Makita 792541-7 Reciprocating Blade

Buy Cheap Makita 792541-7 Reciprocating Blade

Buy Low Price From Here Now
For use with Model No. 4390D and 4390DW cordless reciprocating saw. 5 blades per card. No. 792540 9: 24TPI, for mild steel, plywood, masonite, plastics and formica; overall length: 3 15 16" No. 792615 4: 24TPI, for mild steel, plywood, masonite, plastics
Readmore

Technical Details

- Ideal for wood cutting
- Thin kerf design gives more cuts per battery char
- 9 teeth per inch
- Overall length 4-3/4"
- For use with model 4390D (2581-3049)
See more technical details

 "Makita Recipro saw blade #78" 2009-10-24
By P. Johnson (Pengilly, MN USA)
This is a wood blade. Shipped from Grady's Ace Hardware, the lowest price for a 5 blade package listed on AMZ. With S&H ran about $2.42 per blade. Arrived a few days after posting order on AMZ.


Images Product

Buy Makita 792541-7 Reciprocating Blade Now

Read more “Makita 792541-7 Reciprocating Blade”

Freud D0620X Diablo 6-Inch 20 Tooth ATB Trim Saw Blade with 1/2-Inch Arbor

Buy Cheap Freud D0620X Diablo 6-Inch 20 Tooth ATB Trim Saw Blade with 1/2-Inch Arbor

Buy Low Price From Here Now
Thin kerf saw blade for cordless saws. Alternate top bevel, .039" plate, .049" kerf, 18 degree hook angle, 2,000 max RPM.
Readmore

Technical Details

- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

 "The best I have used" 2009-08-21
By Builtmany (Scotch Plains, NJ United States)
On my Porter Cable Saw Boss 6" blades are hard to come by and not many choices. After trying most of the others if not all I can say this is the best I have used. Cuts nice, accurate and lasts a long time. I will be buying more for stock in my tool box.

 "great cutter" 2008-07-13
By sy (ohio)
This blade cuts great with my porter cable 19 volt cordless saw.

I think its probably the best blade I've used with it

 "Good blade" 2008-06-11
By Robert Cotton (Orlando FL)
My saw is a Porter Cable Saw Boss. It's a great saw, but the 6-inch blades are hard to find. It's good that Freud sees fit to make them. The cutting ability of my saw was improved with the new blade, even though the blade on the saw already was still very sharp. I like Freud blades, and use them on my table saw, too.


Images Product

Buy Freud D0620X Diablo 6-Inch 20 Tooth ATB Trim Saw Blade with 1/2-Inch Arbor Now

Read more “Freud D0620X Diablo 6-Inch 20 Tooth ATB Trim Saw Blade with 1/2-Inch Arbor”

Fein 6-35-02-126-03-0 E-CUT Blade -1 3/8-FMM 250 3-Pack

Buy Cheap Fein 6-35-02-126-03-0 E-CUT Blade -1 3/8-FMM 250 3-Pack

Buy Low Price From Here Now
MultiMaster e cut blade has flush cut design allows for flush cuts to floors in tight areas. Ideal for doorjambs, baseboards, toe kicks, and flooring work. No. 6 35 02 126 01 3: 1 3 8" wide, 1 per pack No. 6 35 126 03 0: 1 3 8" wide, 3 per pack No. 6 35 0
Readmore

Technical Details

- e-cut blade
- precision cut
- 3 pack
- narrow
- For Cutting Wood
See more technical details

 "same blade available for fraction of this price at amazon!" 2008-08-19
By Juan Doshuevos (California)
look elsewhere for the same blade, you can get a 3 pack of em for far less than 90 odd dollars these vampires are charging for one.!!!

why does amazon allow this to happen? caveat emptor! (that means 'buyer beware' )


Images Product

Buy Fein 6-35-02-126-03-0 E-CUT Blade -1 3/8-FMM 250 3-Pack Now

Read more “Fein 6-35-02-126-03-0 E-CUT Blade -1 3/8-FMM 250 3-Pack”

MK Morse ZCDB06 59 1/2-Inch x 1/4-Inch x .014 6TPI Wood Working Bandsaw Blade

Buy Cheap MK Morse ZCDB06 59 1/2-Inch x 1/4-Inch x .014 6TPI Wood Working Bandsaw Blade

Buy Low Price From Here Now

Readmore

Technical Details

- Suitable for use on Wood and easy-to-machine metals
- Fits Standard Stationary Machines
- One Blade per Package and 5 Packages per Box
- Manufactured in Canton, Ohio USA!
- Carbon Hard Edge Flexible Back
See more technical details

 "Morse bandsaw blade ZCDB06" 2008-02-17
By syld (Naples, FL)
I have to agree with the previous reviews that I read - which indicated that this blade was far superior to the Delta blade that came with the bandsaw


Images Product

Buy MK Morse ZCDB06 59 1/2-Inch x 1/4-Inch x .014 6TPI Wood Working Bandsaw Blade Now

Read more “MK Morse ZCDB06 59 1/2-Inch x 1/4-Inch x .014 6TPI Wood Working Bandsaw Blade”

Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger

Buy Cheap Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger

Buy Low Price From Here Now
When making a high precision cut, any amount of rim vibration can mean the difference between a masterpiece and a scrap.sets of saw blade stabilizers are precision machined and balanced to give an added amount of stability.Stabilizer sets not only improve the cut, but make the saw cut quieter and extend it's cutting life between sharpenings.Stabilizer sets can be used on blades 7" diameter and larger.should only be used on stationary saws and should never be used on hand held portable saws. Application: For Maximum Saw Blade Performance On Stationary Saws
Readmore

Technical Details

- An ideal stabilizer for use with saw blades 7-inches in diameter and larger
- Precision-machined and balanced for greater stability and less vibration
- Improves cutting performance
- 5/8-inch arbor
- Limited lifetime warranty
See more technical details

 "A small item with a lot of controversy" 2009-03-31
By Carlgo (Carmel Valley, CA)
All the saw blade companies offer stabilizers. Some users swear by them, others think it is just a profitable little extra to sell.



We all know they cut down on the depth of cut. Another thing to consider is that on some brands of saws you may have to remove spacers to accommodate the extra thickness and this effects other attachments on the saw as well. Switching back and forth from using the stabilizer is not always that easy.



My own tests, done on both a table saw and an old radial arm saw, are inconclusive. It made no difference on my one expensive 1/8" wide blade, but did cut down the noise on one of my cheaper, real noisy thin blades. On better quality thin blades the difference was less noticeable.



Are the cuts actually better? Hard to tell. Normal variations in the feed rate and accuracy in the feed seem to make more difference. The goal of a perfect cut is always somewhat elusive anyway unless you set up each cut like you are making a part for NASA.



On the other hand, some people do have the time and patience (and equipment) to make those machine-shop cuts and why not use a stabilizer as well? It can't hurt, and the noise reduction alone might be compelling for some people.



I have used mine on a few occasions, when cutting my rare piece of really special wood. It works fine and makes me feel better. Makes the sound of sawing more...sort of expensive-like. That's worth it sometimes. It just isn't absolutely necessary.

 "saw blade stabilizer" 2008-04-18
By Michael R. Schupp (Kansas City, Kansas United States)
Following some of the other review suggestions, I bought the set and installed one plate on my table saw and one on my radial arm saw. Between adding a link belt and the stabilizer to my table saw, I now have virtually no vibration in the table saw. With the radial arm saw being direct drive there was less noticeable difference for vibration, but the saw cut is beautiful. I especially like the 3.5" size of these plates in that they take away very little cutting depth from my 10" saws. I would recommend them as a simple and inexpensive way to upgrade the quality of your saws.

 "Not worth it" 2008-03-26
By Jesse L. Bucholtz (Melbourne, FL)
I agree with the review that you should stabilize your saw and not your blade, but at some point you are going to want a blade stabilizer. If you do a lot of crosscuts/miters on your table saw it really helps out to give you that "shinny" crosscut. This stabilizer is the worst that could ever have been invented. Who wants to have their blade offset approx 1/4"? There are two stabilizers in the kit and I have yet to see a table saw that you can remove the original flange mounted to the arbor so you don't warp your blade with only one stabilizer. (The stabilizer is larger than most arbor flanges) Freud really should have thought out this design. They make wonderful blades, but this product makes them look like idiots. You have to adjust your fence to compensate. Homemade box cutting jigs are shot. The only nice thing is that they are not as large as other blade stabilizers. I threw this one in the trash and bought the forest 5" blade stabilizer. Does everything I want. I can use it with my dado. Which is a Freud. DO NOT USE ONLY ONE OF THESE. That can cause serious injury or death.

 "Good product, but know the implications!" 2007-12-17
By Steven Stromer (Brooklyn, NY United States)
The Freud SC-001 3-1/2-Inch Blade Stabilizer is a well manufactured, simple product. It certainly improves blade stability. The blade feels firmer once installed. However, adding these to your table saw will likely require a large amount of effort that isn't well mentioned in previous reviews, unless I missed it.



One reviewer recommends adding only a single stabilizer on the outside of the blade. I tried this, out of curiosity, and quickly discovered that this warps the blade by a significant amount, since the built-in stabilizer on the other side of the blade is likely going to be smaller in diameter (If not, I don't see how these stabilizers would serve much purpose, anyway!).



When I began to install the expected two stabilizer configuration, I had an 'uh-duh' moment, in which I realized that installation of the inside stabilizer shifts the center-point of the blade! Seemed pretty obvious a little later than I'd have hoped! This means that you will have to reposition your splitter, as well as replace any zero-clearance inserts you use, and in my case, may not be able to use your stock insert. In my case (a Jet JWTS-10), I had to shim all of the mount points for the splitter with matching washers, as the adjustment slots at these points were not wide enough to compensate for the stabilizer. Adding the washers and lining the splitter up with the newly positioned blade was an intricate affair.



There is also a small element of danger added when using these stabilizers, in that when bringing the blade up while spinning, which is called for, once in a while, the stabilizers can lift the insert, which would, of course, send it flying like a missile. Similarly, make certain that the added height obtained by the higher stabilizer when angling the blade does not bring it in contact with the insert; in some instances, the blade may have to be lowered when angling it, so that this will not occur. I believe there are adjustable stops inside the saw cabinet that can limit movement. At my next free chance, I will be looking to make such an adjustment to limit the risk, at least for the upper limit on the blade height.



I haven't yet determined whether the stabilizers affect the runout of the blade. I will look into this soon. Now that I've committed to using the stabilizers, I think this would be the only negative side effect that would prompt me to remove them. All the same, I'm not sure I would have started on this path if I could start again!

 "Freud Blade Stabilizer" 2007-07-15
By Alexander Martinov
Useless and overpriced gudget. Blade can't be placed on calibrated 5/8" shaft and sits over the thread. As a result balance is off and you can't turn on a saw without the risk of blowing your brains out.


Images Product

Buy Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger Now

Read more “Freud SC-001 3-1/2-Inch Blade Stabilizer with 5/8-Inch Arbor for 7-Inch Saws or Larger”

Milwaukee 49-22-1178 T-Shank Metal/Wood Cutting Jig Saw Blade Assortment, 5-Pack

Buy Cheap Milwaukee 49-22-1178 T-Shank Metal/Wood Cutting Jig Saw Blade Assortment, 5-Pack

Buy Low Price From Here Now
5 Pack, T-Shank Jig Saw Blades, Assorted, For Metal & Wood Cutting, General Purpose.
Readmore

Technical Details

- 5 Pack Assortment
- 9/32 in. Width, T-Shank
- Metal Cutting Blades: 48-42-5121, 48-42-5161, 48-42-5190
- General Purpose Blades: 48-42-5300, 48-42-5310
See more technical details

 "Milwaukee T-Shank Metal / Wood Jig Saw Blade Assortment" 2009-06-18
By Michael D. Patterson
I have never used T-Shank blades before. These are extremely easy to install and do an excellent job cutting.

 "GREAT PRODUCT" 2008-10-19
By E. Moreno Jr. (Millbrae, CA United States)
Great jig saw blades.



Can't go wrong with Milwaukee.



Nuff said.



In Christ: Raymond


Images Product

Buy Milwaukee 49-22-1178 T-Shank Metal/Wood Cutting Jig Saw Blade Assortment, 5-Pack Now

Read more “Milwaukee 49-22-1178 T-Shank Metal/Wood Cutting Jig Saw Blade Assortment, 5-Pack”

Corona Clipper 14-inch Curved Blade Razor Tooth Saw #RS 7395

Buy Cheap Corona Clipper 14-inch Curved Blade Razor Tooth Saw #RS 7395

Buy Low Price From Here Now
14", Pruning Razor Tooth Saw, For Large Branches, 3 Sided Razor Teeth For Efficient Cutting, Impulse Hardened Teeth For Long Service Life, Replaceable 14" Taper Ground Blade, Curved Blade Design For Faster Cutting, Ergonomically Designed Co-Molded Handle.
Readmore

Technical Details

- Lifetime Warranty
See more technical details

 "Great saw!!!!" 2009-10-06
By L. M. Herron (Georgia)
I've used these saws for years - I do a lot of pruning. This is the 10th RS7395 saw that I've used - until they got too dull to cut. Too bad that there's not a cheap way of sharpening them.


Images Product

Buy Corona Clipper 14-inch Curved Blade Razor Tooth Saw #RS 7395 Now

Read more “Corona Clipper 14-inch Curved Blade Razor Tooth Saw #RS 7395”

Bosch T119BO 3-Inch 12-Tooth Jig Saw Blades (5-Pack)

Buy Cheap Bosch T119BO 3-Inch 12-Tooth Jig Saw Blades (5-Pack)

Buy Low Price From Here Now
High carbon steel. Side set and ground, used for narrow curve cutting. Used to cut hard and soft wood, plywood, particleboard and plastics, 5/64" to 3/4".
Readmore

Technical Details

- 5 Per pack
- 3-Inch length
- 12-Tooth
- Application-wood
- Scroll cut
See more technical details

 "Just Did It" 2000-09-05
By Grant Mann (Crestone, Co United States)
I just bought a second Bosh jig saw not ony because of their endurance and smooth running capacity but also they are the only saws that run these Bosh blades. In the building business for 20 years and never found a better cutting jig saw blade.


Images Product

Buy Bosch T119BO 3-Inch 12-Tooth Jig Saw Blades (5-Pack) Now

Read more “Bosch T119BO 3-Inch 12-Tooth Jig Saw Blades (5-Pack)”

Hitachi 726102 12-Inch 90 Tooth TCG Non-Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Buy Cheap Hitachi 726102 12-Inch 90 Tooth TCG Non-Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now
Kerf: .110". Plate: .087". Carbide Grade: C3 micrograin. Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw. Lubricants are recommended when used for this application. Good for woodworking and cutting plastics. Tungsten carbide triple-chip grind produces clean cuts.
Readmore

Technical Details

- Circular saw blade ideal for cutting wood and plastics
- Triple chip design perfect for use on brass, aluminum, copper, and other light metals
- 90 long-lasting tungsten carbide teeth
- 1-inch arbor fits most 12-inch miter saws
- 12-inch diameter; 5-year limited warranty
See more technical details

 "Monster of a Blade" 2008-08-02
By J. Humbert
Put this blade on a good miter saw and you can shave the hair off a tic's back and not cut them. No sharp edges when you cut with this joy and the price was great!


Images Product

Buy Hitachi 726102 12-Inch 90 Tooth TCG Non-Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Now

Read more “Hitachi 726102 12-Inch 90 Tooth TCG Non-Ferrous Metal Cutting Saw Blade with 1-Inch Arbor”

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Cheap Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud's TicoHi-Density Carbide , a Perma-Shield coating keeps this blade free from gumming and corrosion, Laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life, and tri-metal brazing. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.10" diameter, 60t ATB, 5/8" arbor, 15 Degree hook angle
Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Tri-Metal Brazing for impact-resistant tips
See more technical details

 "Nice Blade" 2009-04-27
By S. Churchill (Midwest, USA)
I'm not a professional woodworker by any means but this blade makes a very nice clean cut on my table saw. I'm going to buy a couple more. Highly recommended.

 "Great item" 2008-09-17
By J. Alkire (Roach, MO USA)
This is a very good saw blade. A little pricey, but it does the job nicely.

 "Diablo Blade" 2008-02-25
By Roger
This is a very nice combination blade that i've put to use on an old Craftsman table saw that's been around since the 50's. Cuts great. Will purchase another when this is no longer able to sharpen.

 "Outstanding" 2007-12-06
By C. L. Messina (Columbus, GA)
The previous reviewer is talking about a promotion that was printed on the packaging for these blades. It was a 'buy one get one free' offer, which is quite a deal. When I bought my blade from Home Depot that was a partial incentive but the other incentive was my familiarity with other woodworkers who had good results with Freud blades. Well, got my blade home and found out after the fact I bought the blade a month too late for the promotion. Yeah, a bummer, but no reason at all to knock the blade. In fact I've been using this blade exclusively for the last year and a half and am continually amazed by its performance. It's cuts quiet and puts a smooth finish on everything. I've used it for rip cutting and cross cutting on every wood I've ever touched including 16/4 maple, mahogany, padauk, cherry, pine, spf, and cedar. In every instance this blade performed spectacularly and still performs well. I've tried a few other blades but always return to this one since it performs well in pretty much every situation I throw at it. The only blade I would consider buying for a performance improvement is a Forest WWII but I'm hard pressed to believe anything will cut much better than this at anywhere near the price. As they say, I'd have to see it to believe it. I paid $60 for this blade and still think it's worth it.

 "I feel like I was cheated" 2005-08-12
By Jim D. White
You get 1 blade and have to send $3 for shipping in order to get the 2nd blade. The offer sounds great, but when I got just 1 blade in mail and seen I had to send $3 to Freud along with orginal recept, plus proof of purchase bar code, I really felt cheated. Why don't they just give two blades at one time if they want to really have a buy one get one sale.I am sure the 1060 blade is a very good blade but I have not tried it.


Images Product

Buy Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Read more “Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating”

Dremel MM422B Multi-Max Wood and Metal Flush Cut Blade, 3-Pack

Buy Cheap Dremel MM422B Multi-Max Wood and Metal Flush Cut Blade, 3-Pack

Buy Low Price From Here Now
Dremel multi max accessories also fit the Fein multi-master and the Bosch multi-X The Dremel multi-max can tackle numerous tasks such as sanding wood, removing caulk, removing tile grout, cutting drywall, scraping stuck vinyl flooring, making flush cuts in wood trim, cutting copper pipe and removing window glaze, to name a few. Quick fit accessory change system - provides accessory changes twice as fast as similar oscillating tool systems Flush cut blades are used to make precise cuts to allow for installation of flooring or wall trim. May be used on non-ferrous metals, wood, plastic, drywall and other soft materials. Applications include flush cutting doorjamb or windowsill, for flooring or tile installation. Sawing off water pipes (copper).
Readmore

Technical Details

- Dremel multi max accessories also fit the Fein multi-master and the Bosch multi-X
- The Dremel multi-max can tackle numerous tasks such as sanding wood, removing caulk, removing tile grout, cutting drywall, scraping stuck vinyl flooring, making flush cuts in wood trim, cutting copper pipe and removing window glaze, to name a few.
- Quick fit accessory change system - provides accessory changes twice as fast as similar oscillating tool systems
- Flush cut blades are used to make precise cuts to allow for installation of flooring or wall trim. May be used on non-ferrous metals, wood, plastic, drywall and other soft materials.
- Applications include flush cutting doorjamb or windowsill, for flooring or tile installation. Sawing off water pipes (copper).
See more technical details

 "Wood and Brass Blade" 2009-08-02
By G. Ellis (Maryland)
A good product, but in the fine print is the warning that this blade is only for NON-FERROUS metal (i.e., no iron, no steel, and definitely no stainless). This blade should more properly be called Wood and Brass Flush Cut Blade. Again, if brass is your object, this is a good blade. If you hope to cut nails, fuhgeddaboudit!


Images Product

Buy Dremel MM422B Multi-Max Wood and Metal Flush Cut Blade, 3-Pack Now

Read more “Dremel MM422B Multi-Max Wood and Metal Flush Cut Blade, 3-Pack”

Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece

Buy Cheap Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece

Buy Low Price From Here Now
* Semicircle saw blade * Grout remover * Carbide grit * 2-1/2"
Readmore

Technical Details

- 2-1/2-Inch, Standard
See more technical details

 "Cuts Great" 2009-07-13
By GalvezGuy (Galveston, TX, USA)
I am using this blade to cut out Hardie Plank siding around windows,vents, and fixtures. It cuts fast and clean with a minimal abount of dust. I am not sure if I would use this on grout like others have, the blade is too thin for that application.

 "Expensive replacement blades" 2009-06-19
By Hb Builders Inc. (Telluride, Co)
I used this blade to remove sanded grout ( 1/2" W X 1/2" Depth) and about 30' in length. It worked pretty damn good... The blade just wore out too fast, so I bought a couple more. It would be nice if the replacement blades were a little cheaper though. I might purchase the diamond coated blades next time, even though they are about $20 more a piece they should last longer. Plus the Rockwell tool is nice and not as loud as the FEIN for about twice as much...

 "Carbide Grit Segment saw blade, standard - not good! " 2009-03-28
By CardiffArms (MA, USA)
I bought the Sonicrafter kit "Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit", and the Carbide Grit Segment saw blade was included as one of the attachments. Unfortunately the thing is made from what can only be described as "a thin bit of tin", and as soon as it touched the first thing I tried to cut, the 'teeth' that connect it to the Sonicrafter shaft rounded off! I thought maybe I hadn't tightened the screw enough so offset it by one tooth and tried again. Basically the metal is so thin that it's not physically possible to really tighten the screw enough to hold this in place, so it rounded the teeth again. So it's for the trash, and I haven't even used it once!



Having said all that, I have successfully used other attachments (which are made of thicker material) to cut through drywall and wood. One of the jobs I bought this for was grout removal, but haven't tried that yet.



I haven't had the problem of the attachments coming loose, but I can imagine that over time that might start to become a problem. A quick release mechanism would have been better, especially if you have a variety of tasks to do in short order, but for now I'm trying to minimize the blade changes in order to avoid wearing out the screw.

 "Coolest tool ever!" 2009-03-10
By Mischel Turner (Aurora, CO)
This is truly the handiest tool ever. Use it for almost every repair and craft you can think of! The carbide blade works perfectly for removing grout from tiles.


Images Product

Buy Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece Now

Read more “Rockwell RW9124 Sonicrafter 2-1/2-Inch Carbide Grit Segment saw blade, Standard, 1-Piece”