Best Buy Saw Blades On Sale

44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws

2010-02-08T00:21:00.001-08:00

Buy Cheap 44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws

Buy Low Price From Here Now
Thicker and with the Tuff Tooth? design for the toughest cutting applications Enhanced beam strength that reduces blade deflection and twist 8% cobalt high speed cutting edge resists higher cutting temperature An addition 30% in width of the tool steel tooth makes for stronger teeth and less tooth strippage on most difficult cutting applications Applicable Materials = Most Metals Cutting Cap. = 1/4 in [Min] Cutting Edge Material = HSS-E (Co-M42) Cutting Length = 44 7/8 in Overall Packing Roll Style = Tuff Tooth? Teeth Per Inch = 10/14 Thickness = 0.0230 in Width = 1/2 in Quantity = 3 per pack
Readmore

Technical Details

- Box of 3
See more technical details

Images Product

Buy 44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws Now

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

2010-02-06T11:22:00.001-08:00

Buy Cheap Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
For chop saws and radial arm saws. These top-quality miter saw blades produce perfectly cut miter joints. Made with double-hard C-4 submicron carbide for up to 300% longer life. A heavier than normal steel plate and a negative face hook maintain maximum stability for the best cut. Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality. The tooth style (4 points and a flat) maximizes steady, clean cuts with no bottom splintering. You will be amazed by the extra-smooth, tight cuts you will get with this blade.
Readmore

Technical Details

- 20° Face Hook for easy feed
- DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
- Ends second-step finishing (jointing and sanding not required).
- Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
- Ends cutting 1/16" oversize to allow for RESURFACING
See more technical details

"Forrest Chopmaster 10 inch 80 tooth saw blad" 2009-12-15
By R. Stevens
I read other reviews of this item with some skepticism. I mean, could it really be as good as some people claimed? Yes it is. It is by far and away the best blade I've ever used in my miter saw. I've used it so far to cut cherry for a cabinet I'm building and I still can't believe how smooth the cuts are. Although I have not tried to finish a cut edge, from the look and feel of the cut there is no need to sand the cut edges. This blade is worth every penny that I paid for it.

"Everything it claims to be" 2009-02-21
By PellaCPC (Northern Wisconsin)
I am a custom home builder and we do extensive wood trim in our homes. I bought this blade on the reviews and Forrest reputation, and have not been sorry. The blade performs flawlessly and will out-cut any of my Freud, De-Walt and other trim blades. Buy it - you won't be sorry.

"Stairs Top 20 " 2008-01-31
By Michael N. Sanders
I love it, I like it, This blade stays sharp & I won't some more of them.

"Swirls..." 2008-01-09
By Bruce A. Staats (Rochester, MN)
I have purchased two of these and sent both back. Test cuts showed swirls. I owned a prior blade and used it for years with excellent results. Their quality control has slipped.

"Outstanding performance" 2007-09-06
By John Zygmunt (Philadelphia, Pa)
I have used many blades over the years yet i am still impressed every time I make a cut with this blade. I live by the rule: "you get what you pay for." You certainly get the best here.

Images Product

Buy Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor Now

DEWALT DW3791 8-Piece T-Shank Jig Saw Blade Set

2010-02-04T22:30:00.001-08:00

Buy Cheap DEWALT DW3791 8-Piece T-Shank Jig Saw Blade Set

Buy Low Price From Here Now
Get all the all the blade types you need for your DEWALT or Bosch jig saws with the DEWALT DW3791 eight piece blade set. Crafted out of cobalt speed for extended life and stored in a durable vinyl pouch, these blades are designed to last. The set comes with a variety of t-shank blades, including the 4-inch DW3755 8-TPI aluminum/fiberglass and DW3762 10-TPI laminate down cutting blades. Other 4-inch blades consist of the 6-TPI DW3750 and DW3753 as well as the 10-TPI DW3760. Additionally, the 3-inch DW3776 24-TPI and DW3770 14-TPI blades along with the DW3765 12-TPI trim coping blade are enclosed.
Readmore

Technical Details

See more technical details

"A nice little set" 2008-12-10
By Jeffrey L. Power (Coon Rapids, MN)
What a differance new (Sharp!) blades make. I was hating my jig saw, till I used these. I like my saw again! Its nice to cut straight lines again!

This is a nice little general purpose set, which is great if you do a little of everything.

"Great Addition!" 2008-09-29
By L. Flack (Stone Mountain, GA)
This kit is a great addition to the new types of jig saws. All types of blades in one neat package.

"Easy blade change" 2007-02-16
By J. Rogers (Amarillo, TX)
Like the easy change blades, nice "case" for storage, and good blade life.

"Great little pack" 2006-08-28
By Didier Boulos-callias (Antigua & Barbuda)
Great little pack of Blade. Like tools, do not hesitate to buy quality, you will win on the long run.

Another good package from Dewalt.

Didier

Images Product

Buy DEWALT DW3791 8-Piece T-Shank Jig Saw Blade Set Now

Fein 6-35-02-127-03-0 E-Cut Blade-2 1/2-FMM250 -10Pk

2010-02-03T09:04:00.001-08:00

Buy Cheap Fein 6-35-02-127-03-0 E-Cut Blade-2 1/2-FMM250 -10Pk

Buy Low Price From Here Now
This is a 2-1/2-inch aggressive plunge cutting saw blade for the Multimaster. This blade has a Japanese pull saw tooth pattern that allows for very aggressive cutting in wood and other materials. Use this blade in place of a handsaw or jamb saw when there's not a lot of room to maneuver. This blade is perfect for doorjambs, baseboards, toe kicks and flooring work. Avoid materials that might contain nails. For wood up to 2", Drywall, plasterboard and soft plastics.
Readmore

Technical Details

- e-cut blade
- precision cut
- 10 pack
- wide
See more technical details

"Excellent quality" 2010-02-01
By J. Richardson (Ruston, LA)
These blades were a perfect fit for the Fein multi-saw. They are a great quality.

"Great Price" 2010-01-31
By K. Brack
I have a crew that works for me.And that tool has become a life saver. More times than I can count. And at this price its half of what the local lumber yards want.

"Fein is fine with me." 2009-04-10
By Charles A. Boy Jr. (Everett, Ma United States)
The multimaster is a perfect tool for old house renovations. It suits so many otherwise awkward sawing jobs, wood removal and chiseling jobs. The blades will cut while bent, so it wood shaves too.

"same blade available for fraction of this price at amazon!" 2008-08-19
By Juan Doshuevos (California)
look elsewhere for the same blade, you can get a 3 pack of em for far less than 90 odd dollars these vampires are charging for one.!!!

why does amazon allow this to happen? caveat emptor! (that means 'buyer beware' )

Images Product

Buy Fein 6-35-02-127-03-0 E-Cut Blade-2 1/2-FMM250 -10Pk Now

MK Diamond 158278 4-1/2-Inch Wet Cutting Continuous Rim Saw Blade with 5/8-Inch Arbor for Tile

2010-02-01T20:22:00.001-08:00

Buy Cheap MK Diamond 158278 4-1/2-Inch Wet Cutting Continuous Rim Saw Blade with 5/8-Inch Arbor for Tile

Buy Low Price From Here Now

Readmore

Technical Details

- Designed for the MK-145 tile saw
- Wet cutting continuous rim
- Will cut thru any type of ceramic tile with minimum chipping
- 4-1/2" blade
See more technical details

Images Product

Buy MK Diamond 158278 4-1/2-Inch Wet Cutting Continuous Rim Saw Blade with 5/8-Inch Arbor for Tile Now

SKIL 94916 16pc Jigsaw Blade Set 94916

2010-01-31T06:45:00.001-08:00

Buy Cheap SKIL 94916 16pc Jigsaw Blade Set 94916

Buy Low Price From Here Now
Includes 16-Piece Jigsaw Blade Set - 94916, Wood/Scroll Cutting Blade - 94512, (2) Wood/Fine Cutting Blade - 94310, (3) Mutli-purpose/Semi-smooth Cutting Blade - 94410, (3) Wood/Fast Cutting Blade - 94306, (3) Metal/Smooth Cutting Blade - 94218, (2) Metal/Fast Cutting Blade - 94214, Plaster/Drywall Blade, Soft Material Blade
Readmore

Technical Details

- High carbon steel and high speed steel designs for durability when cutting a variety of materials
- Handy for scroll, fine and fast cutting in wood, smooth and fast cutting in metal and Multi-purpose cutting in plastic and composite materials
- Additional blades included for plaster and drywall and smooth cutting in soft materials
- Fits all Skil and other major brand U-shank jig saws
See more technical details

"Haven't Used them all, but GOOD DEAL" 2007-08-17
By Jonathan D. Coffman (Washington DC, USA)
I bought these to match my Skil jigsaw when it was a Gold-box item and these were a $5 upgrade. I'm happy with them so far and I'm glad I got them here instead of the local box store.

"Great Saw Blades" 2007-08-08
By Robert A. Hamm (Minersville, Pa USA)
Well I have to state I am not a contractor but only do wood working in my home, so I'd say my requirements are about medium-light duty. However, these blades are outstanding so far. There is no problem fitting them into the new saber saw I got and they do cut like a bandit, even though, I've only used the wood blades so far. However, the freebies that came with the saw, even though, it is an orbital, were nothing compared to these. These blades cut through the wood, not chop or rip through it like some tend to do. They did not "Burn - out" after a couple uses, like way so many tend to do early oh.

Now how they will hold up to "Heavy Daily Use" I have no idea, but for my purposes they are a wise choice, and I will be ordering more of these without question.

I'd recommend them to anyone needing this type of blade. I feel confident they will last quite a while even under the Heavy uses.

Also, if you need to know which blade to use for what material, the package has each blade and its uses right on the back of the package behind each blade. You get a few for wood, a few for metal, some wood & palstic blades, ect. It is a good variety Plus, they are packaged very well.

Images Product

Buy SKIL 94916 16pc Jigsaw Blade Set 94916 Now

Porter-Cable 13901 5-Inch, 5 Hole Standard Adhesive-Back Sanding Pad (for 334 Random Orbit Sander)

2010-01-29T17:28:00.001-08:00

Buy Cheap Porter-Cable 13901 5-Inch, 5 Hole Standard Adhesive-Back Sanding Pad (for 334 Random Orbit Sander)

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"Works fine" 2010-01-13
By CamGuy (Cowden, IL United States)
After original pad crumbled from age, I purchased this replacement pad for my one-hand 5" P-C sander. Works great during the first few hrs of use so far.

Images Product

Buy Porter-Cable 13901 5-Inch, 5 Hole Standard Adhesive-Back Sanding Pad (for 334 Random Orbit Sander) Now

Freud LU87R009 9-Inch 22 Tooth ATB Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

2010-01-28T03:54:00.001-08:00

Buy Cheap Freud LU87R009 9-Inch 22 Tooth ATB Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower.Perma-Shield coating helps this blade pull 1/3 less on the saw which translates into over 38% more cutting power.ideal working range is from 3/4" to 2-3/4" thick. Application: Heavy-Duty Ripping For Underpowered Saws
Readmore

Technical Details

- Laser cut blade bodies and expansion slots
- Kickback reducing design
- Perma-SHIELD coating
- Covered by Freud's limited lifetime warranty
See more technical details

"SERIOUS FRAMER TIP:" 2009-07-23
By K. Isbell (bastrop, tx, usa)
serious framer tip: if you were to take an 8 1/4" worm drive 'skilsaw', remove the guard, grind out a groove at the front of the base where the blade comes through, and put this freud 9" thin kerf blade on it; you will have an efficient (but not OSHA approved) plating saw capable of cutting two 1 1/2" plates at once (3 1/8" cut). the problem with most 9" blades, if you can find one, is that they are thick sheets of steel almost 1/8" with a 1/8 kerf. this combination of weight and friction will bog the saw down during heavy ripping and becomes several times more dangerous than heavy cross cutting. with this blade, it is thinner and lighter, and has the anti-stick perma-shield barrier. these factors create a smoother, more efficient, and safer performance under heavy ripping conditions with a plating saw.

"Freud 9 inch Ripping Blade" 2009-07-18
By Texlyn (Vermont)
This blade is awesome. We used it to rip 2 x 12's into 2 x 4's and it cut through them like a hot knife through butter.

"Works great!" 2009-03-09
By Jared Yates (North Carolina USA)
I had trouble finding a local source for a 9-inch blade to go on my old Craftsman model 113 table saw. I use a radial arm saw for cross cuts, so the table saw usually only comes out for ripping. That made this blade aseem like a great choice, and when I set it up and tried it out it turned out to be a great choice indeed. A Rip cut on pine 2x4s ends up so smooth that looks like the piece has been sanded. So far I've also used it on poplar with equally great results.

"professional woodworker" 2008-09-27
By J. Crouse (New York State)
I use the 10" version of this blade and use one constantly. The thin kerf lets it cut through hardwoods like butter. The thin kerf is a big help with an under powered saw. I have a number of blades, but I use this the most

"Excellent Product" 2006-03-20
By Brian Leinonen (Anderson, SC)
In keeping this breif. I have an old model DeWalt that I have been struggling with hardwood rips on. Since I got this Freud blade the problems are gone, cuts are smoothe as can be. I will buy this product again.

Images Product

Buy Freud LU87R009 9-Inch 22 Tooth ATB Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

General Tool 120 Standard Pipe and Tube Cutter Range 1/8" to 1 1/8" Tubing

2010-01-26T17:52:00.001-08:00

Buy Cheap General Tool 120 Standard Pipe and Tube Cutter Range 1/8" to 1 1/8" Tubing

Buy Low Price From Here Now
Cut copper, aluminum and other thin-wall tubing and pipe with diameters up to 1-1/8" or as small as 1/8". The economical standard pipe cutter features anti-friction, flare groove rollders that let you cut tubing close to the flared ends, thus avoiding tubing replacements in existing installations. Hardened steel reamer slides and locks in place; retracts for safety when not in use. Cast steel frame with replaceable hardened alloy steel cutting wheel.
Readmore

Technical Details

- Comfortable and easy-to-use model, designed for a lifetime of dependable use.
- Smooth-action retractable jaws expand for tubing sizes from 1/8" to 1-1/8", and up to 3/16" in thickness.
- Easily slices through copper, aluminum, brass, stainless steel and other tin-wall tubing.
- Includes a retractable reamer with dual cutting edges.
See more technical details

Images Product

Buy General Tool 120 Standard Pipe and Tube Cutter Range 1/8" to 1 1/8" Tubing Now

Corona Clipper AC 7241 Razor Tooth 13-Inch Tree Pruner Saw Blade

2010-01-25T09:34:00.001-08:00

Buy Cheap Corona Clipper AC 7241 Razor Tooth 13-Inch Tree Pruner Saw Blade

Buy Low Price From Here Now
Corona AC7241 13" Razor Tooth Saw Tree Pruner BladeCorona AC7241 13" Razor Tooth Saw Tree Pruner Blade Features:; Razor tooth design cuts twice a fast as conventional saws; 3-sided impulse-hardened razor teeth; 13?Ç¥ curved, tempered steel alloy blade; Fits Corona models TP 6870, TP 6850, TP 6830, TP 3811 and TP 3841 "Corona AC7241 13" Razor Tooth Saw Tree Pruner Blade Specifications:; Die cast zinc alloy pruning head; Fully heat-treated, Teflon coated cutlery steel blade with 1" diameter cutting capacity; Pass through shearing action; Fits models TP3712, TP3841 (1202-0533), and TP3851
Readmore

Technical Details

- Razor tooth design cuts twice a fast as conventional saws
See more technical details

"Very satified" 2009-01-06
By Rita Blunt
This is a very sharp blade for cutting.

I had one very high large limb to remove. I was able to cut this down with little effort, because of the blade.

Thanks

Images Product

Buy Corona Clipper AC 7241 Razor Tooth 13-Inch Tree Pruner Saw Blade Now

Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals

2010-01-24T00:14:00.001-08:00

Buy Cheap Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals

Buy Low Price From Here Now

Readmore

Technical Details

- Professional grade C-1 carbide
- Negative hook angle
- Triple chip tooth grind
- Precision ground carbide tips
- Heat vents for cooler operation
See more technical details

"what a pleasant surprise!" 2009-09-21
By dr. cliff (New Olreans, LA United States)
I bought this blade to demo the box off a 17' box van, all FRP panels and extruded aluminum 'bones'. The Sawzall with a demo blade was working but slowly and with the huge noise & vibration you expect from a Sawzall. So I tried this blade in my Makita Hypoid.

This blade is not some kind of last-resort, better-than-nothing solution for cutting aluminum. My Makita was eating aluminum about like it eats pine 2by lumber! Smooth, near-effortless cutting, easy to control, and the saw never really worked up a sweat. Hours of Sawzall work was done in about 15 minutes.

Two things you should know-

1. This blade makes A LOT of noise. Hearing protection is a must.

2. This blade spits aluminum 'sawdust' all over the place. It's not sharp like steel trimmings but it's aggravating. I brushed myself off with a whisk broom before going back in the house.

"An outstanding aluminum cutting saw blade" 2009-08-22
By Joe T. Buchanan (Greensboro, NC United States)
This is an interesting story. I had an aluminum decorative fence to install in my backyard and went to Lowe's and Home Depot to find a non-ferrous blade. Neither had one in stock, so I turned to their web pages. In both cases, navigating their web pages was so laborious, I gave up. I figured there was no way that Amazon would have the blade, but I gave them a shot anyway. To my surprise, they had it! If I were Lowe's and Home Depot, I'd be very embarrassed.

Anyway, the blade has worked great. I have made over 100 cuts with it so far and it doesn't seem to be getting dull. Not only that, the blade cuts through aluminum cleanly and smoothly like a hot knife through butter. I really couldn't be more satisfied with my purchase.

"Oshlum SBNF-072560 7-1/4 in. 60 tooth saw blade" 2009-05-30
By Larry L. Henderson
I have been cutting aluminum with a 36 tooth metal blade but I was not cutting a smooth cut. But what a diffrence The correct blade makes From now on 36 teeth blade is great for steel and 60 teeth blade for aluminum never too old to learn V/R Larry

"Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade" 2009-05-03
By John Q. Consumer
This blade seems to be top-notch. I do not have experience with other non-ferrous metal cutting blades, but this one seems to do the job perfectly: Nice smooth cuts, without burrs or distortion. I was able to purchase this one for $19.99, plus $4.99 shipping, so it is one of the most affordable blades of this type available right now.

Images Product

Buy Oshlun SBNF-072560 7-1/4-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Diamond Knockout Arbor for Aluminum and Non Ferrous Metals Now

Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor

2010-01-22T13:18:00.001-08:00

Buy Cheap Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Anti-vibration slots
- Professional grade C-3 carbide
- Anti-kickback tooth design
- Aggressive hook angle
- Thin kerf for fast cuts
See more technical details

"BEAM SAW BLADE" 2009-10-02
By Hippy Dave (Wisconsin)
What no one adresses in any reveiws for a beam saw is the fact that many saws are underpowered for blades this size.

The Oshlun blade performs well as ripping or cross-cut blade. I performed many full depth rips w/ the blade in reclaimed cedar beams. All things considered it performed like a champ. I wish the saw had more power (older style Makita beam saw) I was concerned the blade may pinch o rjam and cause a nasty kick back, or worse yet get too hot and start to wobble / wander. None of the above happened. I'm a carpenter by trade, this is my first time w/ a beam saw, so take it for what its worth - Good price and fast shipping.

Images Product

Buy Oshlun SBW-164032 16-5/16-Inch 32 Tooth ATB Beam Saw Blade with 1-Inch Arbor Now

Black & Decker 77-717 Piranha 7-1/4-Inch 18 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor

2010-01-21T04:35:00.001-08:00

Buy Cheap Black & Decker 77-717 Piranha 7-1/4-Inch 18 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Buy Low Price From Here Now
7-1/4", 18 Teeth Piranha Circular Saw Blade, For Fast Semi-Smooth Rips, Crosscuts & Miters, 5/8" Round Diamond Knockout, Cuts All Types Of Wood, Plywood, Masonite, Wallboard, Particle Board, Composition Board & Plastic, Resharpenable, Do Not Use With Masonry, Concrete Or Metals, Carded.
Readmore

Technical Details

- Ultra-thin kerf for superior cutting performance
- Aggressive tooth geometry for use in a wide variety of materials
- Special heat treating process for longer life
See more technical details

"Sawcat and Piranha - Nothing better" 2007-03-03
By T. Gabriel (Raleigh, NC USA)
I have had my B&D Sawcat since 1984 and run nothing but Piranha blades. When I was working as a carpenter - mostly as the cut-man on framing and outside finish crews, I kept at least ten blades and had them sharpened as needed. They are the toughest, longest lasting blades available. For interior trim they cut well but the 24 tooth is smoother. I am using the Sawcat now for DIY projects around the house and my last Piranha blade (bought in 1990 or so) still cuts like a hot knife through butter. I am ordering a new blade now just because it only seems fair to give the old girl a new blade for all the good work she's done for me...

Images Product

Buy Black & Decker 77-717 Piranha 7-1/4-Inch 18 Tooth ATB Thin Kerf Crosscutting and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor Now

Shark Corp 01-2312 12-Inch Carpentry Saw Blade

2010-01-19T19:31:00.001-08:00

Buy Cheap Shark Corp 01-2312 12-Inch Carpentry Saw Blade

Buy Low Price From Here Now
12" replacement blade. Blades are easily replaceable with the push of a button. 12", 14-point, fits model No. 10-2312
Readmore

Technical Details

- Push button handle release
- Diamond ground teeth
- One-year warrantee
See more technical details

"A must have saw!" 2009-03-11
By Edward E. Gbur Jr.
During the last ice storm we had a rick of damp firewood in our living room. To get the damp oak started we used pine 2 by 4's but they had to be cut before putting them in the fireplace. This saw blade was magic! Boy I could whip through those pine pieces like a hot knife cutting through butter this blade.

Mari

"Awsome" 2008-07-10
By Amed S. Mesa (graham, nc)
This is the fastest cutting saw for quality and price. very sturdy design! If you need a saw this is the blade for you!

Images Product

Buy Shark Corp 01-2312 12-Inch Carpentry Saw Blade Now

Corona Clipper TP 6870 14-Foot Compound Action 1-1/4-Inch Capacity Tree Pruner With 13-Inch Razor Tooth Saw Blade, Telescoping Fiberglass Handle & Non-Slip Grip

2010-01-18T11:46:00.001-08:00

Buy Cheap Corona Clipper TP 6870 14-Foot Compound Action 1-1/4-Inch Capacity Tree Pruner With 13-Inch Razor Tooth Saw Blade, Telescoping Fiberglass Handle & Non-Slip Grip

Buy Low Price From Here Now
The Corona Clipper professional 14-foot compound action tree pruner features a high-strength zinc-alloy pruning head and a fully heat-treated, high carbon Teflon coated steel blade. Sporting a large 1-1/4-inch diameter cutting capacity and a heavy duty chain-drive compound action pulley system that triples your cutting power, this tree pruner is an ideal choice for personal or professional use. The unit also features an exclusive powerglide rope pull system and curved 13-inch razor-sharp conventional saw that maximizes pruning versatility. Other features include a comfortable 24-inch foam grip and a lightweight telescoping fiberglass pole that can adjust from 7-feet to 14-feet. The pole also features a twist-lock adjustment for quick and safe pole adjustment. The pruner carries a limited lifetime warranty.
Readmore

Technical Details

- Ideal pruner for heavy-duty orchard pruning
- 14-foot compound action tree pruner with Teflon coated steel blade
- Comfortable 24-inch foam grip
- Exclusive powerglide rope pull system and curved 13-inch razor tooth saw blade
- Limited lifetime warranty
See more technical details

"Corona Tree Pruner" 2009-08-25
By Benny Edwin Fries (Paris, TN)
I've used it several times, no complaints, seems to be as advertised and in general a good product. Saw blade cuts well

"Prunner" 2009-08-20
By TC (Maine)
I read the reviews and had doubts, but I needed something like this to clear the brush and limbs near the powerline coming into the house (don't electrocute yourself!). I bought it- shipped quickly and have been extremely pleased ever since. I have cleared all of the limbs I've needed to do for years and hadn't done- apple, birch, spruce, cherry, plum, maple, dogwood, Chinese elm - and it works great. I prefer the 14' length but it is just as effective all the way out. When I pull on the rubber rope handle - it slips, so I wrap the rope around the handle a few times then pull. It has tangled once or twice, but fiddling untangles it. The saw cuts quickly in both direction- handled 3" apple without problem, even moving limbs. But its the pruner that I really like. It beats using a handsaw from a 16 foot ladder, or a chain saw from a 10' step ladder (my old way!). Of course I have to drag off all of the brush I cut, but I get some help with that! -The limbs fall straight down, so one has to ready for that.

Great tool for tool minded folks.

"Troublesome" 2009-07-15
By Lynn R. Morgan
For a high end pruner, I expected better.

The chain has almost no tension and keeps jumping out.

A nut fell off and was lost. The pull handle fell off.

The above happened in the first hour of use.

This pruner is rather heavy and is hard to manage when

it is fully extended. I'll go back to using my cheap

aluminum pruner for everything that it will reach.

"Corona 14-foot compound action tree pruner" 2009-04-01
By Joe L. Henely (Arkansas)
I had used a friend's less expensive aluminum shaft pruner in the fall of '08, and found it cut the larger branches better than the Corona. When fully extended, I found that the upper fiberglass section flexed too much when cutting larger branches. a sturdy rope, rather than the chain, would be preferable, because the chain in the cutting head frequently had to be re-aligned.

"How to use the tool" 2009-01-22
By N. Ngo
I just bought Corona Clipper Professional 14-Foot Tree Pruner, but I don't know how it work at all. I have tried to pull up and down the cord after assebling the saw blade as required, then the saw doesn't funtion at all.

Please tell me how to use that, thanks!

Images Product

Buy Corona Clipper TP 6870 14-Foot Compound Action 1-1/4-Inch Capacity Tree Pruner With 13-Inch Razor Tooth Saw Blade, Telescoping Fiberglass Handle & Non-Slip Grip Now

Oregon 109179 Saw Chain Hydraulically Assisted Bench Grinder/Sharpener

2010-01-17T04:09:00.001-08:00

Buy Cheap Oregon 109179 Saw Chain Hydraulically Assisted Bench Grinder/Sharpener

Buy Low Price From Here Now
HYDRAULICALLY ASSISTED BENCH GRINDER 115V
Readmore

Technical Details

- Includes a template for: depth-gauge setting, and wheel contour
- Eliminates manual locking and unlocking of the vise as each cutter is sharpened
- The grinder comes with three grinding wheel with the thickness of 1/4-Inch, 1/8-Inch, and 3/16-Inch
- Includes a wheel-dressing brick
- 12 month warranty for defects in material and workmanship
See more technical details

"Saving Money" 2009-06-28
By David J. Lemieux
So far so good. I've sharpened 10 chains so far and they have all worked very well.

"Great product. High quality." 2009-06-07
By Cornelis Baars (Mariposa, California U.S.A.)
I have used the Oregon Hydraulic Bench-Mounted Grinder for several weeks and I am very satisfied, it works great.

Images Product

Buy Oregon 109179 Saw Chain Hydraulically Assisted Bench Grinder/Sharpener Now

ARS Pruning Turbocut Saw with 9-1/2-Inch Blade #SA-CAM24LN

2010-01-15T20:30:00.001-08:00

Buy Cheap ARS Pruning Turbocut Saw with 9-1/2-Inch Blade #SA-CAM24LN

Buy Low Price From Here Now
The ARS turbocut straight tooth saw features a 9-1/2-inch straight blade and a rubber padded handle for added comfort. Unlike conventional saw teeth which are filed and alternately bent, the ARS blade is taper ground, and each tooth is honed to a precise knife-edge sharpness. The tri-edge tooth design allows for easy cutting on the pull. The unit's incredibly sharp patented blade will produce remarkably clean cuts every time, and is made from hard chrome-plated steel for extra toughness and rust resistance. The saw comes complete with a matching holster for easy and safe storage.
Readmore

Technical Details

- Ideal pruning saw for heavy-duty garden and orchard use
- Blade features easy pull Turbocut action
- Replaceable blade
- Designed and built for professional grade applications
- 9-1/2-inch hard-chrome plated Turbocut blade
See more technical details

"Top of the line products" 2009-02-21
By A. M. Bucci (Punta Gorda, Fl USA)
I have been using ARS pruners for years. I never knew they had pruning saws until I saw them on Amazon. These hand held pruning saws are fabulous. I have over five acres of landscaped property that I work on all the time. I have purchased many different saws over the years and I can honestly say that these are the best I have ever used for hand pruning. Great product.

Images Product

Buy ARS Pruning Turbocut Saw with 9-1/2-Inch Blade #SA-CAM24LN Now

Kershaw 7" Folding Blade Saw w/Black Santoprene Handle Md: 2550

2010-01-14T13:20:00.001-08:00

Buy Cheap Kershaw 7" Folding Blade Saw w/Black Santoprene Handle Md: 2550

Buy Low Price From Here Now
Kershaw 7" Folding Blade Saw w/Black Santoprene Handle Md: 2550, Folding saw features include: premium swedish saw steel blade. Santoprene molded handle. Push button safety lock. Includes lanyard hole., Type: Saw Blade Type: Saw Blade Length: 7" Length: 16" Steel: Swedish Saw Steel Handle Material: Santoprene Weight: 6.4 oz Sheath: N/A Edge Type: Saw Closed Length: , Manufacturer: KERSHAW KNIVES/KAI USA, Model: 2550
Readmore

Technical Details

- Saw
- 7"
- 16"
See more technical details

Images Product

Buy Kershaw 7" Folding Blade Saw w/Black Santoprene Handle Md: 2550 Now

Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating

2010-01-12T10:25:00.001-08:00

Buy Cheap Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
10" x 40 Tooth, Carbide Tipped, Finishing Saw Blade, Thin Kerf.
Readmore

Technical Details

- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micro grain titanium carbide for extreme durability, razor-sharp cuts and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

"Freud Diablo good value" 2009-09-22
By D. OGRADY (St Louis, MO USA)
Good blade for the price. Used in a 10" Rigid contractor's table saw, produces smooth rips and crosscuts in poplar, pine, MDF, and red oak with minimal tear out. Definitely cleaner than OEM Rigid blade, closs to Freud/Rigid topline blades if you don't force the cut and take your time. Would definitely buy again.

Images Product

Buy Freud D1040X Diablo 10-Inch 40-Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

MK Morse ZCZA14A 59 1/4-Inch x 1/8-Inch x .014 14TPI Wood Cutting Bandsaw Blade

2010-01-11T02:23:00.001-08:00

Buy Cheap MK Morse ZCZA14A 59 1/4-Inch x 1/8-Inch x .014 14TPI Wood Cutting Bandsaw Blade

Buy Low Price From Here Now

Readmore

Technical Details

- Suitable for use on Wood and easy-to-machine metals
- Fits Standard Stationary Machines
- One Blade per Package and 5 Packages per Box
- Manufactured in Canton, Ohio USA!
- Carbon Hard Edge Flexible Back
See more technical details

"Blades break too soon" 2009-09-11
By Gary Bruce
I purchased two of these blades. They are used only to cut very thin plastic. I was very careful in installing and adjusting the blades. I'm been around machine shops for over 40 years. I'm not new to adjusting bandsaws.

The first blade lasted maybe a total of 30 minutes of cutting. The second blade didn't last 10 minutes.

Other blades on the same saw have absolutely no problem. I have yet to have another blade break.

As with most bandsaw blades, these blades broke at the weld. My suspicion is that the weld was not annealed properly.

The blades cut very well while they last. They run very quiet and produce a smooth cut. Although we were cutting only straight cuts, I'm sure the narrow, 1/8" blade would allow some intricate cutting.

"Morse bandsaw blade" 2009-01-25
By John C. Taylor (Pendleton, OR USA)
I have found the Morse brand bandsaw blades to work better than the OEM blades that came with the saw. They appear to last longer, and to not fail as easily, as the OEM blades.

"Saw Blade" 2008-06-27
By Kenenth D. Rupkalvis (San Antonio, TX)
Of all the saw blades I have purchased, this is certinly one of them. It looks like a saw blade, it feels like a saw blade and it cuts like a saw blade, it must be a saw blade. However, I didn't tasted it. It did arrive quickly. It came in a very nice brown padded mailing envelope. I saved the envelope for wrapping Christmas presents this year. I only wish the blade would come in colors other then steel. I think a green blade might be nice.

This is an odd sized blade and I was very happy to find one.

Images Product

Buy MK Morse ZCZA14A 59 1/4-Inch x 1/8-Inch x .014 14TPI Wood Cutting Bandsaw Blade Now

Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade

2010-01-09T18:40:00.001-08:00

Buy Cheap Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade

Buy Low Price From Here Now
Optimized, Symmetric 60 degree Tooth Design. Innovative heat vent expansion slot designs. Fully heat treated. Cuts gutters, vinyl siding & PVC piping .
Readmore

Technical Details

- Optimized, Symmetric 60-Degree Tooth Design
- Innovative Heat Vent Expansion Slot Designs
- Fully Heat Treated
- Cuts Gutters, Vinyl Siding and PVC Piping
- First vinyl siding circular saw blade
See more technical details

"Vinyl siding blade" 2009-11-12
By William D. Chesnut
This blade works well for cutting vinyl siding.... it was able to cut thru the siding without cracks or shattering. I bought it to help with an addition and all of the cuts were to siding still on the house. I am about to side the new addition and have no doubt that this blade will make the cuts I need to complete this siding job... how well it works in colder weather is questionable but I think any cut in cold weather can be tricky.

Images Product

Buy Irwin Industrial Tools 11830 7-1/4-Inch Universal Arbor Vinyl Circular Saw Blade Now

Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor

2010-01-08T14:47:00.001-08:00

Buy Cheap Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting.combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut.blades produce less heat keeping the cut edge crisp. Application: Plexiglass And Plastics
Readmore

Technical Details

- Laser cut blade bodies and expansion slots
- Kickback reducing design
- Tri-metal brazing
- Covered by Freud's limited lifetime warranty
See more technical details

"Fantastic for Plastic" 2009-11-21
By Woodsmithy (Green Bay, WI USA)
This blade cuts Lexan and Plexiglass without the usual melting and cracking. Wish that I would have bought it years ago. I didn't buy it sooner because I didn't think that it could cut that much better, but it does. Save yourself a lot of frustration when cutting plactic, buy this blade.

"amazing" 2009-01-03
By John W. Arnold (n. versailles, pa United States)
I PURCHASED THIS BLADE TO CUT 1/4" PLEXIGLASS, IT DOES THAT WITH A SMALL RESIDUE REMAINING AFTER THE CUTS. THESE FALL OFF WITH VERY LITTLE FINGER PRESSURE. MY PLEXIGLASS HAD NO PAPER BACKING. THIS BLADE ALSO CUTS WOOD AND PLASTIC...IT'S THE BEST CUTTING BLADE IN MY WORKSHOP. GET ONE AND SEE WHAT I MEAN. JOHN ARNOLD

"Does the job" 2007-09-26
By kilograham
I used this to cut 1/2" Lexan for some windows- overall it did a great job, I did notice it took some bites but I don't know if this was the blade or my saw (powermatic 66). Cut finish was decent, and it didn't splinter or crack at all. With the cost of lexan I thought it prudent to get an appropriate blade, this one worked well.

"Cuts plexiglass like it is butter" 2006-02-17
By C. Regan (KC,MO)
This blade rocks and was well worth the price. I use abs plastic and plexiglass quite frequently and I can honestly say that this blade is far superior vs. even my thin kerf 80 or 60 tooth freud blades. I used 1 inch thick lexan for its first test, no chipping it left very small fine shavings instead of little plexi chips. It is a very quiet blade as well. Overall I am very impressed with this product.

Images Product

Buy Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor Now

Fein 63502126013 1-3/8-Inch Precision E-Cut Blade

2010-01-08T11:02:00.001-08:00

Buy Cheap Fein 63502126013 1-3/8-Inch Precision E-Cut Blade

Buy Low Price From Here Now
MultiMaster e cut blade has flush cut design allows for flush cuts to floors in tight areas. Ideal for doorjambs, baseboards, toe kicks, and flooring work. No. 6 35 02 126 01 3: 1 3 8" wide, 1 per pack No. 6 35 126 03 0: 1 3 8" wide, 3 per pack No. 6 35 0
Readmore

Technical Details

- Aggressive 1-3/8" saw blade for Multimaster tool
- Perfect for aggressive flush cutting applications
- Japanese Pull saw tooth pattern makes rapid plunge cuts in wood and softer material
- Great for doorjambs, baseboards, toe kicks, and flooring work
- Flush cut design allows for completely perpendicular cuts to flooring in tight areas
See more technical details

"Mister" 2009-12-09
By C. L. Klingensmith (Jacksonville, Florida)
The Fein saw blade is very percise and quick making fast order of the intended job it is made for.

"SHORT LIFE SPAN" 2009-12-08
By Troy Jones (Dallas)
FOR THE PRICE IT DOES NOT LAST. YOU WILL GET MAYBE 3 TO 4 CUTS THEN THE TEETH ARE WORE

DOWN OR BROKE OFF

"Fine Fein" 2009-08-23
By C. L. Moore (Houston, TX United States)
These are great for cutting softer woods and plywood. Don't use them on hard woods like maple because the teeth will deteriorate quickly. If you need to cut hardwoods use the 1" wide blades, they are much better. Fein makes good products but they must think that we are all rich like they must be. Their prices are way too high. Soon there will be others that will interchange and the prices will come down. In the meantime we will keep making them rich.

"right price" 2009-08-08
By Nc Brownlow (berkeley, ca)
The right price on a can't be replicated product. I wore out my last saw, and accidently got the standard. These precision blades are much nicer, make a better cut and last longer.

"Cut well for about 2 minutes" 2009-06-27
By mudbug99 (WV)
I agree with others, these precision blades dull quickly and are very fragile. I broke off the last 10 teeth or so on each end after about 5 minutes trimming pine molding. Pretty ridiculous, especially considering the quite high price tag. Get the standard blades, they last longer.

Images Product

Buy Fein 63502126013 1-3/8-Inch Precision E-Cut Blade Now

Fein 6-35-02-106-08-0 3-1/8-Inch Segment Blade - FMM 250, 5-Pack

2010-01-08T06:39:00.001-08:00

Buy Cheap Fein 6-35-02-106-08-0 3-1/8-Inch Segment Blade - FMM 250, 5-Pack

Buy Low Price From Here Now
The Fein High Speed Steel Saw Blades are perfect for cutting wood, putty, fiberglass, or carbon fiber. They can precision cut sheet metal up to 1.0 mm thick (20 gauge) with no deformation or flying sparks. The segmented style can cut right angles without overcutting. Includes: (5) 6-35-02-106-08-0 3-1/8" High Speed Steel Segmented Saw Blades
Readmore

Technical Details

- segmented saw blade
- for cutting
- 5 pack
See more technical details

"False advertising" 2009-11-09
By Adam Lehotay (USA)
The item advertised was purchased and paid for by me. After a series of communications, I was misled and the order was mysteriously canceled, the item removed from the website, and my money was refunded against my wishes and contrary to what I was told would happen. I purchased an item as advertised and it was removed from the shelf with no good explanation and in violation of all purchaser/seller agreements. I am very disappointed and will only shop at Amazon when all other options are exhausted.

Images Product

Buy Fein 6-35-02-106-08-0 3-1/8-Inch Segment Blade - FMM 250, 5-Pack Now

BOESHIELD T-9® - VALUE PACK

2010-01-07T02:37:00.001-08:00

Buy Cheap BOESHIELD T-9® - VALUE PACK

Buy Low Price From Here Now
Boeshield T-9 dries to a thin waxy film that clings to metal. It will loosen rusty & corroded parts & is safe on paints, plastics & vinyl's. Rust free removes rust & stains from any surface. Blade & Bit removes resin, gum & pitch from saw blades, drill bits, tool tops etc. Just spray, wait 60-90 seconds & wipe off. If rusty, use Rust Free after Blade & Bit - protect with Boeshield T-9. Each of the T-9, Rust Free and Blade & Bit are also sold separately.
Readmore

Technical Details

- Includes; 12 oz aerosol T-9, 8 oz Rust Free and 8 oz Blade Bit
- T-9 dries to a thin waxy film that clings to metal for protection. Safe on paints, plastics & vinyl
- Rust Free removes rust and stains from any surface including cast iron and steel
- Blade & Bit removes resin, gum and pitch from saw blades, drill bits, too tops, etc.
See more technical details

"Limited applications" 2009-12-13
By couillion (south louisiana)
There are several rust prevention products available, and Boeshield has worked as advertised, but with limitations in areas with high humidity. In the shop, I've used "Boeshield T-9" on cast iron and unprotected steel tools. Saw tables, drill press tables, grinder tool rests, radial arm saw support tube, clamp screws and bars, squares and saw blades. The best results with Boeshield alone have been on the small tools, clamps, chisels and combination squares. The next best result was a drill press table, cleaned and wiped with Boeshield and then a coat of paste wax. I'm not convinced that it is any better -or - worse than J&J Paste Wax alone on larger flat surfaces like a saw blade or cast iron saw table. If you don't inspect or use your tools regularly, it may not be for you. Once Boeshield is applied and dry, it is tough to remove. If any rust has started, you'll have a mess cleaning it back down to bare metal again. If you're not sure whether this is the way to go, satisfy yourself with it on a small tool or saw blade first. Follow the instructions on "Rust Free" and "Blade & Bit Cleaner" to clean the surfaces you want to protect, then apply Boeshield. I cut the bottom 2" inches from a 5 gallon bucket to clean saw blades and small tools in.

Images Product

Buy BOESHIELD T-9® - VALUE PACK Now

44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws

2010-01-03T04:24:00.001-08:00

Technical Details

- Box of 3
See more technical details

Images Product

Buy 44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws Now

Prazi USA PR7000 Beam Cutter for 7-1/4-Inch Worm Drive Saws

2010-01-01T19:46:00.001-08:00

Buy Cheap Prazi USA PR7000 Beam Cutter for 7-1/4-Inch Worm Drive Saws

Buy Low Price From Here Now
The Prazi USA PR7000 Beam Cutter (for 7-1/4-Inch Worm Drive Saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6x12 panels and ripping. Fits Skil models 77 and 5860; Makita model 5077B; Milwaukee models 6377 and 6378; Black & Decker models 2700, 2710 and 3051; Craftsman model 2761; and DeWalt model DW377. Does not work with the DeWalt model DW378G.
Readmore

Technical Details

- Prazi USA beam cutter works with all 7-1/4-inch and 8-1/4-inch worm drive saws
- Executes log cuts, compound angles, bandsaw cuts, and more
- Footplate and built in site ensures glide management; vertical blade allows smooth, exact, square cuts
- Will cut angles up to 45 degrees
- All products guaranteed--defective products can be returned for warranty replacement
See more technical details

"used for installing S.I.P.S." 2009-05-15
By Derek Meier (Comfort, TX USA)
First off, this attachment will convert your saw into an awkward chainsaw. I say this to remind you that chainsaws do not make pretty cuts. That being said, I use this tool for notching and cutting S.I.P.S. It works very well for this purpose, and I really can't see how a more expensive product would do a job better enough to justify the much heftier price tag.

"Does what it says" 2008-09-16
By William S. Burt Jr. (Port Orchard, WA USA)
I installed the Prazi on my Skil "77M" and used it to cut 11 7/8" engineered floor joists to length and square. It worked beautifully! No other "beam cutter" saw could cut that wide of joist in a single pass without cutting from the side of the joist. It also allows me to stack about 5 to 6 2x rafters up and cut the bird's mouth cuts all at once. I did find that the saw causes tear-out at the top of the cut, so it is a good idea to use a utility knife to scribe a line just outside the limits of the cut to prevent that.

The chain is essentially a chain saw so the cut is not as smooth as I might like, but, this is a unit for framing not finish carpentry.

Once you have installed the unit on your saw, you are able to remove it and re-install it as necessary pretty quickly. However, it does take some time and you should "group" your cuts to reduce the number of "changeovers" you need to make.

I found some chain saw bar oil, worked into the chain frequently seemed to help the system run smoother than just lubricating the tip, as recommended in the manual.

All-in-all an innovative and well-made product.

"Great Addition to any Toolbox!" 2008-06-02
By Thomas J. Worker (Corona, California)
We used this to straight cut 6" beams, and 45' angles on 4" planks with ease. It was easy to assemble onto the Skil Saw and handled nicely.

However, since it's a chainsaw type system that needs to be oiled occasionally, a bottle with a very fine tip needs to be used to oil the chain sprocket as the oil hole in the arm is quite small. The bottle is not included but should be.

Additionally, it would be well worth the additional $20 to get the storage bag since it's shipping box will not last long to store the unit, and with the chain exposed, protection is needed to keep the chain from being damaged during transport and storage.

Overall a great, unique product that is reasonably priced. A must for any toolbox!

"Buy it,you won't be sorry" 2008-02-11
By Fred Saucier (New Hampshire)
Hi,

I'm building a log home and needed a saw to cut

up to about eight inches of pine logs,so when i

saw the Prazi beam cutter i thought this is just

the tool i was looking for.

I did'nt have the rite saw either so i had to buy

a new skil mag77 and the combination was great,it

is smooth and the cuts are perpect,no vibration

of any kind,a real solid tool built to last a long

time.If you need cuts up to 12in this is your tool

buy it you won't be sorry.

"Paid for itself on the first job." 2007-08-30
By J. Schwitters (Knoxville, TN United States)
After reading other reviews I was afraid to by this but I'm very pleased with the saw! I put it on a new Skil worm drive by simply removing the saw guard from the worm drive saw and attaching the Prazi in minutes. Other reviewers said that you are limited to a few saws and that's bull. This cuts clean and faster than a 15" saw and rolling the timbers to cut again. GREAT PRODUCT!!

Images Product

Buy Prazi USA PR7000 Beam Cutter for 7-1/4-Inch Worm Drive Saws Now

Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

2009-12-31T11:32:00.001-08:00

Buy Cheap Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Saves 1/3 wood loss on each cut.
- Feeds easily when used for moderate rips and crosscuts on a table saw.
- Reduces "JUMP IN" for better "PULL-CONTROL."
- Eliminates bottom splintering on RADIAL CROSSCUTS.
- With new 30° ATB tooth style this blade stops totally, ALL bottom and top splintering on ply veneers on both radial and table saw machines
See more technical details

"A must have for your table saw." 2009-10-18
By Russ Lyons (Lexington, KY)
I have this blade installed on my Grizzly 1023s. The quality of cut is incredible compared to blades in the $30-$50 dollar range that I have used before. I have used in on pine, ash and birch plywood and it cuts each without difficulty and no split out. The edges look as though they were sanded the cut is so smooth.

"18 years and still the best" 2009-02-17
By C. R. Spiess (Fort Collins, CO USA)
I was reluctant to spend the money 18 years ago when I first bought this blade. I now see it as one of the very best investments I have ever made in tools.

"Best saw blade out there" 2008-11-17
By Charles F. Poneleit (Sweetwater, TN United States)
I have probably over the 57 years into wood working never used as fine as the FORREST 10" Woodworker II saw blade. This is the best blade bare none on the market today. I also have the Forrest 8" dado King and the Forrest 12" 60 tooth miter saw blade. All exelent blades. I will owne or use no other.

"excellent for low power saws" 2008-09-14
By F. Carrino
I have had this blade for a few months now and have used it to cut over 400 bd ft of hardwood (mostly walnut) with a Bosch 4000 portable Job-site table saw. I have used many different blades on this saw over the years (freud thin, Dewalt woodworker, etc etc) and this is the best blade I have ever used for this type of saw. The thin kerf is perfect for under powered saws. Now for my 3 hp Jet TS I use a full kerf blade (forrest is great as is the freud fusion) because the thicker metal is more stable and leaves a cleaner cut. I highly recommend this blade for ALL portable saws and any saw with less then 1 1/2 hp. It makes a very clean cut in both cross cuts and rips. This blade excels at cutting hardwoods and is worth the higher price.

"Good Investment, not expensive when on sale for this high quality blade" 2008-08-15
By JD (Houston, TX United States)
I buy this woodworker II 10" 40 tooth 3/64" kerf & dampener on Amazon.com

I cut & rip softwood & hardwood. The cut is a lot smoother with this blade comparing to Bosch blade shipped w/ 4000-09 table saw.

Price range is around $70-100.

Although it's a thin kerf 3/64" compare to 1/8" of original Bosch blade, the carbide teeth is at least 2x bigger. You can resharpen this blade several times.

The joint between carbide teeth and the steel is kind of rusty when I receive it. The teeth is protected by vinyl during S&H. I may send email to Forrest to ask why. I don't see it's affect the cut quality. Just wonder why it's like that on brand new blade.

Images Product

Buy Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor Now

Universal Bi-metal Oscillating Saw Blade 10 Pack

2009-12-30T03:24:00.001-08:00

Buy Cheap Universal Bi-metal Oscillating Saw Blade 10 Pack

Buy Low Price From Here Now
Effectively cut through nail embedded wood and metal objects with the Versa-Tool Bi-Metal universal oscillating saw blade. Adaptable to most oscillating tools Versa-Tool's metal cutting blades deliver quality results at a pocket friendly price.
Readmore

Technical Details

- Universal arbor will fit Bosch PMF180E, Fein FMM250Q, FMM 250, SECCO 916 and HFT oscillating tools
- Bi-Metal construction for long life cutting wood and metal products.
- Ideal For Demolition, Plumbing, Remodeling And General Wood and Plastic Cutting
- Laser beam welded HSS cutting edge
- Economical, quality alternative
See more technical details

Images Product

Buy Universal Bi-metal Oscillating Saw Blade 10 Pack Now

Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor

2009-12-29T15:06:00.003-08:00

Buy Cheap Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Super thin kerf for fast cuts
- Professional grade carbide
- Heat vents for cooler operation
- Anti-kickback tooth design
- Expansion slots to prevent warping
See more technical details

"You get what you pay for." 2009-02-22
By Phillip L. Carothers (ok)
Delivery from Amazon was excellent. This blade literally smokes wood. I does leave a clean cut so it gets a two. I had to fight it through 3/4" birch plywood. I would go with Freud or Forrest if you can afford it.

"Finished the set" 2009-01-18
By Joe B (Atlanta)
This is a great blade that finished the set for my new Porter Cable 18 volt saw. Locally, even Home Depot and Lowes didn't have a 40 tooth blade and I had to go on line. Glad I did. It arrived in record time and in excellent condition. I was happily using it the day it arrived. Excellent value at even a higher cost.

Images Product

Buy Oshlun SBW-065040 6-1/2-Inch by 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch KO Arbor Now

Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast

2009-12-29T15:06:00.001-08:00

Buy Cheap Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast

Buy Low Price From Here Now
One kit takes the place of dozens of hole saws while enabling fast dust free cutting exact size holes from 1-7/8 up to 9" inches in diameter. Kit includes high quality adjustable hole cutter, ball bearing mounted ABS shield with soft rubber gasket to trap dust and shavings, user replaceable sets of both High Speed Steel and Tungsten Carbide blades, hex wrenches, and sturdy carry case. Shield keeps cutter perpendicular to work surface and cutter has adjustment knob to limit the depth of cut when making holes in walls or ceilings to avoid accidentally cutting wires or pipes.

All parts precision machined, measure bar is chrome plated and marked in both inches and millimeters. ABS composite plastic shield is made from the same material as used in hockey helmets and is lightweight, strong, and will not discolor with age. Perfect for installing recessed lights, tubular skylights, in-ceiling speakers, ceiling fans, duct vents, or providing access holes for repairs.

Kit includes user replaceable High Speed Steel blades for cutting wood, MDF, Lexan and other plastics, acoustic tile, tongue and groove, laminates, and Tungsten Carbide blades for cutting sheetrock, plaster, cement or Hardi board, fiberglass, OSB, chipboard, plywood, and similar materials. Twin blades for faster cutting and perfect balance eliminate the need for balance bars which can break off inside other cutters.

Requires ¼ the torque of common hole saws so a smaller drill can be used and cordless drills can cut more holes before needed to be recharged. ½ cord drills that are rated for maximum hole saw size of 3-1/2 inches for wood can cut holes up to 12 in diameter in plywood using the Hole Pro hole cutter.

Like all Hole Pro Power Series kits the shield can be used with the Hole Pro XL-Arbor kit to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as provided with the adjustable hole cutters.
Readmore

Technical Details

- Adjustable hole cutter for cutting 1 7/8" to 9" holes in ceilings, walls and floors
- Depth of cut: 3/16" (5mm) - 1 " (25mm) cut from one side, 2" (50mm) cut from 2 sides
- Cuts plywood, sheetrock, lathe & plaster, MDF, acrylic sheet, ceiling tiles, fiberglass, etc
- For any 3/8" drill, Twin blades - User replaceable.
- Comes with one High Speed Steel blade set and one Tungsten Carbide blade set.
See more technical details

"Easy to use, makes very clean holes" 2009-11-15
By Aaron K. Olmstead
I'm very pleased with the Hole Pro I bought. It's pricey, but, as long as you've got a high-torque drill, it makes neat, tidy holes in sheetrock, without the ragged edges I get with the traditional hole saws I've used. The dust cup thing really does work. Tip: get the blades spinning fast, freely, then press them gently into the surface you're cutting, to avoid jamming. I regret I only got this at the end of my recessed lighting project!

"great hole cutter and very well built" 2009-07-23
By Michael Winters
I have used a variety of adjustable hole cutters and hole saws for shop and construction work over the years but none that work as well as this twin blade hole cutter. The blade design enables my DeWalt 1/2" cordless drill (manufacturer rated for maximum 3-1/2" hole saw in wood) to cut 10" holes in plywood and Hardie board in less than a minute.

Holes in sheetrock take seconds and all the dust and the cut plug are held inside the shield and quickly fall out when the cutter is flipped over to dump everything into a 5-gallon bucket. I don't need to tape up plastic sheeting or even use a drop cloth when cutting holes for can lights in sheetrock or plaster ceilings.

The 1-7/8" to 9" size range is great for installing light cans. Last year I put in light cans that took cutouts from 2-1/4" up to 8-5/8" and this tool was all I needed. I have seen carbide grit hole saws for can lights but they only come in 4-3/8, 6-3/8, 6-5/8, 6-7/8 inch sizes and while that used to work for tungsten lights in the past, now there are over 20 different diameter cans stocked just at Home Depot and most of them are not in these old standard sizes. Even so, the cost of just these 4 hole saws runs well over $200 and when they wear out you need to spend $50-70 for a new one. With the X-230 a new set of tungsten carbide blades is only $17 and I always have a spare pair in the tool's carry case.

The high speed steel blades are great with wood and most plastics. I did 21 holes 7-1/8" diameter cutouts in 5/8" tongue and groove ceiling last month and I took less than an hour to cut the holes and there was no splintering. I also was able to use the orange adjustment knob to set the cutting depth so I did not have to worry about cutting the electrical wires that were already run in the space above the ceiling.

I have even used this hole cutter for production jobs where I have cut out hundreds of discs in 3/4" plywood or MDF and the blade holders cinch down tight so I get exact size holes or discs time after time. I leave the shield on just to keep my hands out of harms way but it can be used without the shield on a drill press as well.

For cutting without a drill press the ball bearing mounted shield keeps the hole cutter straight so it is like having a very light and portable drill press when cutting holes in 4x8 sheets where a drill press is not going to work. Even cutting can or vent holes or putting audio speakers holes in the ceiling having the shield makes it easy to get straight side cuts so the grills and trim rings all sit flush and look neat and professional every time.

It surprised me at first how well it cut wood with a 18v cordless hand drill and cutting holes in sheetrock was fun instead of a chore. I now even use the hole cutter to make access holes for running wire or making repairs. I cut 3-1/4" plugs ahead of time in a piece of scrap sheetrock and then cut the access holes 3" in diameter. After the wire has been pulled I screw a small piece of wood to the wall or ceiling as a backing and then push in the sheetrock plug and add a 3rd sheetrock screw in its center. I can do one thin coat of mud and the patch is ready to paint. I can do this in no time at all and the end result is a very clean patch and happy customers. They can paint the patch themselves the next day and no need for another worker to come and patch a large hole in the drywall.

I replaced a shower mixer valve by cutting a 8" diameter hole in the wall on the other side and after I was done soldering in the new valve I cut a 8-1/4" plug and patched the hole. So much better than cutting out the sheetrock stud to stud and a whole lot faster to do. When I do work for hospitals and hotels they cannot use the room until there is an airtight seal (and using fireproof materials) so they really appreciate it when I do the work and leave them with a ready to paint wall or ceiling.

I have a couple models of single blade adjustable hole cutters, NORA 6" and LSD Inc.'s HC-12, but the Hole Pro twin blade hole cutter is superior in every way imaginable. With twin blades there is perfect balance and no balance bars to change. With balance bars if they are under tightened or over tightened they break off and leave the threaded section inside the tool. The twin blades are easy to adjust with the way the bar is marked. Put one at 7" mark on each side and you get a 7" hole - no math needed. The high speed steel blades on the X-230 are great for cutting wood but the bits provided with the NORA and the LSD Inc. kits do not work well at all.

This tool is built to cut holes faster and cleaner than any other way I can think of and it is built to last year after year and not let you down in the middle of a job. After I let one of my crews use this hole cutter I had to buy ones for the other trucks as they were fighting over who got to use it.

"Well built, easy to use" 2009-03-30
By Lost My Mind (California, United States)
The Hole Pro X-230 is a well built tool that makes the task of cutting holes much simpler. If you are required to cut holes into drywall, you cannot live without this tool. It is also capable of cutting woods, plastics, and other materials.

This worked great with my puny 14.4v Dewalt drill. The plastic shield does an *excellent* job of containing dust, debris, and flying chunks. Anyone doing renovation work or a job where cleanup is a big issue, this is a must have tool. I cannot ever imagine going back to cutting holes with a drywall saw.

All of the parts are heavy duty and well built. The shield doesn't leave marks, the blades are strong, and the spinning motion is perfectly balanced. Do not waste your money with the cheaper imitations (~$50).

Because the saw blades are adjustable, this can literally replace a dozen hole saws of various sizes. The only reason to keep hole saws is for specialty applications such as cutting metal or tight locations. While the shield is removable, the "bar" that the blades attach to is a fixed length.

Images Product

Buy Hole Pro X-230 Kit: 1-7/8" to 9" Infinitely Adjustable Twin Blade Hole Saw Cutter 3" 4" 5" 6" 7" 8" 9" Hole Wood Sheetrock Plaster Fiberglass Plastic MDF Cement Board. Use ¼ Torque of Hole Saw to Cut Twice As Fast Now

Freud D0840S Diablo 8-1/2-Inch 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8-Inch Arbor

2009-12-29T04:03:00.003-08:00

Buy Cheap Freud D0840S Diablo 8-1/2-Inch 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.
Readmore

Technical Details

- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

"Great Saw Blade" 2008-11-04
By D. C. Spencer (Ashaway, RI)
Very happy with this item and the service. Just what I ordered and on time.

"okay blade" 2008-01-14
By Paul Bowman (Baltimore, MD USA)
This 40-tooth Freud is quick & pretty smooth, but I find cuts aren't clean enough for prefinished trim or prefinished flooring installs.

The stuff I do varies, but it's mostly small remodel work, so I just switched from my 10-inch miter saw to an 8-1/2-inch. Thought this blade worth a try, but I'll be looking for less aggressive cutting & more teeth for my own finer-cut needs.

"Cleanest cuts I've ever made!" 2007-08-19
By SeaDog (Amherst, NH)
This blade has little-to-zero "chip-out". Then end-cuts are so smooth, they seem polished! Forget getting cheaper contractor blades in the future. These are worth every penny, for not having to clean-up the cuts ! What a time-saver!

Images Product

Buy Freud D0840S Diablo 8-1/2-Inch 40 Tooth ATB Fine Finishing Miter Saw Blade with 5/8-Inch Arbor Now

Freud D1244X Diablo 12-Inch 44 Tooth ATB General Purpose Miter Saw Blade with 1-Inch Arbor

2009-12-29T04:03:00.001-08:00

Buy Cheap Freud D1244X Diablo 12-Inch 44 Tooth ATB General Purpose Miter Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now
12" x 44 Tooth, Diablo Finishing Blade, Red Perma Shield Coating, Stabilizer Vents, Carbide Tipped, Thin Kerf Design.
Readmore

Technical Details

- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

"Just What I Hoped It Would Be" 2009-03-27
By Saw Guy (Southern Maryland)
I replaced a worn 80-Tooth Tenryu blade that came with my used Bosch Sliding Compound Miter Saw 5412L1 and I'm glad I did. The first cut was as smooth as a baby's butt. I've been too busy to use it much, so I have no feedback on longevity. I don't regret the purchase and I highly recommend it for those do-it-yourselfers like myself. I've got alot of projects planned and I'm confident the broad spectrum ability of this blade will work for my deck build as well as crown molding here in the near future. I'll update with more feedback when I've put it through its paces.

"nice blade " 2007-12-30
By pokey
I use this blade primarily for framing. I have it in a Dewalt DW708 scms. Cuts fast + clean and lasts a long time. For cutting 2x pine studs, plates, blocks, etc.- this is the blade you want. Also the picture they show is different than the blade I received. On the blade I was sent the hook angle of the teeth is less aggressive and the gullet's are not as deep.

Images Product

Buy Freud D1244X Diablo 12-Inch 44 Tooth ATB General Purpose Miter Saw Blade with 1-Inch Arbor Now

Delta 35-7670 8-Inch Stacked Dado Set

2009-12-28T19:35:00.001-08:00

Buy Cheap Delta 35-7670 8-Inch Stacked Dado Set

Buy Low Price From Here Now
The DELTA 35-7670 8-inch Stacked Dado Set includes two 8-inch dado blades made to DELTA's exacting standards. DELTA uses a laser cutting technique to ensure that each blade is accurately cut without any warping. You'll have exceptionally smooth cuts, and fewer splintering and tear-outs, thanks to the extremely sharp cutting edges with C4 micro-grain carbide teeth that are ground so that each tooth planes the wood. The expansion slots are precisely cut to minimize noise and edge vibration. Also included are 4-tooth carbide tipped chippers to deliver flat bottom cuts, as well as stainless steel shims for making ultra-fine width adjustments. Included with the set is a storage case that protects the blades against damage.
Readmore

Technical Details

- Two 8-inch blades with 24-tooth carbide tips
- Micro-grain carbide teeth minimizes splintering
- Included steel shims let you make width adjustments
- Four-tooth carbide tipped chippers for flat bottom cuts
- Set includes two blades, six 4-tooth carbide tipped chippers, 12 steel shims, and a heavy-duty storage case
See more technical details

"Delta 35-7670 stacked dado set" 2009-12-23
By Shawn D. Peterson (Webster, MN)
This is an excellent dado set. It has flexible setup with the various choppers and shims. It makes beautiful cuts that are flat bottomed and crisp, very clean side wall cuts. I do fine cabinetry with this blade, it does not disappoint. I used a Sears adjustable wobble blade before this, and it made atrocious cuts by comparison. I could never set the width quite right, and it chewed the wood away like a rat rather than the nice surgical cuts the Delta blade makes. Clearly, this is the difference between a $30 blade and a $150 set like this. I didn't want to spend $280 on some of the high end dado sets out there, so I bought this one as a middle ground expecting some minor flaws I'd just need to live with. I have been pleasantly surprised, not only are there no flaws in the way this dado cuts, but it is easy to use, set up, and the thickness table in the instructions is very handy and serves as a great reference. This blade gets 5 stars from me, I'm not sure what spending another $100 would get me. As a side not, the case is pretty good. Mine has the flimsy wing nuts that broke too, but it still works, and the blades are great.

"Very good product at a great price" 2009-09-18
By Woodworker (Stratford, CT)
I've been shopping for a stacked dado set for some time now, but couldn't seem to find something with a good rating at a decent price point....until now. I had not seen Delta blades advertised much, but I took a chance based on other reviews. I have not been disappointed. Although I've only used it a few times, so far the cuts have been clean, with almost no tearout. The set is boxed really nicely in a sturdy plastic case with secure hold-downs for all the blades and spacers. I haven't used it on plywood yet, but cuts across the grain in solid hardwood have been excellent.

"Nice dado set" 2009-04-24
By G. Bounds
This is my first dado set so I can't compare to others but I am very happy with this product. I was unable to find a more complete set in the price range as this one. I like the case that it comes in, makes it a lot easier for storage when not in use. Everything is packaged inside in its own spot. With the shims to the 4 tooth wing cutters to the 24 tooth blades, this set compares to ones over $200. Very Happy with purchase.

"One of the best" 2009-01-25
By M. Keene (Spokane, WA, USA)
Excellent tool. A wide range of spacers for very accurate setting of dado width, and all are easily accessible in the mounting case. I'd rate this set as one of the best I've reviewed.

"I like "clean cuts"" 2008-08-24
By Waltman01 (Fla.)
I chose this set from the several that was listed.

1st- number of teeth on blades.

2nd- Price

3rd- Packaging

Have not been sorry for my choice. It has given me very clean cuts. The metal shims are sooo much better than the plastic shims. The package is very good - except for the plastic nuts used to secure the blades. One was broken when received. If it had metal wing nuts would give it "5 star" rating.

Images Product

Buy Delta 35-7670 8-Inch Stacked Dado Set Now

Fein 63502134015 2-1/2-Inch Standard E-Cut Blade

2009-12-27T10:47:00.001-08:00

Buy Cheap Fein 63502134015 2-1/2-Inch Standard E-Cut Blade

Buy Low Price From Here Now
E-Cut Universal blade is for cutting metal up to 2.0mm, wood, plaster cardboard and synthetic materials.
Readmore

Technical Details

- Longer lasting 2-1/2-inch saw blade for Multimaster tool
- Perfect for flush cutting applications
- Finer tooth pattern provides more control and longer blade life
- Great for doorjambs, baseboards, toe kicks, and flooring work
- Flush cut design allows for completely perpendicular cuts to flooring in tight areas
See more technical details

"Fein Bi Metal blades" 2009-12-16
By Richard Lovelace
The Bi-metal blades are expensive but a better value. Buying in bulk saves $$$.This tool is amazing when you need it. My key to success is not use it unless nothing else will work as well. As blades are pricey but effective

"Works like they are supossed to!" 2009-12-12
By Tracy Campbell
Depending on what your cutting and the frequency of use, these blades do the trick!

"poor quality" 2009-11-22
By Lawrence Concannon (phila PA)
2 out of three of the blades had faulty welds , blade broke off at spot welds seconds after use

"Fein Blades" 2009-11-14
By Diamonds In The Rough (Minneapolis, MN)
There is nothing like OEM blades from Fein. These three pack are the most economical I have found. The transaction went as smooth as ever and I received the product sooner than anticipated. Thanks

"ALMOST NOT WORTH THE COST" 2009-11-09
By Aaron L. Ledbetter (greenville, al United States)
Fein 6-35-02-151-02-0 1-1/8-Inch Universal E-Cut Blade. I HAVE TO THINK ABOUT IT EVERY TIME I BUY THESE BLADES BECAUSE THEY DON'T LAST LONG AT ALL. IN THE TIGHT SPOTS THEY ARE WORTH THE COST BUT MOST OF THE TIME I USE THE SAWZALL.

Images Product

Buy Fein 63502134015 2-1/2-Inch Standard E-Cut Blade Now

Bosch T318A 5-1/4-Inch 24-TPI High-Speed Steel Bosch Shank Jigsaw Blade, 5-Pack

2009-12-26T02:15:00.001-08:00

Buy Cheap Bosch T318A 5-1/4-Inch 24-TPI High-Speed Steel Bosch Shank Jigsaw Blade, 5-Pack

Buy Low Price From Here Now
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4" long, 10 TPI, for straight fine cuts No. T101BR:
Readmore

Technical Details

- This is Bosch's economical blade for basic cuts in metal
- Application: sheet metal 10-to-16-Gauge, thin metals 1/16-Inch-to-1/8-Inch (ferrous and nonferrous, pipes 2-1/2-Inch in diameter, tube stock, angle iron
- Benefits: makes straight cuts in pipes, profiles and sheet metal
- TPI: 24
- Overall length: 5-1/4-Inch
See more technical details

Images Product

Buy Bosch T318A 5-1/4-Inch 24-TPI High-Speed Steel Bosch Shank Jigsaw Blade, 5-Pack Now

Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor

2009-12-26T00:51:00.001-08:00

Buy Cheap Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Precision ground teeth for smooth, accurate cuts
- Fully hardened plate runs truer longer
- Heavy gauge high carbon steel for extended life
- 5/8" Arbor
See more technical details

"Saw blade" 2009-06-27
By Terry Bromfield (albuquerque, nm USA)
Price is good,but doesn't last long at all.Made several cuts on a sheet of 4x8 plywood and the blade was already dragging and causing some burn marks on the cut.I have a good 3 Hp saw so it's not the saw it was the blade.

"Junk do not buy" 2009-03-14
By Matt (Houston, TX)
Complete junk I tried to give it 0 stars. Could not cut 3/4 9 ply birch, 3/4 7 ply maple or 3/4 7 ply oak. It whines as if it is bound in the saw but its not. There is no burning on either side of the cut. It just will not cut.

"Great for the price" 2008-01-09
By Tool Time Tim (Reno USA)
It works just fine. Not recommonded for high use, but good to make a few cuts on melinane every now and then.

Images Product

Buy Irwin 11870 10-Inch 180 Tooth TCG Plywood, OSB, Veneer, and Plastic Cutting Saw Blade with 5/8-Inch Arbor Now

MK Morse ZCZC06 59 1/4-Inch x 3/8-Inch x .014 6TPI Wood Working Bandsaw Blade

2009-12-26T00:49:00.001-08:00

Buy Cheap MK Morse ZCZC06 59 1/4-Inch x 3/8-Inch x .014 6TPI Wood Working Bandsaw Blade

Buy Low Price From Here Now

Readmore

Technical Details

"GREAT BLADE - GREAT VALUE" 2009-05-12
By OILFIELD SPARKY (Dallas, TX)
I purchased a small Delta (now B&D) benchtop bandsaw for small projects. I bought the MK Morse blades to replace the original Delta blade. What a difference the blade makes. The cuts are much smoother and the workpiece is easier to maneuver. This blade makes the saw useable for more projects than I had anticipated.

"All went fine" 2009-02-12
By Thomas R. Hudson
The process went fine. The procuct was high quality. Shipping was fast and packed well

"Review for bandsaw blade" 2008-12-26
By Random
This blade was very good. I bought this blade to cut hardwood and thats what it did. Also it was hard finding this exact size but Morse was the only available brand that had it. Overall great purchase will buy another one if something happens to my current one.

Images Product

Buy MK Morse ZCZC06 59 1/4-Inch x 3/8-Inch x .014 6TPI Wood Working Bandsaw Blade Now

Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp

2009-12-26T00:48:00.001-08:00

Buy Cheap Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp

Buy Low Price From Here Now
Laser cutting guide ensures precision miter cutting up to 45deg . Adjustable pivot fence allows cutting larger stock. Features 2 HP motor, trigger safety button and transparent blade guide. Includes extension wings, hold-down clamp, arbor wrench, dust bag and spare motor brushes. Blade Diameter (in.): 10, Amps: 10.8, Bevel: Single, HP: 2, Max. Degree Miter Cuts - Left: 45, Fence: Adjustable pivoting, Laser Guide: Yes, Wrench Included: Yes, Dust Bag Included: Yes
Readmore

Technical Details

- FREE SHIPPING!
See more technical details

"Worth Every Penny and then some." 2008-06-02
By cmr (ATL)
Great saw, specially for that price. Barely over $100. Does everything I need for light work around the house.

"Good service" 2008-01-15
By Hongbing Zou (nj)
I bought this to cut wood for my deck. The quality is not so good, a part was broken in a few cuts. I called the customer service, a new part was sent to me very quickly. When I called again to express that it's hard to replace the part myself, a RN it given to me, and a new saw was sent to me in a few days. The saw has all the good functionalies I needs for all the cuts, at the price, it's a great deal.

"occasional need" 2007-09-27
By Robert Butler (Riverside county CA)
I am very satisfied with this piece of equipment. The star rating is a reflection of the fact that I know the broader range of what is available. I do finish work around the house and occasionally else where. It does the job I need with baseboard, casing, various other moulding, etc. If one was going to use this type of saw regularly, more amps would be important.

"great value" 2007-09-26
By Lyn L. Solinas
This saw was delivered in excellent condition, works as expected and is a great value for the price. I never thought I could purchase a sliding compound miter saw with laser for under $100.

"All in one item" 2007-05-23
By Jesus M. Barbosa Arabda
This machine is great... but I did receive one part broken... the back safety lock. Could you please help me?

Images Product

Buy Northern Industrial Compound Sliding Miter Saw With Laser - 10in. Blade Size, 10.8 Amp Now

Delta 28-568 16-Inch Band Saw Blade 82-Inch x 3/8-Inch, 6 Teeth per Inch

2009-12-25T03:28:00.005-08:00

Buy Cheap Delta 28-568 16-Inch Band Saw Blade 82-Inch x 3/8-Inch, 6 Teeth per Inch

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"lousy blade--don't bother" 2008-07-24
By B. Robson (Denver, CO)
As the title states, this is a lousy blade. The blade is too thin to have any stability (kerf thickness) and wanders all over.

I was never able to get the blade to cut straight. As soon as the blade would start to cut, it would try to make a left hand turn, causing the blade to bind in the kerf. After several hours fiddling with my saw's adjustments, I finally gave up on this blade and it hit the trash.

Don't waste your money on this blade.

Images Product

Buy Delta 28-568 16-Inch Band Saw Blade 82-Inch x 3/8-Inch, 6 Teeth per Inch Now

Makita 792616-2 Reciprocating Blade

2009-12-25T03:28:00.003-08:00

Buy Cheap Makita 792616-2 Reciprocating Blade

Buy Low Price From Here Now
For use with Model No. 4390D and 4390DW cordless reciprocating saw. 5 blades per card. No. 792540 9: 24TPI, for mild steel, plywood, masonite, plastics and formica; overall length: 3 15 16" No. 792615 4: 24TPI, for mild steel, plywood, masonite, plastics
Readmore

Technical Details

- 5-7/8" x 9TPI Recipro Saw Cordless Saw Blades
- Ideal for wood cutting.
- For use with #4390D.
- 5 per pack.
See more technical details

Images Product

Buy Makita 792616-2 Reciprocating Blade Now

Mibro 491071 6-Inch Stacking Dado Blade

2009-12-25T03:28:00.001-08:00

Buy Cheap Mibro 491071 6-Inch Stacking Dado Blade

Buy Low Price From Here Now
Cuts grooves from 1/4in. to 13/16in. Carbide teeth for exceptional performance. Fits 8in., 9in. and 10in. radial arm or table saws. Includes 6in. outside right hand blade, 6in. outside left hand blade, four 1/8in. chippers, 1/6in. chipper and 5 metal shims. Compact case. Limited lifetime warranty. Blade Use: Groove Cutting, Blade Diameter (in.): 6, Arbor Size (in.): 5/8, Tip Type: Construction Micro Grain Carbide, Blades (qty.): 12 Pc. Assorted
Readmore

Technical Details

- Set includes 5 shims for precision work
- Micrograin Carbide tipped blades for longevity and precision
- Cuts smooth dados (grooves) from 1/4-Inch to 13/16-Inch
- Convenient storage box protects your blades
See more technical details

"Handy and neat" 2009-11-13
By William H. Sedgwick (Indiana)
This dado set is just right for handyman-level woodworkers. Its size allows you to change it quickly and to make adjustments after a trial run. The set comes in a neat folding case that can be hung up on the shop wall for easy retrieval. Best of all, this dado set is inexpensive, so that the amateur, occasional cabinetmaker, who doesn't do woodwork for a living can still afford to build bookshelves and other casework for friends and family.

"Decent... surprisingly decent..." 2009-08-18
By J. Sullivan (Ankeny, IA USA)
I was surprised at how well this worked.. If you've used a stacked dado set before, the setup is just as easy as any other.. chippers are solid and well marked... nice variety of shims that come with it... well written instructions... I've only used it on some 3/4in MDF and it held up very well...

"good product, great price" 2009-03-28
By S. Carpenter (Millersville, TN)
took a chance that these low priced baleds would be worth using, and they do a good job (no Freud mind you) but they are well worth the price.

the company shipped them in a timley manner and they were exactly are advertised. I would but from them again

Images Product

Buy Mibro 491071 6-Inch Stacking Dado Blade Now

MK Morse CSM1472SC Metal Devil 14-Inch 72-Tooth Steel Cutting Saw Blade with 1-Inch Arbor

2009-12-24T06:30:00.001-08:00

Buy Cheap MK Morse CSM1472SC Metal Devil 14-Inch 72-Tooth Steel Cutting Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now
The Metal Devil saw blade is the fastest, easiest, and coolest way to cut through ferrous and nonferrous metals. Metal Devil blades have hardened steel plates for durability. The blades cut cool and do not transfer heat to the inner plate, so you can pick
Readmore

Technical Details

- Cut through solid steel late in less than 12 seconds
- The unique metallurgy of the carbide tips allows minimal heat transferred to the inner plate
- Constructed with a hardened steel inner plate that has a unique combination of tungsten carbide and titanium carbide tips brazed to the teeth.
See more technical details

"MORSE is the best value " 2008-12-31
By Glenn Rosenberg (Clifton NJ)

I have used most of the blades in this size that are sold and have found over the years that the METAL DEVIL is the best VALUE for the price NEVER gets HOT! LONG LIFE GREAT CUTTING just a good blade

ROSEBUD 12/31/2008

Images Product

Buy MK Morse CSM1472SC Metal Devil 14-Inch 72-Tooth Steel Cutting Saw Blade with 1-Inch Arbor Now

Starrett Hacksaw Blades BI Metal 12" 18 Teeth 2 Piece Pack Blue

2009-12-22T21:24:00.001-08:00

Buy Cheap Starrett Hacksaw Blades BI Metal 12" 18 Teeth 2 Piece Pack Blue

Buy Low Price From Here Now
Starrett Bearcat(TM) Bi-Metal BGT Hacksaw Blades with Ground Teeth. Bearcat (BGT) blades feature precision ground high-speed steel teeth coupled with a super-efficient, aggressive Bearcat tooth design. This unique combination results in faster cutting and longer blade life. Tests have shown the blades to cut as much as 30% faster than regular bi-metal blades.Starret Hand Hacksaw Blades Blades Affixed on Carded Mount Suitable for Display, BLUESTRIPE BI-METAL Unique(TM) Ground Tooth , Hacksaw Blades (2/Card), Bluestripe, 12" 18 TPI
Readmore

Technical Details

See more technical details

Images Product

Buy Starrett Hacksaw Blades BI Metal 12" 18 Teeth 2 Piece Pack Blue Now

4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades

2009-12-21T12:08:00.001-08:00

Buy Cheap 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades

Buy Low Price From Here Now

Readmore

Technical Details

- Max Cut: 90º: 3/4"
- Blade Capacity: 4" Inch
- Motor: 0.9 amps @ 110V 60Hz, 4500RPM
- Table: 7-1/2" x 5 -1/2 x 6-1/2
- Content: Table Saw, 1 x 4" 24 tooth Carbide Tip Blade & 1 x 4" Diamond Blade
See more technical details

"Best little tool I own" 2009-07-22
By Elaine Killingsworth (Andalusia, AL)
This the is best little tool I own. It is easy to use for my small crafting cutting needs. You can't go wrong with this for your small wood cutting projects.

"This saw is JUNK" 2009-05-27
By William E. Gillmore
This product arrived with a wobble on the saw blade. I decided to try the other blade and see if it wobbled. I soon found out that to change the saw blade you have to disassemble the saw. To change the blade you must remove the motor as well as the safety ground, essentially every screw on the machine must be removed. Be sure the unit is unplugged as it is easy to trip the power switch, which now has the ground removed and the motor detached from the cast mount with a sort of sharp carbide blade attached. Removed the nuts to get the blade off requires two very large metric wrenches. When the saw is to be reassembled the blade must be realigned or it will cut at an angle. There is no facility for doing this except by trial and error. While doing that you will no doubt gouge the blade into the cast iron blade guard as there is almost no clearance between the blade and the cast mount.

Having discovered all that I mounted the second diamond tip blade. It wobbled too. Further investigation showed that the motor shaft was bent.

After all that there is more bad news. The saw has near zero adjustment in blade height. The adjustment is by set screw and has no method to slightly adjust, it just moves any way it wants. The saw is also noisy and rattles badly.

I regret the day I ever bought this saw. It is an unmitigated piece of [...].

"You are better off at h\Harbor Freight" 2009-04-09
By Harry Kruz (Gainesville, Florida)
At this price point, you are much better off with the

"Disappointed" 2008-12-13
By B. E. Leissner (Texas)
I should have paid more attention to the describtion. This is too dangerous to be a toy and to little to be anything but a toy. Do Not buy this

"Needs improvement" 2008-10-26
By Clayton Schwartz (Quincy, Pa. United States)
A great idea for small work, but designed poorly. High speed, but no power. Even cutting 1/4" plywood bogs it down. Blade is not true enough to do fine work. The built in blade cover prevents cutting long pieces. They will not clear the bracket for the cover. Such a great idea if designed properly.

Images Product

Buy 4" Mini Table Saw Hobby Crafts 4500RPM w/ 2 Blades Now

LENOX 20352-GOLD100D Titanium Edge Utility Knife Blade - 100 Pack in Dispenser

2009-12-20T03:17:00.001-08:00

Buy Cheap LENOX 20352-GOLD100D Titanium Edge Utility Knife Blade - 100 Pack in Dispenser

Buy Low Price From Here Now
Lenox GOLD BLADES High speed edge with titanium coating Bi-metal, shatter resistant construction Four notch system makes deeper cuts Cuts the toughest materials Fit all standard utility knives
Readmore

Technical Details

- Lasts Longer
- Shatter resistant
- Makes deeper cuts
- Cuts the toughest materials
- Fits in all standard utility knives
See more technical details

"Blades of Choice" 2009-04-06
By S. Crane (Tinley Park, IL)
I use these blades for ceiling tile or drywall only since they are a little expensive. They don't last forever, but they surely last longer than the competition.

"Great Blades" 2008-10-03
By Arlene Pepera (Cleveland, Ohio)
These blades are excellent, and they keep sharp much longer than the old type blades. I think they are worth the extra cost for the quality you get.

"The best knife blades PERIOD" 2007-02-21
By Super Freak (Kansas, USA)
I do construction for a living. I've remodeled whole houses as well as hung and finished drywall for 13 years. I've been using these blades for a couple years now. They are the most durable knife blades I've ever had! Before I used the Lenox Gold blades I was using standard Stanly blades for my drywall work. The switch was a little painful at first because of the price difference but the first time I used a Gold blade took all the pain away. It's like comparing apples to oranges. At the moment I am hanging drywall for a living and these blades will last me a whole house of hanging before I even have to turn the blade over!

These deserve 10 stars and I recommend that everyone who has need for a strong, sturdy knife blade buy these!

Images Product

Buy LENOX 20352-GOLD100D Titanium Edge Utility Knife Blade - 100 Pack in Dispenser Now

DEWALT DW4892 Reciprocating Saw Blade Set with Case, 12-Piece

2009-12-18T18:39:00.001-08:00

Buy Cheap DEWALT DW4892 Reciprocating Saw Blade Set with Case, 12-Piece

Buy Low Price From Here Now
The DeWalt DW4892 12-piece Reciprocating Saw Blade Set With Case provides a wide selection of blades for many common applications. The included case expands to hold 9-inch blades and is designed to fit in DeWalt power tool kit boxes for easy blade storage. This set includes three DW4802 6-inch 6-TPI woodcutting blades, two DW4811 6-inch 18-TPI metal cutting blades, three DW4809 8-inch 14-TPI metal cutting blades, three DW4803 9-inch 6-TPI woodcutting blades, and one DW4865 9-inch 10-TPI demolition blade.
Readmore

Technical Details

- 12-piece Reciprocating Saw Blade Set
- Wide selection of blades for many common applications
- Included case expands to hold 9-Inch blades
- Case fits in DeWalt power tool kit boxes for easy blade storage
- Included blades: three DW4802 6-Inch 6-TPI woodcutting blades, two DW4811 6-Inch 18-TPI metal cutting blades, three DW4809 8-Inch 14-TPI metal cutting blades, three DW4803 9-Inch 6-TPI woodcutting blades, and one DW4865 9-Inch 10-TPI demolition blade
See more technical details

"Saw Blades" 2009-01-27
By David A. Forbes
I was VERY happy with this. The storage container fit's nicely in

my saw case. And the price was the cheapest I found.

"Decent set but nothing special." 2008-11-19
By Yeormom (Atlanta, Georgia)
The included case is great for storage but not as useful as I had hoped it would be, as I cannot see what size blades I have remaining as well as removing a single blade on the fly takes a little bit more care than I would have hoped.

I would recommend purchasing blades that are black in color, as after first use, the yellow coating is instantly wiped off making the blades look more used than they actually are.

"Dewalt Saw Blades" 2008-08-13
By Montauk Nomad
Typical Dewalt quality product. I was disapointed to later find another Dewalt saw blade set with more blades at a cheaper price which did not come up when I did my original search.

"Quality blades, and the case is a nice feature" 2007-05-06
By William Taber (Indianapolis)
I purchased this set of blades for use with my Milwaukee Sawzall and am very happy with my purchase. I am able to keep the case full of blades in my Sawzall tool case and keep everything neat and tidy. The large demolition blade did wonders for my first demolition job with it. The price is quite reasonable, especially when compared to trying to put together this selection of blades from single purchases.

Images Product

Buy DEWALT DW4892 Reciprocating Saw Blade Set with Case, 12-Piece Now

DeWalt DW3232PT Precision Trim 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor and Tough Coat Finish

2009-12-17T10:38:00.001-08:00

Buy Cheap DeWalt DW3232PT Precision Trim 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor and Tough Coat Finish

Buy Low Price From Here Now
DEWALT's 12-Inch Precision Trim Crosscutting Blade features extra-strong micro-fiber carbide teeth that stay sharp and reduce splintering. This crosscutting blade also features dampening slots around the body to help reduce vibration and increase accuracy, and a tough-coat body finish that resists heat, gumming and friction to ensure a longer blade life and consistently cleaner cuts.
Readmore

Technical Details

- 12-inch 80-tooth crosscutting blade with micro-fiber carbide teeth that stay sharp and produce cleaner cuts with less splintering
- Dampening slots around the body lessen the amount of vibration for better accuracy
- Tough-coat body finish resists heat to lessen the tendency for gumming and friction
- Tough Coat Finish reduces heat, friction, and gum to promote blade life
See more technical details

"It's a good saw blade." 2008-05-26
By Crit_Zer0 (Dallas, Texas United States)
It fits on the saw.

It cuts cleanly through wood.

It's lasted through 4 years of home remodeling projects.

Couldn't expect anything more.

Images Product

Buy DeWalt DW3232PT Precision Trim 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor and Tough Coat Finish Now

Shark Corp 01-2440 Replacement Blade For 10-2440 Shark Saw

2009-12-16T06:05:00.001-08:00

Buy Cheap Shark Corp 01-2440 Replacement Blade For 10-2440 Shark Saw

Buy Low Price From Here Now
9-1/2" replacement blade. Replacement blade for pull stroke handsaw, model No. 10-2440. 9-1/2".
Readmore

Technical Details

- Cross cut teeth (17 per inch) to work across the wood grain, and rip teeth (9 per inch) to cut with the grain
- Although the blade is very flexible, it cuts exceptionally straight
- Designed for applications where precision outweighs speed
- Recommended for all sizes of plywood, particle board and melamine
- Cuts through flat foam sheets; moldings of all sizes and widths at all angles
See more technical details

"shark saw sharp and flexible" 2009-04-20
By Cdavid Rogers (Willow Grove, PA)
The blade is good for fine cutting. I like the fine tooth side of the blade. The side with the larger teeth is very hard to control. I wish they made a replacement blade with both sides with fine teeth.

"Never disappoints!" 2009-02-25
By Cable (Missouri)
I've been using Shark Saws on a frequent basis for 5-6 years. They just WORK. I use them most as jamb saws, but have also pressed them into use for long rips on Southern pine decking (long story short- I once had to rip cut a 12 foot long 5/4 deck plank and had no access to electricity or battery powered tools). Worked up a sweat, but the coarse tooth side of that Shark Saw did the job like no push saw could have. In the course of trimming jambs, I've cut through many finish nails with the fine tooth side and still have a functional saw. They are a fantastic, durable tool. I recommend them without any reservations.

"Save Money - Just replace the blade" 2008-09-09
By KL (VA)
These pull saws are the best! I often use them instead of a power saw, especially when accuracy is important. They cut much faster and waste much less material than most hand or power saws. Sadly, none of the stores around here stock the replacement blades. These are exact replacement blades that fit my handle perfectly.

"Firstclass saw, works where others don't" 2008-08-13
By Mark Burdette (Little Rock, AR United States)
Great saw. I love it and use it more than any other saw I own.

I have to buy a replacement blade only because I've used this SO much.

HIGHLY recommended. If I could own only one hand saw, this would be the one.

"Useful little bugger" 2008-04-07
By Huck (Bakersfield California)
Very sharp, handy little saw. Cuts on the pull stroke, so be careful - the last cut can be a doozey when the blade breaks through and is comin' at ya! Sharp little sucker. Sometimes you just don't want to grab the bigger power saw when all you have is a couple of cuts, and this one is quick and accurate. Don't hit any nails, 'tho, or you'll be buying a new blade sooner than later! (don't ask me how I know that!)

Images Product

Buy Shark Corp 01-2440 Replacement Blade For 10-2440 Shark Saw Now

Robert Larson 540-7500 Coping Saw Blades for Wood

2009-12-16T03:09:00.001-08:00

Buy Cheap Robert Larson 540-7500 Coping Saw Blades for Wood

Buy Low Price From Here Now
High quality coping saw blades with pinned ends. Fits most coping saws old or new.
Readmore

Technical Details

- Pack of 12 blades
- Quality blades from Germany
- For cutting wood
See more technical details

"What was I thinking?" 2008-11-10
By Dr. Nick (Springfield)
I purchased the Larson coping saw and also a set of 5 blades at the same time. I can't imagine how many cuts I thought I would be making - I use a coping saw only for molding/trim work, and only for some inside corners. The blade that came with the saw will probably last a couple years of occassional use considering how well it has performed so far.

"High Quality Replacement Blades For Your Coping Saw" 2008-09-23
By Leebo (USA)
I have the Robert Larson coping saw and I purchased these replacement blades for it. The saw and the blades are high quality and I can recommend them completely. These German blades last a long time and cut and cope cleanly with very little tear out even in soft woods. They turn on a pretty tight radius. I am very happy with them after having owned inferior quality saws.

Images Product

Buy Robert Larson 540-7500 Coping Saw Blades for Wood Now

44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws

2009-12-14T19:50:00.001-08:00

Technical Details

- Box of 3
See more technical details

Images Product

Buy 44 7/8" x 1/2" X.023" x 10/14 Th. Portable B/s Blade (433-80114) Category: Band Saws Now

MAKITA USA INC #792540-9 5PK #71 Recip Blade

2009-12-13T12:47:00.001-08:00

Buy Cheap MAKITA USA INC #792540-9 5PK #71 Recip Blade

Buy Low Price From Here Now
3-15/16" #71 Metalcutting, Extra Fine Reciprocating Saw Blade For Use With Models 4390D/DW For Mild Steel, Plywood, Masonite, Plastic & Formica, 5 Pack.
Readmore

Technical Details

- MAKITA USA INC #792540-9 5PK #71 Recip Blade
- MAKITA USA INC
See more technical details

"Limited use but efficient" 2009-10-18
By 1/2 Canadian
This blade has only one application, as far as I know, since the only machine it's designed for is Makita's cordless reciprocating saw. But it works great, allowing you to take the saw anywhere the job may require, and quickly cut through just about any metal, as long as you can get the saw into position correctly, and keep the base of the blade tight to the material. That's true with most reciprocating saws, of course, and lax attention to that rule is what finally snapped off my 15 year old blade at both the tip and the base at once, prompting my order of this 5-pack, which will probably last longer than me.

The portability of this cutting power is much used and appreciated at my house.

Images Product

Buy MAKITA USA INC #792540-9 5PK #71 Recip Blade Now

DEWALT DW3975-10 12-Inch 18 TPI Hack Saw Blade (10-Pack)

2009-12-12T06:04:00.001-08:00

Buy Cheap DEWALT DW3975-10 12-Inch 18 TPI Hack Saw Blade (10-Pack)

Buy Low Price From Here Now
The DEWALT DW3975-10 12-inch, 18 teeth per-inch (TPI) hack saw blade pack features 10 finely crafted, tough hack saw blades with high speed steel teeth and high carbon steel backer for added flexibility. This innovative blade sports an anti-stick coating for reduced friction and cleaner cuts. The Rc 64-66 tooth hardness increases wear resistance, and the Raker and Wavy tooth design is optimized for a variety of applications including PVC, rod, pipe, strut, conduit, wood, and more.
Readmore

Technical Details

- 12-inch blade with high speed steel teeth
- Anti-stick coating for easier cuts and reduced friction
- Rc 64-66 tooth hardness reduces wear and tear; 18 TPI for clean cuts
- Tooth design optimized for many applications (Raker and Wavy)
- DW3975-10 includes 10 blades
See more technical details

"Good general purpose blade" 2007-12-16
By Sean P. Logue (Research Triangle Park, NC USA)
I bought a pack of these to go with a new Dewalt hacksaw frame. They fit and work well, are easy to spot when dropped (thanks to the bright yellow paint job), and are reasonably priced. I also found this model (18 TPI) to be a good choice for general use.

"High quality hack saw blades" 2007-03-30
By Henrik Morten Kerrn (Denmark)
They are very strong and efficient. For me they represent an excellent buy.

Images Product

Buy DEWALT DW3975-10 12-Inch 18 TPI Hack Saw Blade (10-Pack) Now

DeWalt DW7747 14-Inch 72 Tooth Heavy Gauge Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

2009-12-11T02:47:00.001-08:00

Buy Cheap DeWalt DW7747 14-Inch 72 Tooth Heavy Gauge Ferrous Metal Cutting Saw Blade with 1-Inch Arbor

Buy Low Price From Here Now
Outfit your DW872 Multi-Cutter Saw for tough metal work applications with this heavy-gauge DeWalt DW7747 14-Inch Ferrous Saw Blade featuring a 1-inch arbor. This 72-tooth blade is capable of making an average of 1,200 cuts in most materials, and it is designed to let you resharpen the teeth for improved cutting and a longer life. It is crafted with 12-percent titanium carbide and features expansion slots that dissipate heat. Plus it offers a tri-foil braze that increases the strength of each tooth's tip for exceptional durability, while a modified triple chip tooth grind helps ensure clean, burr-free cuts for beautiful finished projects. This saw blade is backed by a 1-year warranty
Readmore

Technical Details

- 12-percent titanium carbide for a long-life and dependability cutting metal
- Expansion slots dissipate heat and tri-foil blaze strengthens teeth for durability
- Resharpenable teeth feature a modified triple chip grind for clean, burr-free cuts
- 14-inch diameter; 72 teeth; averages 1,200 cuts through most materials
- Backed by a 1-year warranty
See more technical details

"DeWalt Metal Cutting Blades" 2009-04-17
By Demetrius Barmettler (Sacramento, CA, USA)
I don't know how we got along before these blades and slow speed cut saws were invented, but if you're still using abrasive blades, you don't know what you're missing!

"as good as the people who use it." 2009-02-05
By Christopher Beyries
I have purchased many of these and agree that this is the best price. We use these in our shop all the time and they are fabulous. A few words of warning. Anyone not experienced with this type of cutting should not try it with this blade. I discovered a few weeks ago that our blade has missing teeth from overuse, overheating and inexperienced workers. Be careful cut slow and the blade will do it's job well. Rush or don't follow directions exactly and you will cost yourself alot of time and money. I recommend these blades to everyone doing this type of work. They greatly reduce the amount of grinding / cleaning required.

"quality blade" 2008-10-06
By M. Moore (Gurnee, IL)
We have purchased over 20 of these blades through Amazon. This item is used frequently in our shop. This is by far the most competitive price I have been able to find for this item.

"Change not good" 2008-09-21
By W. Thelander (Sonora, CA)
I have purchased at least six Dewalt blades in the past and have been very happy, they cut good and I could have them sharpened a nmber of times which helps cut down on the cost. The problem I have is that the "NEW" tooth design can only be resharpened 1 or 2 times which does not help with the overall cost. I intent to send my latest order back and look for a better blade with more carbide.

"new broom" 2007-11-04
By Sureslow (No. Ca.)
The new DeWalt blade is like a new broom, it will gives you a clean sweep !!

Images Product

Buy DeWalt DW7747 14-Inch 72 Tooth Heavy Gauge Ferrous Metal Cutting Saw Blade with 1-Inch Arbor Now

Makita 792615-4 Reciprocating Blade

2009-12-11T00:50:00.001-08:00

Buy Cheap Makita 792615-4 Reciprocating Blade

Buy Low Price From Here Now
For use with Model No. 4390D and 4390DW cordless reciprocating saw. 5 blades per card. No. 792540 9: 24TPI, for mild steel, plywood, masonite, plastics and formica; overall length: 3 15 16" No. 792615 4: 24TPI, for mild steel, plywood, masonite, plastics
Readmore

Technical Details

- Pack of 5
See more technical details

Images Product

Buy Makita 792615-4 Reciprocating Blade Now

Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor

2009-12-10T22:27:00.001-08:00

Buy Cheap Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- Super Thin Kerf for Fast Cuts
- Professional Grade Carbide
- Aggressive Hook Angle
- Anti-Kickback Tooth Design
- Fits: Porter-Cable
See more technical details

"Tried it and it's a mistake" 2009-08-21
By Builtmany (Scotch Plains, NJ United States)
Used on a Porter Cable Saw Boss this 6" blade is the worst I have had on my saw. I thought I would save a few bucks but after 2 cuts it came off so it's money wasted. Horrible & slow rough cuts on 2x4's and plywood both so it's really worthless to me. Spend a few $$ more and enjoy your saw and what it should be like.

Images Product

Buy Oshlun SBW-060024 6-Inch 24 Tooth ATB General Purpose and Trimming Saw Blade with 1/2-Inch Arbor Now

Freud D0860S Diablo 8-1/2-Inch 60 Tooth Fine Finishing Miter Saw Blade with 5/8-Inch Arbor

2009-12-10T11:18:00.001-08:00

Buy Cheap Freud D0860S Diablo 8-1/2-Inch 60 Tooth Fine Finishing Miter Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
8-1/2" x 60 Tooth, Diablo Slide Compound Miter Blade, Red Perma Shield Coating, Stabilizer Vents, Carbide Tipped, Thin Kerf Design.
Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
- Tri-Metal Brazing for impact-resistant tips
See more technical details

"Glass smooth cuts in maple" 2009-10-07
By W. B. Halper (Saratoga, CA)
I've just finished cutting quite a few maple boards using my Hitachi C8FSE 8-1/2-Inch Sliding Compound Miter Saw. The cut surface was absolutely smooth with virtually no chipping on the edges. I've had similar results cutting through oak and other hardwood.

I've also used this blade (although a different one) to cut through 1/8" aluminum and 1/16" brass stock. It's not a recommended use, as the hook angle of the teeth is wrong, but it worked and the cuts were smooth. (If you need to do a lot of metal cutting, you should invest in a blade specifically designed for that purpose - CMT 225.060.08 8-1/2" x 60 Tooth, .122 Kerf, 5/8" Bore Non-Ferrous Metal, PVC & Melamine Cutting Miter Saw Blade) or the Hitachi 998864 8-1/2-Inch 60 Tooth Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

"Perfect Value, Fine Performance" 2009-02-03
By B. P. Murphy (McLean, VA USA)
This blade is an excellent value according to any criteria you might apply. It is exceedingly sharp, remarkably quiet and wobble free. It is the exact size required for my Dewalt sliding arm compound miter saw. The blade is decidedly better than any option available from the saw manufacturer. It is also a much better value than the so-called premium blades at better than twice the price. It is even cheaper to buy online with free shipping than it is to purchase it at the local mass market home improvement store. I have used miter saws for both hobby and professional applications for more than 20 years, especially for high end custom hardwood trimwork, and this is the very best blade I have used.

"Superb where others failed...." 2007-12-29
By Kevin Mcdermott (Essex County, Massachusetts)
I bought this blade as a last-chance hope to use on a 1950s vintage combination machine tool, the ShopSmith 10er. The saw function is admitted to be the most compromised of the various options, and the tool is powered by its original 1/2HP motor. Other saw blades...even new ones...failed to cut through 1/4 stock without binding and gave a lousy cut to boot. I had pretty much decided to not use the 10er as a saw at all...but then this blade arrived. It whipped through 2x4s without blinking and gave a cut that was razor-clean besides. Highest recommendation!

"An excellent blade." 2007-05-16
By Amateur woodworker (Western Washington)
I have used this and other Freud blades, and have found them to be of consistently high quality, giving excellent cut quality. For my needs as a hobbyist/homeowner they are an ideal choice. Will gladly buy another if and when I wear this one out.

"Smooth, clean cuts" 2005-08-05
By Steven Horii (Philadelphia, PA USA)
I used this blade with a DeWalt 8.5-inch sliding compound miter saw on my recent flooring project. I was putting down a laminate/composite floor. The recommendation of the flooring manufacturer was for a carbide blade with a lot of teeth (60 on a 10-inch blade). I had to cut many angles because of the shape of the room and the saw/blade worked very well. Cut surfaces were very smooth - almost like they were planed. No chipping of the laminate surface, except to a very minor degree when I had to plunge the blade because the angle put the start of the cut right at the edge of the material.

I also used a laser guide with this blade. The laser guide is reliably at the left edge of the kerf, so you can get very close to the exact cut location you want.

The cutting noise is a bit lower than carbide blades with fewer teeth.

No complaints - the blade works as advertised. I also have a 7.25" Freud carbide blade on my circular saw (a Milwaukee) and it works well. This is one reason I decided on the Freud for the DeWalt saw.

Images Product

Buy Freud D0860S Diablo 8-1/2-Inch 60 Tooth Fine Finishing Miter Saw Blade with 5/8-Inch Arbor Now

Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating

2009-12-08T21:42:00.001-08:00

Buy Cheap Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Buy Low Price From Here Now
Thin kerf circular saw blade is designed to give glass-smooth finishes when crosscutting hard and soft woods. Alternate top bevel, 7,000 maximum RPM, .098 plate, .116" kerf, +10 degree hook.
Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Unique side grind polishes the material to produce a superior finish
- Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
- Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
See more technical details

"Great Blade" 2009-11-30
By Bruce (Utah)
This blade is great in my Makita sliding miter saw. Like so many others have reviewed, cuts are true and smooth. Rarely need sanding if I cut the length correctly. This is a AAA class blade, and I like being able to sharpen several times. Good value for the money if you want/need a top grade blade. I also use a few Tenryu Gold Medal blades in my other saws, and both Freud and Tenryu work great. I need my tools to be better than I am, and these blades do that.

"Finish cuts" 2009-04-27
By David Dalzell (Sierra Nevada Mtns, CA)
I mostly make small boxes and jewelery boxes. With the 80 tooth Freud blade the miter and other joinery cuts I make are glue up ready and have no tearout. This is the best blade I have for fine joinery.

"good for the right job" 2009-01-01
By S. Shaw (Indy, IN)
I gave it 4 stars because it is an O.K. blade. I bought it for cutting 3/4" oak plywood (table saw). I was happy with the results, but not impressed. It worked well with other types of wood. Would I buy again? Only if I had to, due to choices available at that time. Price should be $69.99 for what you get.

"Its Good" 2008-05-22
By Hard Maple (Emmett, ID USA)
Super smooth cuts. But you can't really chop cut with the blade. You have to take a few extra miliseconds than you would with a 60 tooth, but you make that up in sanding and/or gluing time since the cut is now at about a 150-grit finish anyway. It seems to run quieter than the blade I replaced (can't recall the brand or model since its been on so long). And it fits snuggly on my 5/8" arbor, no play. All-in-all I find it an excellent blade for my second most important saw (my table saw has a Woodworker II).

"use full kerf for cross cutting finish work" 2007-11-06
By Benjamin W. Stenzel (minneapolis)
I am thrilled with this saw blade. I have a 12 in for my mitre saw and a 10 in for my table saw. I only use them for cross cutting finish work. When the work is feed in to the blade slow the blade causes less tear out on the back side of the board than any other blade i have used. I have not been happy with other Freud blades. I ended up using them for rough cutting. But these are worth the money.

Images Product

Buy Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating Now

Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

2009-12-07T07:32:00.001-08:00

Buy Cheap Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
For radial saws and table saws. These all purpose blades give scratch-free polished cuts on wood. Crosscut up to 2" thick. Rip up to 1" thick. They have a 30 DEG alternate top bevel with a 5 DEG face hook on 10" diameters and smaller. (On 12" diameters and larger 20 DEG ATB). They are also made with double-hard and 40% stronger #C4 carbide. Thin kerf design saves 1/3 wood loss on each cut, feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. With the new 30 DEG ATB tooth style, this blade stops splintering on ply veneers on both radial saws and table saws.
Readmore

Technical Details

"the best blade hands down..." 2009-03-22
By John Rush (wash,dc)
forrest makes a great saw blade, and they stand behind it 100%... they also resharpen the blades when they inevitably get dull, and they come back as good as new, you cannot find a better product, anywhere... buy both the ripping and crosscut, and use them appropriately, and you will be glad you did....

"Not always great." 2008-06-27
By Professional Woodworker (san francisco)
I have been a huge fan of Forrest blades, using them almost exclusively, but when I bought a second Woodworker I so I would have something to use while the other one is being sharpenned, I was greatly disappointed with what I received. The center bore was tighter than normal and all the cuts burned. I may be willing to pay twice the price for the quality, but the company better work twice as hard on quality control.

Amazon sent me a replacement, which I haven't tried yet, but I hope this isn't a sign that Forrest has gotten too big for itself. I'll jump ship if this happens again.

"Great blade" 2007-02-13
By Woodworker (Georgetown Texas)
This is the highest quality blade I have used in 20 plus years of woodwork.

"The Best" 2006-10-05
By Malgorzata E. Zaluska (New York)
This is quality. The blade works like a hot knife to butter, enhances the cutting power of your machine. Freud nor Amana come close to this. It is pricey; double what a Freud blade would cost. Though you can send this back to the manufacturer for a resharpening at a smaller cost than a new blade.

"Dick Nelson, Palatka Florida" 2003-04-12
By Richard L. Nelson (Palatka, Fl USA)
I have had this blade for a year and a half..I can say that it is the best of the best. I now will have to have it resharpened, my fault,I did not scan first, cutting some "old salvaged" 2 x 4 and just happened to get into some dry wall screws. Believe it ! it still give an ok cut but I want it better..I would buy another in a second if needed.

Images Product

Buy Forrest WW10607100 Woodworker I 10-Inch 60 Tooth ATB Saw Blade with 5/8-Inch Arbor Now

Fein 6-35-02-106-07-0 Segment Blade-FMM 250, 2-Pack

2009-12-03T23:24:00.001-08:00

Buy Cheap Fein 6-35-02-106-07-0 Segment Blade-FMM 250, 2-Pack

Buy Low Price From Here Now
Includes MultiMaster 3-1/8" HSS Saw Blades (2pk) - 63502106070
Readmore

Technical Details

- Segmented saw blade
- For cutting
- 2-Pack
See more technical details

Images Product

Buy Fein 6-35-02-106-07-0 Segment Blade-FMM 250, 2-Pack Now

Milwaukee 48-00-5027 The AX 12-Inch, 5/8 TPI Super Sawzall Blade, 5-Pack

2009-12-03T13:51:00.001-08:00

Buy Cheap Milwaukee 48-00-5027 The AX 12-Inch, 5/8 TPI Super Sawzall Blade, 5-Pack

Buy Low Price From Here Now
5 Pack Heavy Duty Ax Blade For Sawzall, 5/8 Teeth Per Inch, 12" Long, 24% Thicker Than Normal Plunge Cutting Blades.
Readmore

Technical Details

- Extra long reciprocating saw blades ideal for heavy demolition work
- Unique heat-treating process hardens the blade for incredible durability
- Blades are .062 inches thick and 9 inches in length
- 1/2-inch tang fits all Sawzalls
- 5-pack; 5-year limited manufacturer's warranty
See more technical details

"Milwaukee Tools the best there is at this price." 2009-09-07
By S. Howes (USA)
I own a large selection of Milwaukee tools and a few Hilti tools. IMO, getting Milwaukee products are like getting Hilti products for a little less money. However, if you work in punishing, demanding conditions everyday, all day, then Hilti may be the way to go for the very long haul. For 90%, Milwaukee is a good bet

"Cut wood and nails like butter" 2009-07-14
By Michael Newlon (CA, USA)
Love these blades. Sawzalls are usually used in spots where other saws that will cut straighter and smoother can't reach. Because of this you don't want to spend all day in this awkward spot. I have never been so pleased with my saw using these blades. They last longer and cut so well that it's like using a completely different saw. I just installed a larger window in an existing wall. I cut through several studs with nails on a wall attached to plywood. Each stud took less than a minute, I cut straight and left the plywood undamaged. Buy these blades!

"Best blade ever for construction demolition and rough work" 2009-05-19
By jj (CA USA)
This thing cuts like crazy. In my Milwaukee Sawsall I can cut through studs, drywall, nails wires pipes everything and for a long time. Very good stuff here.

"Fantastic Demo Blades!" 2009-04-28
By MilesToGo
I've been using these blades for around 5 years. These are fantastic, durable demo blades. They will chew through wood or steel. Unlike a previous reviwer, I find these blades are very easy to do plunge cuts with. They won't bend if you run the tip into something (unlike most similar blades). While doing residential demo work, I have litterally plunge cut into a wall and cut through the entire wall..removing it in a single piece. The only thing they won't cut is masonry/stone.

I can't say enough good about these blades. They have saved me lots of time and many headaches.

"Stump remover blades! (can't cut rocks though)" 2009-02-04
By G. Powell (Seattle, WA USA)
I bought a package of these blades to use to help cut the roots on a stump of a tree in my yard. The good news is that the stump is out. The bad it took 2 blades to do the trick. Ice hardened or not, the blades don't cut rocks. The teeth are still there but they are not sharp. These blades have a 5 year warranty, but I don't see how they'd last that long... Back to my story, when I hit a small rock, sparks flew, dirt spewed, roots still cut though.

Anyway I have a 12amp sawzall with a variable speed orbital cut (1 + 1/8th) and the sawzall was up to the job. Given these blades, there is not much that will stop you.

The nice thing is that these blades did not bend, or bind. If you are pruning, I'd go for the pruning blades though rather than these. And they are a little big on the tip & long for a plunge cut into a 2x4 without drilling a hole to start.

Images Product

Buy Milwaukee 48-00-5027 The AX 12-Inch, 5/8 TPI Super Sawzall Blade, 5-Pack Now

Freud D0840X Diablo 8-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch Arbor

2009-12-02T23:07:00.001-08:00

Buy Cheap Freud D0840X Diablo 8-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
8" - 8-1/4" x 40 Tooth, Diablo Finish Blade, Red Perma Shield Coating, Stabilizer Vents, Carbide Tipped, Thin Kerf Design.
Readmore

Technical Details

- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
- Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
See more technical details

"Freud Diablo Saw Blade" 2008-01-12
By Ware Lantz (Seattle)
This is a very versatile, smooth cutting blade. I have used the same blade before and like it very much.

This blade at $28.86 is identical to the TKR304 blade listed elsewhere by Amazon at $32.99. They are both manufactured in Italy, perhaps at different times.

Images Product

Buy Freud D0840X Diablo 8-1/4-Inch 40 Tooth ATB Finishing Saw Blade with 5/8-Inch Arbor Now

Delta 28-567 16-Inch Band Saw Blade 82-Inch x 1/4-Inch, 6 Teeth per Inch

2009-12-01T16:55:00.001-08:00

Buy Cheap Delta 28-567 16-Inch Band Saw Blade 82-Inch x 1/4-Inch, 6 Teeth per Inch

Buy Low Price From Here Now

Readmore

Technical Details

See more technical details

"Very rough cuts" 2001-12-28
By Kevin Coleman (Orinda, CA USA)
I bought this blade to run in my Jet 12 inch band saw. I am fairly certain I have it set up properly and it cuts very poorly. The offsets on each teeth are very large and thus it leaves an extremely rough cut on any wood unless you feed the wood at a very slow rate and thus burn it. The roughness is so bad you cant even sand it out so I dont recommend this blade at all

Images Product

Buy Delta 28-567 16-Inch Band Saw Blade 82-Inch x 1/4-Inch, 6 Teeth per Inch Now

BOSCH T118EF 3" 18 TPI Bi-Metal Bosch Shank Jigsaw Blade 5 Pack

2009-12-01T16:52:00.001-08:00

Buy Cheap BOSCH T118EF 3" 18 TPI Bi-Metal Bosch Shank Jigsaw Blade 5 Pack

Buy Low Price From Here Now
Features Bosch style Tang shank, (T shank). Eliminates set screw mounting hole, which is most common breaking point on Universal Mounting jigsaw blades. Packed 5 blades per card. No. T101B: Wood cutting, 4" long, 10 TPI, for straight fine cuts No. T101BR:
Readmore

Technical Details

- Bosch's break resistant and durable in metal blade.
- Application: Cuts thin metals 5/64" - 7/32" (ferrous and non-ferrous)
- Benefits: Makes straight cuts and has a long life.
- TPI: 18
- Overall Length: 3-5/8"
See more technical details

Images Product

Buy BOSCH T118EF 3" 18 TPI Bi-Metal Bosch Shank Jigsaw Blade 5 Pack Now

Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor

2009-12-01T16:50:00.001-08:00

Buy Cheap Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now
Kerf: .096". Plate: .071". Carbide Grade: C3 micrograin. Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw. Lubricants are recommended when used for this application. Good for woodworking and cutting plastics. Tungsten carbide triple-chip grind produces clean cuts.
Readmore

Technical Details

- Circular saw blade ideal for cutting wood and plastics
- Triple chip design perfect for use on brass, aluminum, copper, and other light metals
- 72 long-lasting tungsten carbide teeth
- 5/8-inch arbor fits most 10-inch miter saws
- 10-inch diameter; 5-year limited warranty
See more technical details

"Two blades in one!" 2009-06-09
By V. Ellisor (Austin, TX)
This is an excellent blade for aluminum and plastics. It produces exceptionally smooth cuts in extruded and bar stock, and chip and heat free cuts in 1/2 inch Lucite. An excellent value.

"High Quality at a fair price" 2008-07-05
By Ben Franklin (Liberty,PA USA)
Used to cut a number of aluminum tubes, cuts with minimum effort. Holds up to weekly use on extrusions, why pay more?

"Hitachi Blade" 2008-04-05
By Carol Eve Streator
We are very pleased with the Hitachi blade.

A very reasonable price as well!!

"Clean Cuts" 2007-10-30
By Miller Craine (Chicago, IL)
Using a sliding miter saw, I cut an aluminum extrusion with a rolled up door screen inside. This blade cut cleanly through the assembly.

Images Product

Buy Hitachi 974642N 10-Inch 72 Tooth TCG Non-Ferrous Metal and Plastic Cutting Miter Saw Blade with 5/8-Inch Arbor Now

Freud SBOX8 Box Joint Cutter Set, Cuts 1/4-Inch and 3/8-Inch grooves.

2009-12-01T15:36:00.001-08:00

Buy Cheap Freud SBOX8 Box Joint Cutter Set, Cuts 1/4-Inch and 3/8-Inch grooves.

Buy Low Price From Here Now
For creating perfectly square flat-bottom box joints, the Freud SBOX8 Box Joint Cutter Set is your answer. This set cuts 1/4-inch and 3/8-inch grooves quickly and precisely and simplifies your work by eliminating the need for shims and adjustments. Use it with any table saw to construct strong, accurate box joints in a wide range of materials, from hardwoods to laminates.

Fit for table saws, this set speeds up joint cutting by eliminating the need for shims and adjustments.

Strong, Precise Box Joints in Minutes
The SBOX8 makes box-joint construction fast and simple for professional cabinetmakers and weekend woodworkers alike. This joint-cutter set, which features two eight-inch, 20-tooth blades with 5/8-inch arbors, is designed to help you achieve accurate box joints every time. By simply attaching this set's blades to a table saw, you can produce perfectly square cuts, so joints fit securely together for a flush, strong hold.

With this method, you'll eliminate the need for dado sets or saw blades, which often require shims and adjustments. The result is an attractive finished workpiece and quick job turnaround.

MicroGrain Carbide Tips for Long-Lasting Performance
So you can get maximum performance out of this set, the blade components are constructed with Freud's TiCo Hi-Density Carbide. This means the blades can withstand numerous sharpenings and still retain their precision. And a Tri-metal Brazing process gives the blades impact resistance, so they last for the long term without dulling (a condition that can cause torn wood and uneven cuts).

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing its own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud SBOX8 Box Joint Cutter Set, including two eight-inch blades (with 5/8-inch arbors).

Readmore

Technical Details

- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Silver I.C.E.coating resist corrosion and resin build-up and have 2 times more heat resistance and life than polished blades
- Use on all table saws for cutting grooves to create box joints in hardwoods and softwoods
- Set includes two 8" blades with 5/8" arbors and instructions for making box joints and building a box joint jig.
- Caution: Carbide tips should never come into contact with each other. Always use both outer blades
See more technical details

"Freud Box Joint Cutter Set" 2009-07-30
By Ronald M. Jackson (NE Texas)
As expected with Freud products, the box joint cutter did not disappoint me. Great tool, simple to use and once the jig is tuned, it performs to perfection. No real surprise here.

"Freud SBOX8 box joint cutter" 2009-06-07
By Marden L. Tegtmann (Omaha NE)
The box joint cutter is a high quality tool and appears to have the ability to produce numerous cuts without need to be resharpened.The cut is absolutely square and with very little if any tearout, I back up the cut in oak with extra material and no tearout is noticed. This tool absolutely meets all my expectations.

"Perfect cuts!" 2008-09-21
By David K. Dalpezzo (Glen Rock, PA)
I bought this blade set to give me a perfectly square (flat) miter for a spline key.

I'm building interior shutters for my windows - lower half of the window, hammered glass shutters (to let light in while providing privacy). My frame for the shutter is 2.25" oak with a channel for the glass and using 45 degree miter cuts on the corners. A very weak joint for this.

I needed to strengthen the joints with the spline key, but finding a blade that cut square was impossible. All of the teeth cut angles, and this leaves a "V" shaped base on the cut. Also, I needed 1/4" for the cut, not 1/8 which a normal blade would provide.

I have the Excalibur dado blade from Craftsman (do they make these anymore?) but that also doesn't cut a perfectly square channel. I really didn't want to invest $100+ in another dado blade (one with two outside blades using extra blades between them to provide the width).

I researched my needs and encountered this blade. I thought it answered my needs, so I ordered it.

Note: I built a jig to hold the shutter so the corner can be cut.

The blade, using the 1/4" cut, cut the corner without any chipping or pulling when it exited the joint (oak can easily splinter if one is not careful). I was able to quickly and easily cut all 8 corners on my set of shutters and insert my splines without issue. I did wait until my cuts were made before I planed down the spline board so I was able to ensure the proper fit.

So, if you are making shutters or anything else with a 45 degree corner that needs additional support besides glue, this blade (and appropriate jig) make terrific cuts for spline keys.

Note: In shear laziness, I didn't want to change blades to rip the spline key oak after planing it to the proper thickness, so I set up my rip fence with this blade - it doesn't do a good job ripping - way too much to cut at one time. It did the job, but I won't do that again!

"Good choice" 2008-07-03
By Philip L. Couchman (Crescent City, CA)
I used it right out of the box with the instructions for a jig and it performed as they say. I made 3 drawers for a computer desk and it only took a few tries to get the jig working very well.

"Freud Box Joint Blades" 2008-04-09
By Beverly A. Taylor
These blades make perfect 1/4" and 3/8" box joints. I've also use them for dadoe cuts. A great set.

Images Product

Buy Freud SBOX8 Box Joint Cutter Set, Cuts 1/4-Inch and 3/8-Inch grooves. Now

Bosch T30W 30-Piece Woodworking Jigsaw Set

2009-12-01T15:33:00.001-08:00

Buy Cheap Bosch T30W 30-Piece Woodworking Jigsaw Set

Buy Low Price From Here Now
Includes 30-Piece T-shank Woodworking Set - T30W, (10) 4" 10 TPI Jig Saw Blades - T101B, (10) 4" 5-6 TPI Jig Saw Blades - T101D, (10) 4" 5-6 TPI Jig Saw Blades - T144D
Readmore

Technical Details

- T101B 4-inch, 10TPI, HCS Bosch Shank Jigsaw Blade
- T101D 4-inch, 6TPI, HCS Bosch Shank Jigsaw Blade
- T144D 4-inch, 6TPI, HCS Bosch Shank Jigsaw Blade
See more technical details

"Jigsaw blades avert bear attack" 2009-07-13
By Lord Tallywhacker (Owl Farm Colorado)
As I was strolling through the woods near my home with my family, we heard the unsettling sound of a large four legged animal. We stopped, frozen with fear, as we watched a mother bear and her two cubs emerge from the bushes ahead of us. I wasn't worried for myself, all I could think about was the safety of my family, especially the lives of my two young daughters. The bear stopped when she saw us and went into a blind defensive rage and began to charge us. I had, I thought, nothing with me to defend my family. Then I remembered the Bosch T30W 30 Piece Woodworking Jigsaw set that I had just received fom Amazon.com!

I wrenched open the nicely packaged set of well made blades and jammed all 30 of them into the Bear's jugular veins. She reared back in agony and withrew immediately from the battle. When we got home I cleaned the blades with the recommended detergent and proceded to finish off building the rocking horse swingset I had promised my daughters. Thanks Bosch, you saved my life.

"Bosch Jigsaw Blades" 2006-07-17
By Donald L. Wiley
I've used Bosch jigsaws for at least 20 years and have found the Bosch jig saw blade to be the best to use with it. This particular order came with a wide selection, which makes it very desirable for cutting different materials.

I would highly recommend it as a good product and a good value.

Images Product

Buy Bosch T30W 30-Piece Woodworking Jigsaw Set Now

Forrest DH10807125 Duraline 10-Inch 80 Tooth HI-A/T Melamine and Plywood Cutting Saw Blade with 5/8-Inch Arbor

2009-12-01T10:33:00.001-08:00

Buy Cheap Forrest DH10807125 Duraline 10-Inch 80 Tooth HI-A/T Melamine and Plywood Cutting Saw Blade with 5/8-Inch Arbor

Buy Low Price From Here Now

Readmore

Technical Details

"melamine cutting blade" 2009-08-06
By D. Clarkson (Concord, NE United States)
I have only cut a few pieces so far with this blade in my table saw so I can't tell yet how long it will stay sharp but so far its flawless. I cut 3/4" melamine coated particle board with absolutely no chipping.

"Simply The Best" 2008-07-18
By D. Trelford (Scottsdale, Arizona)
Crosscuts in Pine with no splintering. Crosscuts in Oak with no splintering. Simply the best.

"works as advertised" 2008-02-28
By A. Smith (Camas, WA)
I've used this blade on a big kitchen's worth of pre-finished maple ply (~31 cabinet boxes)plus backs, plus drawer bottoms - plus a handful of melamine projects before. Both rip and crosscuts are clean with almost no tear out on the bottom. I've used panel saws with a scoring blade and this does about 95% as good a cut. Unless you're ready to spring for an Altendorf, this is the way to go.

It's also worth pointing out the less obvious moral to the story here: while there are some good general purpose blades (I also have a couple of Forrest Woodworker II blades - I like 'em) any time you use a general purpose blade you're making a compromise. When I built my workbench I bought a specific ripping blade - a Freud Glue Line - to rip a heck of a lot of 2" maple. The overall performance - speed of cut, lack of saw marks - was just better than the Woodworker II. While there are times when a general purpose blade is the way to go, if you're doing a bunch of similar cuts, you'll be much happier if you spring for a little more cash and blade changing time and use a purpose desinged blade.

"Do pass up this Blade" 2007-12-19
By James G. Jones
I am making my own kitchen cabinets with Red Oak and ¾ inch prefinished birch plywood. After many frustrating attempts to rip and cross cut the prefinished plywood with other manufactures blades without any lifting and splintering, I decided to try a Forrest Duraline HI-AT 10" 80 tooth blade. I have a Jet 10-inch 3hp cabinet saw and rechecked all table to blade dimensions, splitter and fence settings to the new blade, no adjustment were needed.

Wow, what a blade. Sharp, smooth, quiet no drag, no vibration (my zero clearance doesn't walk at all) and NO lifting or splinters of the prefinished layer of the birch plywood. What a difference this blade has made in the results and woodworking pleasure. All 90 and less than 90 degree cross & rip cuts are smooth without sign of burn or vibration.

Forrest also engraves a serial number in the blade with a lifetime satisfaction warranty. Full instructions on care and sharpening. I have NEVER experienced this kind of detail from any blade manufacture. I will stick with Amana and Freud for Router bits and cutters but I will be purchasing Forrest blades from now on.

Jim,

Rochester, N.Y.

"Forrest quality" 2007-08-13
By D. Ryan (Bay Area, CA)
What a great blade! Doesn't chip melamine or ply, blade stays true over hundreds of cuts. But that's why I buy Forrest blades!

Images Product

Buy Forrest DH10807125 Duraline 10-Inch 80 Tooth HI-A/T Melamine and Plywood Cutting Saw Blade with 5/8-Inch Arbor Now

Irwin 24030 Marathon 7-1/4-Inch 24 Tooth ATB Framing and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor

2009-11-30T16:53:00.001-08:00

Buy Cheap Irwin 24030 Marathon 7-1/4-Inch 24 Tooth ATB Framing and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Buy Low Price From Here Now
7-1/4", 24 Tooth C3 Carbide Tipped Marathon Circular Saw Blade, 5/8" Universal Arbor, Thin Kerf For Faster, Cleaner Cuts, Heat Vents, Reduce Heat That Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances, Bulk.
Readmore

Technical Details

- Thin kerf design
- Hardened plate
- Specially engineered heat vents
- Unique shoulder design
See more technical details

"Circular Saw Blade Purchase" 2009-07-07
By Roger Imerman (Panama)
This set was well packaged and promptly and accurately shipped - great because this hole size is unavailable in this country. A great purchase experience!

"good blade" 2009-01-31
By Robert C. Wollam (Northern California)
The only blades I use for my worm drive saws, one can't go wrong with them.

"best blade made" 2004-01-21
By 98043 (Seattle, WA)
this is the best blade made for frameing concret decking anything really its the only blade i will put on my saws i buy these blades by the box of 50 or 100 for my company i have been useing them for the last ten years and nothing has come close the performance of these blades and the teeth last a long time even when cuting form panles so stick whit the IRWIN Marathon blade and you wont be disapointed

Images Product

Buy Irwin 24030 Marathon 7-1/4-Inch 24 Tooth ATB Framing and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor Now