Buy Low Price From Here Now
High Speed Steel (HSS) blade for fiberglass, carbon fiber, 20 gauge sheet metal, and harder woods. Segment to cut right angles without overcutting. This blade is flat.
Readmore
Technical Details
- High-speed steel blade with segmentation on one side- Rigid material provides for more durable blade and better cutting ability
- Segmentation allows for cutting into corners and right angles; designed for straight cutting in harder material
- Cuts sheet metal up to 1mm and harder wood, fiberglass and carbon fiber
- Weighs 8 ounces shipped
See more technical details
By Sudoku Junky (Los Altos, CA USA)
I love using this tool but for 3 things:
Brittle blade - my first one shattered when the tool it was mounted to hit the concrete floor.
Breath taking accessory prices.
The blade lock lever is too stiff for my small hands - it will snap shut breaking fingernails.
By Sube (SoCal)
Great product, if a bit expensive, amazingly versatile for cutting precise notches into corners, holes in cement backer board and clean, straight lines through dry wall, and just about any metal or wood projects you can imagine. These blades hold their saw teeth edge very well. Since they are not a common, off-the-shelf item, it's a good idea to keep a spare available. Fein 63502113019 3-5/16-Inch Flush Cut Wood Blade
By Larry A. Jones
I found these blades to be somewhat fragile also. I accidently vibrated the center "teeth" out of the blade. I just clamped the blade to a piece of dull brass plate with a 2" slice of pipe to protect the blade teeth. I then filled the entire hole with silver solder, the hard stuff. Keep the heat on the edges of the hole. No flux. The solder wont stick to dull unprepared brass. When it is cool some sanding to flatten the solder plug. put another blade over it and mark the serations and hole. use a small 5/32 drill bit and drill out each one of the seration marks. At this point you can remove the center in many ways, but I recommend grinding with a handheld rotary tool. cut each of the holes in the center. You dont have to be all that accurate about any of this to be successful. it will fit right on and all it takes for time is about 1/2 hour. These blades can be resharpened as well. Breaking this blade can be avoided by being sensitive to how the tool feels while you are cutting. The audible report they issue when being bent or side pressured is very definite, you just need to listen,
By Robert H. Haberkorn (Sothern California)
I bought this blade to replace the one that came with the kit. When I tried to install it the blade must have been just a little off center. As soon as I put pressure on it, the blade shattered into a dozen pieces. I haven't used the new one yet, I am afraid of breaking it too.
By M. Cooke
You might think this blade is made of solid gold for the price Fien wants for it, but it's not. If it was solid gold it would be cheaper! Go on E-Bay and search for Fein blades at a reasonable price and don't waste your money here.
Images Product
Buy Fein 63502106015 3-1/8-Inch High Speed Steel Segmented Saw Blade Now
0 comments:
Post a Comment