Buy Low Price From Here Now
The Freud Difference
Freud manufactures some of the most innovative, technologically advanced woodworking tools and accessories in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.
About Freud Saw Blades
A world leader in cutting tool technology, Freud has earned a reputation for quality woodworking tools and accessories. With several unique design features, Freud saw blades are among the longest lasting and best performing blades in the industry. Choose from a variety of blade designs, sizes and coatings to select the best blade to suit your project.
About this Finishing Saw Blade
This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser-cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-Shield coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade leaves a smooth finish when ripping and crosscutting 1x stock, decking, fencing, and plywood.
Warranty
This blade is covered by Freud's limited lifetime warranty.
Readmore
Technical Details
- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Non-stick Perma-Shield Coating reduces gumming, rusting, and corrosion - ideal for decks
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Laser-cut blade plate for true cuts
See more technical details
By G. Conner (USA)
After reading several other reviews I thought this information would be helpful.
Some users report short-life from this blade. That may be true under certain circumstances, but it usually isn't the blade's fault. Here's how you can get cleaner, safer, smoother cuts and MUCH more life from this or any other good blade.
1- Keep it clean. "pitch" --- that gummy residue from wood--- increases friction and heat. There are several products marketed specifically for keeping blades clean. They work fine, but I have found that no product works better than rubbing alcohol. Rubbing alcohol is inexpensive and widely available at any pharmacy. I will assume anyone reading this is careful enough to UNPLUG THE SAW before cleaning the blade or making any other adjustment.
2- Material considerations... Cutting plywood is tough on any blade because plywood has multiple layers of glue. Glue heats up and gets sticky FAST. Long rips and multiple rips make the blade hot anyway, and a hot blade melts glue faster than a cool blade. So just be aware, ANY BLADE from any manufacturer will wear faster in plywood.
3- Lubrication... You can minimize friction with a light coat of paste-wax or paraffin. You don't need to be perfectly even in the application of either. A quick dab of wax or a few strokes with the paraffin stick will quickly spread itself in about one-second into the first cut. Lube both sides of the blade roughly equally to reduce warping, and don't forget to lube the teeth. Once you make the first cut, the wax or paraffin will spread evenly everywhere and the excess will disappear.
Again... please UNPLUG THE SAW when you lubricate the blade. I have seen some pros turn their saws upside down and hold a paraffin stick against the running blade. It makes me cringe to think what might happen. The fact is all pros know the value of lubricating cutting tools, but most of us are not in that big of a hurry. Take your time and unplug the saw. A trip to the emergency room costs time, money and pain.
4- Cut Straight! Wandering cuts cause excess friction, heat and wear. Free-hand cutting is a skill that requires concentration and practice to achieve good technique. Using a straight-edge saw-guide is easier and works for novices and pros alike. Whenever I hear someone complain about their saw-blades getting dull too fast, I look at how they use the saw. The problem is most-often the user, not the blade. You do NOT need an expensive saw-guide, although many of them work well. A cheap straight edge can be quickly made ( in about ten minutes ) from ANY board with a straight factory-cut edge and a piece of scrap plywood.
This blade ( and other blades like it from Freud) have a slippery coating designed to reduce wear, but I have found that even these good blades work better and last longer with frequent lubrication.
I have used this blade and other Freud edge-tool products for decades and never experienced premature wear. Their products are consistent and very well-made. Considering the low price, I consider them to be a great value too. This 40-tooth model makes smooth cuts, especially when you use the tips presented here.
IF you want joinery-quality cuts from this blade, you can get them. You just need to install an abrasive sheet ( sandpaper ) to the sides. You can buy the commercially made round sheets for this, (they ARE convenient!) or make your own. I cut mine from cheap 180 grit aluminum-oxide sheets, using a compass and an X-acto knife, then attach them with 3M super 77 spray adhesive. This is about one-tenth the cost of commercial products like "Final-Cut."
For clean-straight cuts, you must be certain that your saw-blade is parallel to the cutting-guide and that it is at a perfect 90 degrees to the work. DeWalt, and Bosch saws have adjustments for that. Most saws do not. Even if you have a cheap saw, you can make the blade run parallel to the cutting-guide by shimming the edges with UHMW tape. Setting the blade perpendicular to the work can be adjusted similarly by shimming the base-plate. You can do both adjustments roughly with a decent square, or you can get them "dead" perfect with a dial indicator. I get the best results with a dial indicator and the TS aligner. <<< (HIGHLY RECOMMENDED!)
Please do not take my comments as negative towards the other reviewers who have expressed their problems with this blade. They are not necessarily "wrong." Nor am I trying to seem like a "know-it-all." Many professionals use these tricks and tips. I simply want to help.
I know from long experience that this is a good blade at a reasonable price. The carbide is of high-quality and the manufacturing method insures consistent sharp edges.
If any saw works well for the first few cuts, it should continue to cut well unless the person using the saw ignores some basic rules of physics and technique. If someone experiences premature wear, it could be caused by the material, the method or the imperfect adjustment of their saw. Consider these facts when choosing and using your blades.
Try this blade and the cheap tips I suggested. You should get good results. Even if you don't, you won't lose much money or time. I won't ask that anyone simply believe me... just try it. See for yourself.
By Cactus AZ
I bought this for cutting laminate flooring. It worked. No chipped edges, nice clean cut. Resulted in less waste and fewer cuts.
By P. Buchan (Midwest USA)
Does exactly what is says. It is a great finishing saw blade. It does have a short life, but no shorter than any finishing blade would have. I have used it on several projects and it holding up as expected. I would highly recommend this blade.
By Dave Campbell (Hudson Valley)
While you can't beat these Diablo blades for cross cuts and short rips, if you plan on any long or repetitive ripping, LOOK ELSEWHERE. Specifically, as with all thin kerf blades I've tried, there is no escaping the warp and wander once it heats up. The only solution for long ripping duty is a heavy, WIDE blade. I've tried half a dozen brands, and regardless of the cute little heat dissapation cuts and grooves built in, they all fail the warp test. However, for the short haul, particularly circular saw use, vs. the table saw, it's a good cutting blade.
By James E. Thomson (waterford, New York)
I just purchased this through amazon.com as part of buying a Milwaukee Cicular saw. The blade is quiet and cuts with such precision, I was able to shave 1/32 off of OSB! The design is unique with laser cut lines and shapes which apparently reduce vibration. I plan on buying more Freud blades. I like the thin kerf! Jim Thomson, Waterford, NY
Images Product
Buy Freud D0740X Diablo 7-1/4 40 Tooth ATB Finishing Saw Blade with 5/8-Inch Arbor, Diamond Knockout, and PermaShield Coating Now
0 comments:
Post a Comment