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating”

Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Cheap Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
Freud Industrial Series Teflon-coated thin kerf saw blade. A must for underpowered saws, thin kerf blades remove less material, which means you'll get reduced waste and less power drain on your saw. Specially designed to produce smooth, clean crosscuts on saws under 3HP. Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.

Specifications:
Freud Model: LU88R010
Diameter: 10"
Teeth: 60 ATB 15 degrees
Arbor: 5/8"
Kerf: 0.090"
Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Thin kerf requires less power and allows for faster feed rate. Ideal for saws under 3 HP.
- Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
- Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
See more technical details

 "good enough to have re-sharpened (now I have two)" 2009-01-26
By Philip G. Aro (San Francisco)
I bought my first Freud Thin Kerf blade eight years ago when we remodeled (our newly purchased Victorian disaster) before we could move in. I used it for both trim work and basic construction on my Makita portable table saw with folding base - these bases/guides are the other thing that makes portable saws worth it. It served for years beyond that for both furniture and home improvement projects. I finally had to get the blade sharpened or replaced - so instead of waiting around for the saw works to finish, I ordered a new one from Amazon. The old blade is now back and ready for use, dipped around the cutting edge in removable protective plastic. I may replace the Makita some day, but the blades are definitely going on the new saw.

 "Great blade for underpowered saw" 2008-10-08
By 2005bravodelta (TN)
I tried this blade upon urging from a cabinet maker. The blade cuts great and has extended the use of my "antique" table saw. I used it on a project with tigerwood which is hard and dense. The blade performed flawlessly. This is a great blade for the weekend project kind of folks.

 "Great Blade!" 2008-06-24
By Kniggit (Oklahoma)
Bought this to replace the Craftsman blade that came with the miter saw and was amazed at the difference. Miter cuts that I used to really have a problem with matching up now are near perfect. Very satisfied with this purchase!

 "I like this blade" 2008-02-27
By D. W. Scudder (Hamilton, Ohio USA)
Never purchased what I could call a top-of-the-line blade for my 2.5HP Craftsman 10" table saw until this one. I crosscut 3/4" red oak and was so impressed with the smooth wood surface. Hardly any bog down, not to mention the low volume of saw dust produced. The thin kerf and teflon coating must be adding to this affect.

This is the best blade I have ever owned, but since this is my first professional blade, I can't give it a 5 star rating, although it could very well be that. Very pleased!

 "Smooth cuts all the way" 2007-09-13
By Bas
This blade produces some exceptionally smooth cuts. I've used it in both my table saw and miter saw, and can't ask for much more. No jagged edges, no saw marks, no tearing. Even with my underpowered, direct drive table saw cuts come out clean.



Is it better than a Forrest Woodworker? No idea, never used one. It is definitely better than the stock blade you get with the saw. I also got the Freud 24T ripping blade. Together, I can get my table saw to actually cut wood.


Images Product

Buy Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Read more “Freud LU88R010 10-Inch 60 Tooth ATB Thin Kerf Crosscutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating”