Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

Buy Cheap Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

 "A must have for your table saw." 2009-10-18
By Russ Lyons (Lexington, KY)
I have this blade installed on my Grizzly 1023s. The quality of cut is incredible compared to blades in the $30-$50 dollar range that I have used before. I have used in on pine, ash and birch plywood and it cuts each without difficulty and no split out. The edges look as though they were sanded the cut is so smooth.

 "18 years and still the best" 2009-02-17
By C. R. Spiess (Fort Collins, CO USA)
I was reluctant to spend the money 18 years ago when I first bought this blade. I now see it as one of the very best investments I have ever made in tools.

 "Best saw blade out there" 2008-11-17
By Charles F. Poneleit (Sweetwater, TN United States)
I have probably over the 57 years into wood working never used as fine as the FORREST 10" Woodworker II saw blade. This is the best blade bare none on the market today. I also have the Forrest 8" dado King and the Forrest 12" 60 tooth miter saw blade. All exelent blades. I will owne or use no other.

 "excellent for low power saws" 2008-09-14
By F. Carrino
I have had this blade for a few months now and have used it to cut over 400 bd ft of hardwood (mostly walnut) with a Bosch 4000 portable Job-site table saw. I have used many different blades on this saw over the years (freud thin, Dewalt woodworker, etc etc) and this is the best blade I have ever used for this type of saw. The thin kerf is perfect for under powered saws. Now for my 3 hp Jet TS I use a full kerf blade (forrest is great as is the freud fusion) because the thicker metal is more stable and leaves a cleaner cut. I highly recommend this blade for ALL portable saws and any saw with less then 1 1/2 hp. It makes a very clean cut in both cross cuts and rips. This blade excels at cutting hardwoods and is worth the higher price.

 "Good Investment, not expensive when on sale for this high quality blade" 2008-08-15
By JD (Houston, TX United States)
I buy this woodworker II 10" 40 tooth 3/64" kerf & dampener on Amazon.com

I cut & rip softwood & hardwood. The cut is a lot smoother with this blade comparing to Bosch blade shipped w/ 4000-09 table saw.



Price range is around $70-100.

Although it's a thin kerf 3/64" compare to 1/8" of original Bosch blade, the carbide teeth is at least 2x bigger. You can resharpen this blade several times.



The joint between carbide teeth and the steel is kind of rusty when I receive it. The teeth is protected by vinyl during S&H. I may send email to Forrest to ask why. I don't see it's affect the cut quality. Just wonder why it's like that on brand new blade.














Images Product

Buy Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor Now