Buy Low Price From Here Now
Readmore
Technical Details
- Max Cut: 90º: 3/4"- Blade Capacity: 4" Inch
- Motor: 0.9 amps @ 110V 60Hz, 4500RPM
- Table: 7-1/2" x 5 -1/2 x 6-1/2
- Content: Table Saw, 1 x 4" 24 tooth Carbide Tip Blade & 1 x 4" Diamond Blade
See more technical details
By Elaine Killingsworth (Andalusia, AL)
This the is best little tool I own. It is easy to use for my small crafting cutting needs. You can't go wrong with this for your small wood cutting projects.
By William E. Gillmore
This product arrived with a wobble on the saw blade. I decided to try the other blade and see if it wobbled. I soon found out that to change the saw blade you have to disassemble the saw. To change the blade you must remove the motor as well as the safety ground, essentially every screw on the machine must be removed. Be sure the unit is unplugged as it is easy to trip the power switch, which now has the ground removed and the motor detached from the cast mount with a sort of sharp carbide blade attached. Removed the nuts to get the blade off requires two very large metric wrenches. When the saw is to be reassembled the blade must be realigned or it will cut at an angle. There is no facility for doing this except by trial and error. While doing that you will no doubt gouge the blade into the cast iron blade guard as there is almost no clearance between the blade and the cast mount.
Having discovered all that I mounted the second diamond tip blade. It wobbled too. Further investigation showed that the motor shaft was bent.
After all that there is more bad news. The saw has near zero adjustment in blade height. The adjustment is by set screw and has no method to slightly adjust, it just moves any way it wants. The saw is also noisy and rattles badly.
I regret the day I ever bought this saw. It is an unmitigated piece of [...].
By Harry Kruz (Gainesville, Florida)
At this price point, you are much better off with the
By B. E. Leissner (Texas)
I should have paid more attention to the describtion. This is too dangerous to be a toy and to little to be anything but a toy. Do Not buy this
By Clayton Schwartz (Quincy, Pa. United States)
A great idea for small work, but designed poorly. High speed, but no power. Even cutting 1/4" plywood bogs it down. Blade is not true enough to do fine work. The built in blade cover prevents cutting long pieces. They will not clear the bracket for the cover. Such a great idea if designed properly.
Images Product
Buy 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades Now
0 comments:
Post a Comment