Buy Low Price From Here Now
The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6x12 panels and ripping. Fits Skil models 77 and 5860; Makita model 5077B; Milwaukee models 6377 and 6378; Black & Decker models 2700, 2710 and 3051; Craftsman model 2761; and DeWalt model DW377. Does not work with the DeWalt model DW378G.
Readmore
Technical Details
- Prazi USA beam cutter works with all 7-1/4-inch and 8-1/4-inch worm drive saws- Executes log cuts, compound angles, bandsaw cuts, and more
- Footplate and built in site ensures glide management; vertical blade allows smooth, exact, square cuts
- Will cut angles up to 45 degrees
- All products guaranteed--defective products can be returned for warranty replacement
See more technical details
By Derek Meier (Comfort, TX USA)
First off, this attachment will convert your saw into an awkward chainsaw. I say this to remind you that chainsaws do not make pretty cuts. That being said, I use this tool for notching and cutting S.I.P.S. It works very well for this purpose, and I really can't see how a more expensive product would do a job better enough to justify the much heftier price tag.
By William S. Burt Jr. (Port Orchard, WA USA)
I installed the Prazi on my Skil "77M" and used it to cut 11 7/8" engineered floor joists to length and square. It worked beautifully! No other "beam cutter" saw could cut that wide of joist in a single pass without cutting from the side of the joist. It also allows me to stack about 5 to 6 2x rafters up and cut the bird's mouth cuts all at once. I did find that the saw causes tear-out at the top of the cut, so it is a good idea to use a utility knife to scribe a line just outside the limits of the cut to prevent that.
The chain is essentially a chain saw so the cut is not as smooth as I might like, but, this is a unit for framing not finish carpentry.
Once you have installed the unit on your saw, you are able to remove it and re-install it as necessary pretty quickly. However, it does take some time and you should "group" your cuts to reduce the number of "changeovers" you need to make.
I found some chain saw bar oil, worked into the chain frequently seemed to help the system run smoother than just lubricating the tip, as recommended in the manual.
All-in-all an innovative and well-made product.
By Thomas J. Worker (Corona, California)
We used this to straight cut 6" beams, and 45' angles on 4" planks with ease. It was easy to assemble onto the Skil Saw and handled nicely.
However, since it's a chainsaw type system that needs to be oiled occasionally, a bottle with a very fine tip needs to be used to oil the chain sprocket as the oil hole in the arm is quite small. The bottle is not included but should be.
Additionally, it would be well worth the additional $20 to get the storage bag since it's shipping box will not last long to store the unit, and with the chain exposed, protection is needed to keep the chain from being damaged during transport and storage.
Overall a great, unique product that is reasonably priced. A must for any toolbox!
By Fred Saucier (New Hampshire)
Hi,
I'm building a log home and needed a saw to cut
up to about eight inches of pine logs,so when i
saw the Prazi beam cutter i thought this is just
the tool i was looking for.
I did'nt have the rite saw either so i had to buy
a new skil mag77 and the combination was great,it
is smooth and the cuts are perpect,no vibration
of any kind,a real solid tool built to last a long
time.If you need cuts up to 12in this is your tool
buy it you won't be sorry.
By J. Schwitters (Knoxville, TN United States)
After reading other reviews I was afraid to by this but I'm very pleased with the saw! I put it on a new Skil worm drive by simply removing the saw guard from the worm drive saw and attaching the Prazi in minutes. Other reviewers said that you are limited to a few saws and that's bull. This cuts clean and faster than a 15" saw and rolling the timbers to cut again. GREAT PRODUCT!!
Images Product
Buy Prazi USA PR7000 Beam Cutter for 7-1/4-Inch Worm Drive Saws Now
0 comments:
Post a Comment