Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade

Buy Cheap Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade

Buy Low Price From Here Now
Optimized, Symmetric 60 degree Tooth Design. Innovative heat vent expansion slot designs. Fully heat treated. Cuts gutters, vinyl siding & PVC piping .
Readmore

Technical Details

- Optimized, Symmetric 60-Degree Tooth Design
- Innovative Heat Vent Expansion Slot Designs
- Fully Heat Treated
- Cuts Gutters, Vinyl Siding and PVC Piping
- First vinyl siding circular saw blade
See more technical details

 "Vinyl siding blade" 2009-11-12
By William D. Chesnut
This blade works well for cutting vinyl siding.... it was able to cut thru the siding without cracks or shattering. I bought it to help with an addition and all of the cuts were to siding still on the house. I am about to side the new addition and have no doubt that this blade will make the cuts I need to complete this siding job... how well it works in colder weather is questionable but I think any cut in cold weather can be tricky.


Images Product

Buy Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade Now

Read more “Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade”

Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp

Buy Cheap Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp

Buy Low Price From Here Now
Laser cutting guide ensures precision miter cutting up to 45deg . Adjustable pivot fence allows cutting larger stock. Features 2 HP motor, trigger safety button and transparent blade guide. Includes extension wings, hold-down clamp, arbor wrench, dust bag and spare motor brushes. Blade Diameter (in.): 10, Amps: 10.8, Bevel: Single, HP: 2, Max. Degree Miter Cuts - Left: 45, Fence: Adjustable pivoting, Laser Guide: Yes, Wrench Included: Yes, Dust Bag Included: Yes
Readmore

Technical Details

- FREE SHIPPING!
See more technical details

 "Worth Every Penny and then some." 2008-06-02
By cmr (ATL)
Great saw, specially for that price. Barely over $100. Does everything I need for light work around the house.

 "Good service" 2008-01-15
By Hongbing Zou (nj)
I bought this to cut wood for my deck. The quality is not so good, a part was broken in a few cuts. I called the customer service, a new part was sent to me very quickly. When I called again to express that it's hard to replace the part myself, a RN it given to me, and a new saw was sent to me in a few days. The saw has all the good functionalies I needs for all the cuts, at the price, it's a great deal.

 "occasional need" 2007-09-27
By Robert Butler (Riverside county CA)
I am very satisfied with this piece of equipment. The star rating is a reflection of the fact that I know the broader range of what is available. I do finish work around the house and occasionally else where. It does the job I need with baseboard, casing, various other moulding, etc. If one was going to use this type of saw regularly, more amps would be important.

 "great value" 2007-09-26
By Lyn L. Solinas
This saw was delivered in excellent condition, works as expected and is a great value for the price. I never thought I could purchase a sliding compound miter saw with laser for under $100.

 "All in one item" 2007-05-23
By Jesus M. Barbosa Arabda
This machine is great... but I did receive one part broken... the back safety lock. Could you please help me?






Images Product

Buy Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp Now

Read more “Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp”

- Northern Industrial Wet Tile Saw - 7in. Blade Size

Buy Cheap - Northern Industrial Wet Tile Saw - 7in. Blade Size

Buy Low Price From Here Now
This Northern Industrial 7in. wet tile saw delivers ample power to cut a variety of wall and floor tile sizes. Can also cut granite tiles. All-metal saw is very sturdy. A great value for residential tile work. Rated Watts: 500, Engine Speed (RPM): 3,400, Arbor Size (in.): 5/8, Blade Diameter (in.): 7, Cutting Thickness (in.): 1 3/8
Readmore

Technical Details

- FREE SHIPPING!
- Height: 6.8in.
- Not for masonry
- 120 Volt, 60 Hz motor
- 1.4in. max. depth of cut @ 90deg , 1in. @ 45deg
See more technical details

 "fantastic purchase" 2009-09-16
By Jean Viverito (davie, florida)
my husband and I bought this to cut a few tiles- it was way better than renting a tile cutter - we could cut them at our leisure and didn't have to worry bout returning it - works geat - wouldn't want to do a houseful of tiles, but it will always come in handy - works great.

 "Still trying to get this to work" 2009-09-06
By Barbara Mckee (Austin, TX USA)
I bought this saw about a month ago. Like one other poster, mine arrived looking like it had been kicked around quite a bit -- the box was bashed in, the unit was bent in a few places and I couldn't really tell if anything was missing because there is no packing list.

Today I tried to set it up and use it. The very few assembly instructions refer to diagrams that are not part of the Owners Manual. I even went and found the online version and still no diagrams. I THINK I got the few things done that were were required in the Assembly Instructions. However when I turn on the saw to use it all I get is a buzz -- the blade doesn't move. I don't know if something jarred loose during shipping or whether I have missed an Assembly step. So I'm off to try Northern Tools customer service.

 "Very useful tool" 2009-08-10
By Tom (NY)
The saw is well-built... mostly metal, very little plastic. It cuts through ceramic tile like a hot knife through butter. Yes, it will get you wet, but it's a small price to pay to get the job done. It makes miter cuts of any angle with an adjustable rotating table top.

The only negative is the fence. Actually, the fence itself is ok, but the knobs that loosen and tighten it hurt your fingers, so you're better off drawing a line on the tile and freehanding the cuts.

I haven't had the tool long enough to find out whether or not it holds up to being intermittently wet. I'm hoping that the screws, etc, are all stainless steel, but only time will tell.

 "Wet tile saw" 2008-09-18
By Russell A. Frost
I found the northern Industrial 7" tile saw to do the cutting of ceramic tile for my kitchen countertop very satisfactory. I would recommend it if cost is the primary consideration

 "Wet Saw - Serves the purpose.." 2008-08-20
By J. Herbert (New Castle, IN USA)
I bought this to trim down some tiles for a firepit I had that had broken tiles. Worked great. The guide would be my only complaint. It is just a little flimsy and hard to get a good/precise setting. But all in all this is a decent saw.


Images Product

Buy - Northern Industrial Wet Tile Saw - 7in. Blade Size Now

Read more “- Northern Industrial Wet Tile Saw - 7in. Blade Size”

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

Buy Cheap DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

Buy Low Price From Here Now
The DEWALT DW4701 is a great addition to your 4-to-4-1/2-inch grinders. With an advanced diamond matrix, this blade provides a longer life and improved grinder application. It’s designed for consistency, with a straight and dependable depth of cut and a greater life span by 100 times more than the industry standard. Use this blade on a variety of tough applications, including concrete, stone, granite, brick, and tile. It measures 4-1/2-inches in diameter with a 5/8-inch and 7/8-imch arbor. This grinder accessory must be used with the DW4705 4-inch or 4-1/2-inch guard with show and the DW4717 4-inch flange or DW4706 4-1/2-inch flange.
Readmore

Technical Details

See more technical details

 "Turbo Cutter is worth the money" 2009-08-01
By Wayne H. Law (Napa, CA)
I have used lots of grinding wheel but this is the most universal one to date. I cut off lag bolts from the floor easily. I have trimmed up some concrete and no problems. The most interesting thing is that the blade itself remains cool to the touch. I was amazed by that. Even though the bolts you cut off are red hot the blade is still cool. Nice to have such versatility in one blade.

 "Every contractor and DIYer needs this in your tool box" 2009-07-27
By Kevin Salerno
There are dozens of ways to cut materials with varying degrees of success. If you already use the standard ones, especially a sawzall with a full set of blades you might feel you have your bases covered. But this Diamond cutting rim attached to a small angle grinder like the DEWALT D28402K makes life so much easier. I purchased one for a bathroom renovation and steam room project and needed something that would cut everything from cement board to concrete to wire mesh. This blade exceeded all my expectations. The cuts are straight and true and it eats through everything like a hot knife through butter. I found myself reaching for it to make quick cuts in sometimes cramped places and in seconds the job was done. It did some cuts that would have been impossible using anything else. If you're a DIYer you might not have considered owning a small angle grinder or a diamond saw blade in the past. But once you've used one like this Dewalt, you'll be very happy you added it to your tool arsenal.

 "dewalt DW4701" 2008-01-19
By Mr. G
good quality blade. heat disapation good and no "warping" with continuous use. I got a Bosch grinder.

 "Dewalt Diamond Blade" 2007-12-03
By M. Biscotti Jr. (Sykesville, MD USA)
I thought the blade worked great. I did find out after I had purchased the blade and angle grinder that they (Dewalt) recommend a 2-sided shield to attach to their grinder when using a cutting blade. I needed it for making curved cuts in 1/2" porcelain tile and I was waiting on the item to complete the job so I put on goggles, mask and ear protection and went for it. You will definitely need to wear a mask and goggles and blow out your grinder periodically with compressed air as it creates a lot of fine dust. The blade cut through the tile beautifully - I made a few passes so the blade would not have to work so hard. I had tried cutting the tile with other diamond-tipped jigsaw and rotary tool blades and nothing compares to the efficiency of this blade and the grinder.

 "Cuts like butter!" 2007-07-21
By Neil Surguy (Corpus Christi, TX)
This blade is worth every penny. Cut through my asbestos & concrete siding like butter. Vastly superior to the cheapo blades. Highly recommended.


Images Product

Buy DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor Now

Read more “DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor”